Crestron TPS-4000 manual

Crestron TPS-4000
9.8 · 1
PDF manual
 · 48 pages
English
manualCrestron TPS-4000

10.4 Inch Tilt Touchpanel Crestron Isys

®

TPS-4000

(2) this device must accept any interference received, including interference that may
cause undesired operation.

Setup

Network Wiring

CAUTION: Use only Crestron power supplies for Crestron equipment. Failure to
do so could cause equipment damage or void the Crestron warranty.
CAUTION: Provide sufficient power to the system. Insufficient power can lead to
unpredictable results or damage to the equipment. Please use the Crestron Power
Calculator (http://www.crestron.com/ dealer-tech_resources/power_calculator.asp)
to
help calculate how much power is needed for the system.
CAUTION: Possible equipment damage if miswired.
NOTE: When installing network wiring, refer to the latest revision of the wiring
diagram(s) appropriate to your specific system configuration, available from the
Downloads | Product Manuals | Wiring Diagrams section of the Crestron website
(www.crestron.com).
NOTE: Do not power up system until all wiring is verified. Care should be taken to
ensure data (Y, Z) and power (24, G) connections are not crossed.
When calculating the wire gauge for a particular Cresnet run, the length of the run
and the power factor of each Cresnet unit to be connected must be taken into
consideration. If Cresnet units are to be daisy-chained on the run, the power factor of
each network unit to be daisy-chained must be added together to determine the
power factor of the entire chain. The length of the run in feet and the power factor of
the run should be used in the following resistance equation to calculate the value on
the right side of the equation.
Resistance Equation
R = Resistance (refer to following table).
L = Length of run (or chain) in feet.
PF = Power factor of entire run
(
or chain
)
.

R <

L x PF

40,000

Where:
The required wire gauge should be chosen such that the resistance value is less than
the value calculated in the resistance equation. Refer to the following table.
Wire Gauge Values
RESISTANCE (R) WIRE GAUGE
4
16
6
18
10
20
15
22
13
Doubled CAT5
8.7
Tripled CAT5
8 10.4 Inch Tilt Touchpanel: Crestron Isys
®
TPS-4000 Operations Guide - DOC. 6268

Manual

View the manual for the Crestron TPS-4000 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 9.8. This manual is available in the following languages: English. Do you have a question about the Crestron TPS-4000 or do you need help? Ask your question here

Need help?

Do you have a question about the Crestron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Crestron TPS-4000 specifications

Below you will find the product specifications and the manual specifications of the Crestron TPS-4000.

The not categorized Crestron TPS-4000 features a 10.4-inch TFT display with a resolution of 640 x 480 pixels. The display brightness is 450 cd/m², with a contrast ratio of 600:1. The touchscreen technology used is resistive, providing ease of use. It has an aspect ratio of 4:3 and a color depth of 18 bit. The viewing angles are 70° horizontally and 55° vertically. Additionally, it is equipped with built-in speakers for audio output. The TPS-4000 is designed for in tabletop mounting, offering a convenient setup option. However, it does not have Wi-Fi connectivity capabilities, limiting its wireless functionality. Overall, the product provides a standard display size and resolution suitable for various applications. Please note that the information provided above is based solely on the technical specifications of the Crestron TPS-4000 and does not include any additional subjective opinions or evaluations.

General
BrandCrestron
ModelTPS-4000 | TPS-4000
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Display
Display diagonal10.4 "
Display typeTFT
Display resolution640 x 480 pixels
Display brightness450 cd/m²
Touchscreen technologyResistive
Aspect ratio4:3
Color depth18 bit
Contrast ratio600:1
Viewing angle, horizontal70 °
Viewing angle, vertical55 °
Audio
Built-in speaker(s)Yes
Number of speakers2
Speaker power2 W
Performance
Mounting typeIn tabletop
Wi-FiNo
Product colorBlack
RAM capacity8 MB
Internal memory8 MB
Operational conditions
Operating relative humidity (H-H)10 - 90 %
Operating temperature (T-T)10 - 45 °C
Weight & dimensions
Width278.3 mm
Depth236.7 mm
Height254.8 mm
Weight2110 g
Ports & interfaces
RJ-45 ports quantity1
Power
Power consumption (typical)22 W
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crestron TPS-4000 below.

What is the weight of the Crestron TPS-4000?

The Crestron TPS-4000 has a weight of 2110 g.

What is the screen size of the Crestron TPS-4000?

The screen size of the Crestron TPS-4000 is 10.4 ".

What is the height of the Crestron TPS-4000?

The Crestron TPS-4000 has a height of 254.8 mm.

What is the screen resolution of the display of the Crestron TPS-4000?

The screen resolution of the Crestron TPS-4000 is 640 x 480 pixels.

What is the width of the Crestron TPS-4000?

The Crestron TPS-4000 has a width of 278.3 mm.

What is the depth of the Crestron TPS-4000?

The Crestron TPS-4000 has a depth of 236.7 mm.

Is the manual of the Crestron TPS-4000 available in English?

Yes, the manual of the Crestron TPS-4000 is available in English .

Is your question not listed? Ask your question here

No results