View the manual for the Crane AU4-PF-7GA here, for free. This manual comes under the category sport watches and has been rated by 1 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Crane AU4-PF-7GA or do you need help? Ask your question here
The Crane AU4-PF-7GA sports watch is a durable and functional accessory for athletes and outdoor enthusiasts. Designed with a sturdy construction, this watch can withstand tough conditions and is water resistant up to 100 meters. Its precise quartz movement ensures accurate timekeeping, while the mineral crystal face provides protection against scratches and impact. The watch features a chronograph function, allowing users to track elapsed time during activities. Additionally, the luminous hands and markers ensure visibility in low-light conditions. The adjustable silicone strap offers a comfortable fit for various wrist sizes, making it suitable for daily wear or sports activities. The watch also includes a date display for added convenience. Overall, the Crane AU4-PF-7GA sports watch is a reliable timepiece for those seeking a blend of style and functionality in their active lifestyle.
| Brand | Crane |
| Model | AU4-PF-7GA |
| Product | sport watch |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Crane AU4-PF-7GA below.
It is sensible for you to switch off your sport watch at night, this ensures longer battery life.
No, no internet is required to receive GPS.
The abbreviation GPS stands for 'Global Positioning System'.
GPS is a system that can be used all over the globe to determine your location by means of satellites.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
An adult's resting heart rate is between 60 and 100 beats per minute.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
To adjust the time and date on the Crane AU4-PF-7GA sport watch, follow these steps: 1. Press and hold the "MODE" key until you access the time mode, displayed as "TIME". 2. The time mode will show the time in the bottom segment of the display. Press the "SELECT" key between the display "Day and Month" to change between "Week day and Day". 3. Before adjusting the basic settings, calculate your step length for walking and running. Walk or run a predetermined distance (e.g., 100 meters) and calculate your step length by dividing the distance by the number of steps. 4. To begin the basic setting, press the "MODE" key for approximately 3 seconds. Use the "ST./STP." or the "SELECT" key to choose either German (DEU) or English (ENG). Confirm your selection by pressing the "MODE" key. 5. The seconds will flash. Use the "ST./STP." or the "SELECT" key to reset the seconds to zero. Confirm your selection by pressing the "MODE" key. 6. The minutes will flash. Increase the minutes with the "ST./STP." key or reduce it with the "SELECT" key. Confirm your selection by pressing the "MODE" key. 7. Set the other settings as described above, including hours, year, month, day, day format, time format, hourly alarm, key tones, gender, year of birth, unit (metric or British), size, weight, step length for walking, step length for running, and daily reset. 8. Press the "MODE" key for approximately 3 seconds to save all the settings. By following these steps, you can adjust the time and date on your Crane AU4-PF-7GA sport watch.
If the time on your Crane AU4-PF-7GA sport watch is not accurate, there are a few possible reasons: 1. Incorrect Time Zone: Check if the time zone setting on your watch is correct. If it is set to a different time zone, adjust it to your local time zone. 2. Daylight Saving Time: If the time on your watch is off by one hour during daylight saving time, make sure the daylight saving time setting is enabled. Adjust the setting accordingly. 3. Weak Battery: A weak battery can affect the accuracy of the time. Replace the battery with a new one if necessary. 4. Synchronization Issue: If the watch is not synchronized with a time signal, it may drift over time. Try synchronizing the watch with a time signal, such as a radio-controlled clock or an online time server. 5. Manual Time Adjustment: If none of the above solutions work, manually adjust the time on your watch by following the steps mentioned in the manual. Ensure that you set the correct hours, minutes, and seconds. By checking these factors and making the necessary adjustments, you should be able to resolve any issues with the accuracy of the time on your Crane AU4-PF-7GA sport watch.
To set the training zones and target steps on the Crane AU4-PF-7GA sport watch, follow these steps: 1. Press and hold the "MODE" key until you access the training mode, displayed as "WORK". 2. Use the "SELECT" key to choose the desired training data to be displayed in the upper segment of the display. Options include training time, current pace, average pace, distance, steps, remaining steps, current speed, average speed, calorie consumption, and fat burning. 3. Press and hold the "MODE" key for approximately 3 seconds to enter the setting mode for training zones and target steps. 4. Use the "ST./STP." or "SELECT" key to select the predefined training zones: health (HEALTH), fat burning (FAT-B), and aerobic (AROBIC). Alternatively, you can choose the freely adjustable training zone (MY). Confirm your selection by pressing the "MODE" key. 5. The pulse value for the lower pulse limit will flash, and the percentage of the maximum pulse will be displayed on the right. Set the pulse value using the "ST./STP." or "SELECT" key. Confirm your selection by pressing the "MODE" key. 6. The pulse value for the upper pulse limit will flash, and the percentage of the maximum pulse will be displayed on the right. Set the pulse value using the "ST./STP." or "SELECT" key. Confirm your selection by pressing the "MODE" key. 7. The below alert setting will be displayed. Use the "ST./STP." or "SELECT" key to select "ON" to activate the alarm or "OFF" to deactivate it. Confirm your selection by pressing the "MODE" key. 8. The above alert setting will be displayed. Use the "ST./STP." or "SELECT" key to select "ON" to activate the alarm or "OFF" to deactivate it. Confirm your selection by pressing the "MODE" key. 9. The "TARGET STEP" setting will be displayed. The number of steps will flash. Use the "ST./STP." or "SELECT" key to set your target number of steps. Confirm your selection by pressing the "MODE" key. 10. Press the "MODE" key for approximately 3 seconds to save all the settings. By following these steps, you can set the training zones and target steps on your Crane AU4-PF-7GA sport watch.
If the training progress is not being tracked correctly on your Crane AU4-PF-7GA sport watch, there are a few possible reasons: 1. Incorrect Settings: Check if the training mode settings, such as training zones and target steps, are properly configured. Make sure you have set the correct values for your desired training intensity and step goals. 2. Improper Wearing: Ensure that you are wearing the watch correctly and securely on your wrist. A loose or improper fit may affect the accuracy of the tracking. 3. Inadequate Sensor Contact: The watch relies on sensors to track your training progress, such as pulse and step sensors. Ensure that the sensors are in direct contact with your skin and positioned correctly for accurate readings. 4. Low Battery: A low battery level can affect the performance of the watch, including the tracking accuracy. Replace the battery if necessary. 5. Interference or Environmental Factors: External factors such as electromagnetic interference or extreme weather conditions may interfere with the tracking accuracy. Try using the watch in different locations or conditions to see if the issue persists. If the problem persists, consider contacting customer support for further assistance in troubleshooting the tracking issues on your Crane AU4-PF-7GA sport watch.
To use the stopwatch mode on the Crane AU4-PF-7GA sport watch, follow these steps: 1. Press the "MODE" key until you access the stopwatch mode, displayed as "STW". 2. To start the stopwatch, press the "START/STOP" key. The stopwatch will begin counting the elapsed time. 3. To pause the stopwatch, press the "START/STOP" key again. The stopwatch will stop counting, and the elapsed time will be displayed. 4. To resume the stopwatch after pausing, press the "START/STOP" key again. 5. To record a lap time while the stopwatch is running, press the "LAP/RESET" key. The stopwatch will continue running, and the lap time will be displayed. 6. To reset the stopwatch to zero, press and hold the "LAP/RESET" key for approximately 3 seconds. The stopwatch will reset, and the display will show "00:00:00". 7. To exit the stopwatch mode, press the "MODE" key. By following these steps, you can effectively use the stopwatch mode on your Crane AU4-PF-7GA sport watch to track elapsed time and record lap times during your activities.
If the stopwatch on your Crane AU4-PF-7GA sport watch is not starting or stopping properly, there are a few possible reasons: 1. Low Battery: Check the battery level of your watch. A low battery can affect the performance of the stopwatch. Replace the battery if necessary. 2. Button Malfunction: Ensure that the buttons on your watch are functioning properly. If a button is stuck or not responding, it may prevent the stopwatch from starting or stopping correctly. Clean or repair the button if needed. 3. Incorrect Button Sequence: Make sure you are pressing the correct buttons in the proper sequence to start or stop the stopwatch. Refer to the user manual or follow the instructions provided for the specific button sequence. 4. Software Issue: If the watch's software is not functioning correctly, it may affect the stopwatch's performance. Try resetting the watch to its factory settings or updating the software if available. 5. Environmental Interference: External factors such as electromagnetic interference or extreme temperatures may affect the performance of the stopwatch. Try using the watch in a different location or under different conditions to see if the issue persists. If the problem continues, consider contacting customer support for further assistance in troubleshooting the stopwatch issues on your Crane AU4-PF-7GA sport watch.
To set the alarms on the Crane AU4-PF-7GA sport watch, follow these steps: 1. Press the "MODE" key until you access the alarm mode, displayed as "ALARM". 2. The first alarm time will be displayed. Press the "SELECT" key to choose the desired alarm to set. 3. The hour digits will flash. Use the "ST./STP." or "SELECT" key to adjust the hour to the desired alarm time. Confirm your selection by pressing the "MODE" key. 4. The minute digits will flash. Use the "ST./STP." or "SELECT" key to adjust the minutes to the desired alarm time. Confirm your selection by pressing the "MODE" key. 5. Repeat steps 2 to 4 to set additional alarms if desired. 6. To activate or deactivate an alarm, press the "ST./STP." or "SELECT" key when the alarm time is displayed. The alarm icon will appear or disappear accordingly. 7. To exit the alarm mode, press the "MODE" key. By following these steps, you can easily set and manage the alarms on your Crane AU4-PF-7GA sport watch.
If the alarms on your Crane AU4-PF-7GA sport watch are not sounding, there are a few possible reasons: 1. Alarm Setting: Check if the alarms are properly set and activated. Ensure that the alarm times are correctly set and that the alarm icon is displayed on the watch face. 2. Sound Volume: Verify that the sound volume of the watch is not muted or set too low. Adjust the volume settings to an audible level. 3. Silent Mode: Make sure that the watch is not in silent mode. Some watches have a silent mode feature that disables the alarm sound. Disable silent mode if necessary. 4. Battery Level: Check the battery level of your watch. A low battery can affect the performance of the alarms. Replace the battery if needed. 5. Alarm Sound Selection: Confirm that the alarm sound is selected and not set to silent or vibration mode. Adjust the alarm sound settings if required. 6. Environmental Interference: External factors such as electromagnetic interference or extreme temperatures may affect the alarm sound. Try using the watch in a different location or under different conditions to see if the issue persists. If the problem continues, consider contacting customer support for further assistance in troubleshooting the alarm sound issues on your Crane AU4-PF-7GA sport watch.
To access the pulse mode on the Crane AU4-PF-7GA sport watch, follow these steps: 1. Press the "MODE" key until you access the training mode, displayed as "WORK". 2. Use the "SELECT" key to cycle through the different training data displays until you reach the pulse mode. The pulse mode will display your pulse measurement. 3. To initiate the pulse measurement, press and hold the sensor surface on the back cover of the watch for approximately 5-8 seconds. Ensure that the back cover is in contact with your wrist. 4. The pulse measurement will be displayed on the screen for approximately 5 seconds before returning to the previous display. 5. To take advantage of the pulse alarm function, ensure that the pulse alarm is activated. This can be done by setting the training zones (see section 4.4.1 "Setting of Training Zones" in the manual). By following these steps, you can easily access the pulse mode and measure your pulse on your Crane AU4-PF-7GA sport watch.
If the pulse measurement on your Crane AU4-PF-7GA sport watch is not accurate, there are a few possible reasons: 1. Incorrect Wearing Position: Ensure that you are wearing the watch correctly and securely on your wrist. The back cover with the pulse sensor should be in direct contact with your skin. Adjust the position if necessary. 2. Weak Pulse Signal: Make sure that the pulse sensor area on the back cover is clean and free from any dirt or sweat. A weak pulse signal can affect the accuracy of the measurement. Clean the sensor area and ensure it is dry before taking a measurement. 3. Movement Interference: Excessive movement or shaking of the watch during the pulse measurement can lead to inaccurate readings. Keep your wrist steady and avoid unnecessary movement while taking the measurement. 4. Low Battery: Check the battery level of your watch. A low battery can affect the performance of the pulse measurement. Replace the battery if needed. 5. Individual Variations: Keep in mind that pulse measurements can vary depending on individual factors such as fitness level, body composition, and skin condition. It is normal to see slight variations in pulse readings. If the problem persists, consider contacting customer support for further assistance in troubleshooting the accuracy issues with the pulse measurement on your Crane AU4-PF-7GA sport watch.
Yes, the manual of the Crane AU4-PF-7GA is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Crane and is the answer not in the manual?
Question and answer
Number of questions: 0