Crestron CEN-IDOCV-DSW-W-T manual

Crestron CEN-IDOCV-DSW-W-T
5.7 · 1
PDF manual
 · 40 pages
English
manualCrestron CEN-IDOCV-DSW-W-T

Wall Mount Interface for Apple

®

iPod

®

Crestron CEN-IDOCV-DSW

12 Wall Mount Interface for Apple
®
iPod
®
: CEN-IDOCV-DSW Operations & Installation Guide – DOC. 6827A

Identity Code

The IP ID is set within the CEN-IDOCV-DSW’s IP table using Crestron Toolbox.
For information on setting an IP table, refer to the Crestron Toolbox help file. The IP
IDs of multiple CEN-IDOCV-DSW devices in the same system must be unique.
When setting the IP ID, consider the following:
The IP ID of each unit must match an IP ID specified in the SIMPL™
Windows program.
Each device using IP to communicate with a control system must have a
unique IP ID.

Installation

The CEN-IDOCV-DSW installs simply and cleanly into existing or newly
constructed walls by using the pre-construction wall mount back box
(BB-IDOCV-DSW) or the post-construction mounting kit
(BB-WMK-IDOCV-DSW, both not supplied).
NOTE: Pre-construction refers to framed walls prior to hanging drywall or
paneling. Post-construction refers to framed walls with drywall or paneling hung.

CEN-IDOCV-DSW Mounting

The only tools required (not supplied) is a #2 Phillips tip screwdriver and
1/16” Allen wrench. Refer to the image on the following page for visual guidance.
1. If a metal cover plate is being used to cover an opening in the wall, use a
#2 Phillips screwdriver to loosen and remove the four screws and the metal
cover plate.
2. Connect all required cables to the CEN-IDOCV-DSW. Refer to “Hardware
Hookup” which starts on page 14 for details.
3. Insert the CEN-IDOCV-DSW (with its plastic door removed) into the
mounting option and align the four screw holes.
4. Insert and tighten the four supplied screws (finger tight and use a #2
Phillips screwdriver, tighten an additional 1/8-turn).
5. Cover the mounted unit with the plastic door. Using the 1/16” Allen
wrench tighten the plastic door mounting screw.

Manual

View the manual for the Crestron CEN-IDOCV-DSW-W-T here, for free. This manual comes under the category cradles & docking stations and has been rated by 1 people with an average of a 5.7. This manual is available in the following languages: English. Do you have a question about the Crestron CEN-IDOCV-DSW-W-T or do you need help? Ask your question here

Need help?

Do you have a question about the Crestron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Crestron CEN-IDOCV-DSW-W-T specifications

Below you will find the product specifications and the manual specifications of the Crestron CEN-IDOCV-DSW-W-T.

General
BrandCrestron
ModelCEN-IDOCV-DSW-W-T | CEN-IDOCV-DSW-W-T
Productcradle / docking station
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Basic device typeMP3/MP4 player
Brand compatibilityApple
CompatibilityiPod
Product colorWhite
Ports & interfaces
Docking connector typeApple 30-pin
USB 2.0 ports quantity1
Audio outputNo
HDMINo
Ethernet LAN (RJ-45) ports1
Network
BluetoothNo
Ethernet LANYes
Power
Power source typePoE
Weight & dimensions
Width121 mm
Depth79 mm
Height149 mm
Weight360 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crestron CEN-IDOCV-DSW-W-T below.

What is the weight of the Crestron CEN-IDOCV-DSW-W-T?

The Crestron CEN-IDOCV-DSW-W-T has a weight of 360 g.

What is the height of the Crestron CEN-IDOCV-DSW-W-T?

The Crestron CEN-IDOCV-DSW-W-T has a height of 149 mm.

What is the width of the Crestron CEN-IDOCV-DSW-W-T?

The Crestron CEN-IDOCV-DSW-W-T has a width of 121 mm.

What is the depth of the Crestron CEN-IDOCV-DSW-W-T?

The Crestron CEN-IDOCV-DSW-W-T has a depth of 79 mm.

Is the manual of the Crestron CEN-IDOCV-DSW-W-T available in English?

Yes, the manual of the Crestron CEN-IDOCV-DSW-W-T is available in English .

Is your question not listed? Ask your question here

No results