Crestron CNXRY-8 manual

Crestron CNXRY-8
7.5 · 1
PDF manual
 · 12 pages
English
manualCrestron CNXRY-8

CNX Relay Output Expansion Card Crestron CNXRY-8

Leading Specifications

The table below provides a summary of leading specifications for the CNXRY-8.
Dimensions and weight are approximations rounded to the nearest hundredth unit.
Leading Specifications of the CNXRY-8
SPECIFICATION DETAILS
Power Requirements
24 VDC, network power; 3 Watts
Maximum Rating per Contact
1A, 30 VAC/VDC
SIMPL Windows
Version 1.19.08 or later
CNX Operating System
Version 5.01.00 or later
CNX Monitor
Version 2.00 or later
Dimensions
Height: 0.98 in (2.49 cm)
Width: 5.00 in (12.70 cm)
As of the date of manufacture, the unit has been tested and found to comply with
specifications for CE marking.

Setup

Installation

Items required to install the CNXRY-8 are already attached to the unit. The only
tools required are a Phillips tip screwdriver and a grounding strap. Follow the
assembly procedure below.
CAUTION: The CNXRY-8 contains electrostatic sensitive devices (ESD); observe
precautions for handling ESDs to avoid damaging the card.
NOTE: If installing the CNXRY-8 into a CNMSX-AV, it is assumed that the
CNXCAGE has been installed.
1. Disconnect power from the CNMSX.
2. Use the Phillips tip screwdriver and remove two screws and blank
faceplate from the control system.
3. Align the CNXRY-8 with the card guides in the open slot and slide the
expansion card into postion.
4. Firmly press both ends of the CNXRY-8 faceplate to seat the
expansion card into the control system connector.
5. Tighten the thumb-nail screws to secure the CNXRY-8 to the control
system.
6. Reapply power to the CNMSX.
2 CNX Relay Output Expansion Card: CNXRY-8 Operations Guide - DOC. 8121

Manual

View the manual for the Crestron CNXRY-8 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Crestron CNXRY-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Crestron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Crestron CNXRY-8 specifications

Below you will find the product specifications and the manual specifications of the Crestron CNXRY-8.

General
BrandCrestron
ModelCNXRY-8 | CNXRY-8
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorBlack
Number of built-in relays8
Weight & dimensions
Dimensions (WxDxH)127 x 172.1 x 24.9 mm
Operational conditions
Operating temperature (T-T)5 - 45 °C
Power
Current0.125 A
DC voltage range24 - 24 V
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crestron CNXRY-8 below.

Is the manual of the Crestron CNXRY-8 available in English?

Yes, the manual of the Crestron CNXRY-8 is available in English .

Is your question not listed? Ask your question here

No results