Craftbot Plus manual

Craftbot Plus
7.5 · 1
PDF manual
 · 2 pages
English
manualCraftbot Plus

QUICK START GUIDE

Thank you for purchasing a CraftUnique product and welcome to the world of 3D crafting!
You are just a few steps away from having your rst 3D object printed by your brand new CraftBot.

I. UNPACKING

Step #1
You’ve already found the Quick Start Guide. Excellent! Now remove the large sheet resting under the foam.
Under the sheet you will nd your CraftBot attachable accessories in a cardboard cradle resting in the cavity
of the CraftBot 3D printer.
Step #2
Remove this cradle from the box with care and place it in a safe out-of-the-way place.
Step #3
The printer is wrapped in a tight tting plastic protective cover. Open up the covering.
Firmly grasp the frame of the CraftBot and lift it out of the box without touching the fragile inner parts.
CraftBot weights 14 kg (almost 31 lbs) – seek assistance if needed!
Step #4
Place the printer on a stable and level surface with sucient space around.

II. ACCESSORY CHECK

It’s time to unpack additional parts.
Below you can see the contents of the
box. First of all, check the list to make
sure nothing is missing!
1. Filament guide tube holder
2. Filament guide tube
3. Filament spool holder
4. Filament spool
5. Hex wrenches (5x)
6. USB Flash storage
7. USB A-B cable and AC power cable
8. Filament monitoring system (FMS)*
1
4
7
2
5
8
3
6
1 2 3 4
PLUG&PLAY 3D PRINTERWITH 5 YEARS WARRANTY
WWW.CRAFTBOT.COM WWW.CRAFTBOTUSA.COM

Manual

View the manual for the Craftbot Plus here, for free. This manual comes under the category 3D printers and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Craftbot Plus or do you need help? Ask your question here

Need help?

Do you have a question about the Craftbot Plus and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Craftbot Plus owners to provide you with a good answer.

Number of questions: 0

Craftbot Plus specifications

Below you will find the product specifications and the manual specifications of the Craftbot Plus.

General
Brand Craftbot
Model Plus
Product 3D printer
Language English
Filetype Usermanual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Craftbot Plus below.

Is your question not listed? Ask your question here

No results