Crestron DM-TX-201-C manual

Crestron DM-TX-201-C
6.5 · 2
PDF manual
 · 106 pages
English
manualCrestron DM-TX-201-C
48 Crestron® DigitalMedia System Design Guide 4546N

Ultra Cables, 8G Cables, and Accessories

DM-CBL-ULTRA-NP and DM-CBL-ULTRA-P

DM-CBL-ULTRAisahigh-bandwidthCAT7ashieldedtwistedpair(S/FTP)cable.Thiscable
isengineeredtodeliver optimum performancefor 10GBdatanetworkingand4Kultra
high-definitionAVsignaldistributionapplications.DM-CBL-ULTRAis availablein
plenum-ratedor riser-ratedtypes.
l ExceedsHDMIspecificationsrequiringless than
onepixelerror per billion
l Everyspoolindividuallytestedandcertified
l Measurementmarkings onouter jacket
l AvailableintypeCMR-ratedfor riserandother
non-plenum installation,andCMP-ratedfor
plenum installation

DM-CBL-8G-NP and DM-CBL-8G-P

CrestronDigitalMedia8Gcableisa350MHz-certifiedtwisted-pair cablewithoverallfoil
shield(F/UTP)engineeredtodeliver optimum performancefor useindatanetworkingand
high-definitionAVsignaldistributionapplications.DM-CBL-8Gisavailableinplenum-rated
or riser-ratedtypes.
l ManufacturedandtestedtoexceedCAT5e
specificationsandqualifiedfor usewherever
high-qualityshieldedCAT5eisrequired
l EnsuresCrestronguaranteedperformancefor
DigitalMedia8G+andSonnex®Link
l Highlyrecommendedfor usewithHDBaseT
l Spools individuallytestedandcertified
l AvailableintypeCMR-ratedfor riserandother
non-plenum installation,andCMP-ratedfor
plenum installation

Manual

View the manual for the Crestron DM-TX-201-C here, for free. This manual comes under the category wifi repeaters and has been rated by 2 people with an average of a 6.5. This manual is available in the following languages: English. Do you have a question about the Crestron DM-TX-201-C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Crestron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Crestron DM-TX-201-C specifications

Below you will find the product specifications and the manual specifications of the Crestron DM-TX-201-C.

The Crestron DM-TX-201-C is a network transmitter that is designed to enhance the WiFi signal in your home or office. With Ethernet LAN data rates of 10 and 100 Mbit/s, it offers fast and reliable connectivity. Featuring both full and half duplex system capabilities, the DM-TX-201-C can effectively handle data transmission in both directions. Auto-negotiation is also supported, allowing for seamless communication between devices. Equipped with two RJ-45 ports on the transmitter, this device can easily connect to other Ethernet-enabled devices. It also includes a DC-in jack for power supply and LED indicators to provide visual feedback on the device's status. The Crestron DM-TX-201-C complies with IEEE 802.3at networking standards, ensuring compatibility with various network components. With an output voltage of 24 V and output current of 0.75 A, this network transmitter offers sufficient power to maintain a stable and strong WiFi connection. In summary, the Crestron DM-TX-201-C is a reliable and versatile network transmitter that enhances your WiFi signal. With its multiple ports, compatibility with networking standards, and power supply capabilities, it provides a convenient solution for improving connectivity in your home or office environment.

General
BrandCrestron
ModelDM-TX-201-C | DM-TX-201-C
Productwifi repeater
LanguageEnglish
FiletypeUser manual (PDF), Datasheet (PDF)
Performance
TypeNetwork transmitter
Maximum transfer distance- m
Ethernet LAN data rates10, 100 Mbit/s
Duplex systemFull, Half
Auto-negotiationYes
Network
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.3at
Ports & interfaces
RJ-45 ports quantity (transmitter)2
DC-in jackYes
Design
Product colorBlack
LED indicatorsYes
Reset buttonYes
Power
Output voltage24 V
Output current0.75 A
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Weight & dimensions
Width187 mm
Depth32 mm
Height165 mm
Weight721 g
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crestron DM-TX-201-C below.

What is the weight of the Crestron DM-TX-201-C?

The Crestron DM-TX-201-C has a weight of 721 g.

What is the difference between a router and a modem?

A modem provides the internet connection via the internet provider. A router then distributes the Internet signal to the devices connected to the router.

What does the download speed on the internet depend on?

The download speed on the internet depends on the type of connection you have. If you have a 25 Mb/s connection this means that theoretically you should be able to download 25 MB per second.

Is WIFI radiation harmful?

WIFI is a radio frequency signal in the form of non-ionising radiation. This radiation cannot damage cells and tissues and is therefore not harmful to human health.

What is the height of the Crestron DM-TX-201-C?

The Crestron DM-TX-201-C has a height of 165 mm.

What is the width of the Crestron DM-TX-201-C?

The Crestron DM-TX-201-C has a width of 187 mm.

What is the depth of the Crestron DM-TX-201-C?

The Crestron DM-TX-201-C has a depth of 32 mm.

Does the Crestron DM-TX-201-C support auto-negotiation?

Yes, the Crestron DM-TX-201-C supports auto-negotiation. This means that it can automatically negotiate and select the appropriate speed and duplex settings for the connection, making it easier for the user to set up and use.

How many RJ-45 ports does the Crestron DM-TX-201-C have?

The Crestron DM-TX-201-C has 2 RJ-45 ports. This allows for easy connectivity and networking with multiple devices.

What are the Ethernet LAN data rates of the Crestron DM-TX-201-C?

The Crestron DM-TX-201-C supports Ethernet LAN data rates of 10 and 100 Mbit/s. This means that it can handle both Fast Ethernet (10/100) speeds, providing flexibility in networking options.

Does the Crestron DM-TX-201-C have LED indicators?

Yes, the Crestron DM-TX-201-C has LED indicators. These indicators can provide visual feedback and status information about the device, making it easier for the user to monitor and troubleshoot.

What are the output voltage and current of the Crestron DM-TX-201-C?

The Crestron DM-TX-201-C has an output voltage of 24 V and an output current of 0.75 A. This means that it provides a stable and sufficient power supply for connected devices, ensuring reliable operation.

How do I connect the Crestron DM-TX-201-C wifi repeater to my existing Crestron DigitalMedia System?

To connect the Crestron DM-TX-201-C wifi repeater to your existing Crestron DigitalMedia System, follow these steps: 1. Ensure that your Crestron DigitalMedia System is properly set up and functioning. 2. Locate the DM-TX-201-C wifi repeater and identify the available connection options. The DM-TX-201-C has HDMI and RGB/component video inputs, as well as a USB type B HID device port. 3. Choose the appropriate connection method based on your system requirements. If you are using a CAT5e or better cable, connect the DM-TX-201-C to the DigitalMedia switcher or receiver using the CAT5e cable. If you are using a fiber connection, connect the DM-TX-201-C to the switcher or receiver using a multimode fiber strand. 4. If you are using the HDMI or RGB/component video inputs, connect the corresponding cables from your video sources to the DM-TX-201-C. 5. If you need to connect a computer to the DM-TX-201-C, use the USB type B HID device port. 6. Once all the connections are made, power on the DM-TX-201-C and ensure that it is properly recognized by your Crestron DigitalMedia System. By following these steps, you will be able to connect the Crestron DM-TX-201-C wifi repeater to your existing Crestron DigitalMedia System.

Why is the DM-TX-201-C wifi repeater not transmitting a signal to the receiver?

There could be several reasons why the DM-TX-201-C wifi repeater is not transmitting a signal to the receiver. Here are some possible causes and troubleshooting steps: 1. Check the connection between the DM-TX-201-C and the receiver. Ensure that the cables are securely plugged in and that there are no loose connections. 2. Verify that the DM-TX-201-C is powered on and functioning properly. Check the power indicator lights on the device to ensure it is receiving power. 3. Make sure that the DM-TX-201-C is properly configured to transmit the signal. Check the settings and ensure that the correct input source is selected. 4. Check the receiver to ensure that it is properly configured to receive the signal from the DM-TX-201-C. Verify that the receiver is set to the correct input source. 5. If using a wireless connection, check the wifi settings on both the DM-TX-201-C and the receiver. Ensure that they are connected to the same wifi network and that the wifi signal is strong enough for transmission. 6. If the issue persists, try resetting both the DM-TX-201-C and the receiver. Power off both devices, wait for a few seconds, and then power them back on. By following these troubleshooting steps, you should be able to identify and resolve the issue with the DM-TX-201-C wifi repeater not transmitting a signal to the receiver.

How do I troubleshoot connectivity issues with the DM-TX-201-C wifi repeater?

To troubleshoot connectivity issues with the DM-TX-201-C wifi repeater, follow these steps: 1. Check the physical connections: Ensure that all cables are securely plugged in and that there are no loose connections between the DM-TX-201-C and other devices in the system. 2. Verify power and status indicators: Check the power indicator lights on the DM-TX-201-C to ensure it is receiving power. Also, check for any status indicators that may indicate connectivity issues. 3. Check network settings: Ensure that the DM-TX-201-C is connected to the correct wifi network and that the network settings are properly configured. Verify the wifi password and network security settings. 4. Restart devices: Power off the DM-TX-201-C, the receiver, and any other devices in the system. Wait for a few seconds, then power them back on. This can help resolve temporary connectivity issues. 5. Update firmware: Check if there are any firmware updates available for the DM-TX-201-C. If so, follow the instructions provided in the manual to update the firmware. 6. Reset network settings: If all else fails, you can try resetting the network settings on the DM-TX-201-C. Refer to the manual for instructions on how to perform a network reset. By following these troubleshooting steps, you should be able to identify and resolve connectivity issues with the DM-TX-201-C wifi repeater.

What are the differences between the DM-TX-201-C and the DM-TX-201-S models?

The DM-TX-201-C wifi repeater and the DM-TX-201-S model are two different products. However, based on the available information, it seems that the DM-TX-201-S model is not mentioned in the manual of the DM-TX-201-C wifi repeater. Therefore, it is not possible to provide specific differences between these two models without referring to the manual or external sources. It is recommended to consult the official documentation or contact the manufacturer for detailed information on the differences between the DM-TX-201-C and DM-TX-201-S models.

How do I configure the DM-TX-201-C wifi repeater to work with different types of transmitters?

To configure the DM-TX-201-C wifi repeater with different types of transmitters, follow these steps: 1. Identify the type of transmitter you want to connect to the DM-TX-201-C. The DM-TX-201-C is compatible with various transmitters, including DM transmitters and fiber transmitters. 2. For DM transmitters, such as the DM-TX-201-S or DM-TX-201-S2, connect the transmitter to the DM-TX-201-C using the appropriate cables. The DM-TX-201-C has HDMI and RGB/component video inputs, so ensure that you use the correct cables for your specific transmitter. 3. If you are using a fiber transmitter, such as the DMF-TX-4K-SFP, connect the transmitter to the DM-TX-201-C using a multimode fiber strand. The DM-TX-201-C also has HDMI and RGB/component video inputs, so make sure to connect the appropriate cables. 4. Once the connections are made, power on the DM-TX-201-C and the transmitter. The DM-TX-201-C should automatically detect the transmitter and establish a connection. 5. If necessary, configure the settings on the DM-TX-201-C and the transmitter to ensure proper signal transmission. Refer to the manual for specific instructions on configuring the settings for your particular transmitter. By following these steps, you should be able to configure the DM-TX-201-C wifi repeater to work with different types of transmitters.

How do I connect the Crestron DM-TX-201-C wifi repeater to the Crestron DigitalMedia System?

To connect the Crestron DM-TX-201-C wifi repeater to the Crestron DigitalMedia System, follow these steps: 1. Ensure that you have a CAT5e or better cable available for the connection. 2. Locate the DM-TX-201-C wifi repeater and identify the HDMI and RGB/component video inputs on the device. 3. Connect the HDMI or RGB/component video output from your video source (such as a DVD player or computer) to the corresponding input on the DM-TX-201-C wifi repeater. 4. Use the CAT5e or better cable to connect the DM-TX-201-C wifi repeater to the DigitalMedia switcher or receiver in your DigitalMedia System. Make sure to use the appropriate input port on the switcher or receiver. 5. If you have an analog audio source, connect it to the analog audio input on the DM-TX-201-C wifi repeater. 6. Optionally, if you have a local HDMI monitor that you want to connect, use an HDMI cable to connect the HDMI output on the DM-TX-201-C wifi repeater to the HDMI input on the monitor. 7. Power on the DM-TX-201-C wifi repeater and the DigitalMedia System. Once these steps are completed, the Crestron DM-TX-201-C wifi repeater should be successfully connected to the Crestron DigitalMedia System, allowing you to extend the wireless range of your system.

What should I do if the DM-TX-201-C wifi repeater is not transmitting a signal?

If the Crestron DM-TX-201-C wifi repeater is not transmitting a signal, you can try the following steps to troubleshoot the issue: 1. Check the power connection of the DM-TX-201-C wifi repeater and ensure that it is properly plugged in and receiving power. 2. Verify the input source connected to the DM-TX-201-C wifi repeater. Make sure that the source device is powered on and sending a signal. 3. Inspect the cables connecting the DM-TX-201-C wifi repeater to the source device and the DigitalMedia System. Ensure that the cables are securely connected and not damaged. 4. Check the settings on the DigitalMedia System to ensure that the DM-TX-201-C wifi repeater is configured correctly. Verify that the repeater is assigned to the appropriate output port and that the output port is enabled. 5. Restart the DM-TX-201-C wifi repeater and the DigitalMedia System. Power off both devices, wait for a few seconds, and then power them back on. 6. If the issue persists, try connecting the source device directly to the DigitalMedia System without using the DM-TX-201-C wifi repeater. This will help determine if the repeater is the cause of the problem. If these troubleshooting steps do not resolve the issue, it is recommended to consult the Crestron DM-TX-201-C wifi repeater manual or contact Crestron support for further assistance.

How can I troubleshoot connectivity issues with the DM-TX-201-C wifi repeater and the DM8G+ transmitter?

To troubleshoot connectivity issues between the Crestron DM-TX-201-C wifi repeater and the DM8G+ transmitter, you can follow these steps: 1. Check the physical connections: Ensure that the DM8G+ transmitter is properly connected to the DM-TX-201-C wifi repeater using a CAT5e or better cable. Make sure the cable is securely plugged into both devices. 2. Verify power and status: Confirm that both the DM-TX-201-C wifi repeater and the DM8G+ transmitter are receiving power and turned on. Check the LED indicators on both devices to ensure they are functioning correctly. 3. Check the network settings: Ensure that the DM-TX-201-C wifi repeater and the DM8G+ transmitter are configured with compatible network settings. Verify that they are on the same network and using the appropriate IP addresses, subnet masks, and gateway settings. 4. Update firmware: Check if there are any firmware updates available for the DM-TX-201-C wifi repeater and the DM8G+ transmitter. If updates are available, follow the instructions provided by Crestron to update the firmware. 5. Reset and reconfigure: If the issue persists, try resetting both the DM-TX-201-C wifi repeater and the DM8G+ transmitter to their factory default settings. Then, reconfigure the devices according to the instructions in the manual. If these troubleshooting steps do not resolve the connectivity issues, it is recommended to consult the Crestron support team for further assistance.

What steps should I follow to troubleshoot audio/video synchronization issues with the DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter?

To troubleshoot audio/video synchronization issues with the Crestron DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter, you can follow these steps: 1. Check the physical connections: Ensure that the DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter are properly connected using a CAT5e or better cable. Make sure the cable is securely plugged into both devices. 2. Verify the audio/video settings: Confirm that the audio and video settings on both the DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter are configured correctly. Check the input and output settings, including resolution, aspect ratio, and audio format. 3. Adjust the synchronization settings: Some Crestron devices have built-in synchronization settings to compensate for audio/video delays. Check the manual or settings menu of the DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter for any synchronization options. Adjust these settings to minimize any audio/video lag. 4. Update firmware: Check if there are any firmware updates available for the DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter. If updates are available, follow the instructions provided by Crestron to update the firmware. 5. Test with different sources and displays: Try connecting different audio/video sources and displays to the DM-TX-201-C wifi repeater and the DM-TX-401-C transmitter. This will help determine if the synchronization issue is specific to certain devices or if it persists across different configurations. If these troubleshooting steps do not resolve the audio/video synchronization issues, it is recommended to consult the Crestron support team for further assistance.

How do I configure the DM-TX-201-C wifi repeater to work with the DM-TX-4KZ-202-C transmitter?

To configure the DM-TX-201-C wifi repeater with the DM-TX-4KZ-202-C transmitter, follow these steps: 1. Connect the DM-TX-201-C wifi repeater and the DM-TX-4KZ-202-C transmitter using a CAT5e or better cable. Ensure that the cable is securely plugged into both devices. 2. Power on both the DM-TX-201-C wifi repeater and the DM-TX-4KZ-202-C transmitter. 3. Access the configuration settings of the DM-TX-201-C wifi repeater. This can usually be done through a web-based interface or a control system. 4. In the configuration settings, locate the option to add or configure a transmitter. Select the DM-TX-4KZ-202-C transmitter from the available options. 5. Follow the on-screen instructions or prompts to complete the configuration process. This may involve specifying the input and output settings, such as resolution, aspect ratio, and audio format. 6. Save the configuration settings and exit the configuration interface. 7. Test the connectivity between the DM-TX-201-C wifi repeater and the DM-TX-4KZ-202-C transmitter by sending an audio/video signal from a source device to a display device. Ensure that the signal is transmitted and received without any synchronization or quality issues. By following these steps, you should be able to successfully configure the DM-TX-201-C wifi repeater to work with the DM-TX-4KZ-202-C transmitter in your Crestron DigitalMedia System.

Is the manual of the Crestron DM-TX-201-C available in English?

Yes, the manual of the Crestron DM-TX-201-C is available in English .

Is your question not listed? Ask your question here

No results