View the manual for the Contec C-1200 here, for free. This manual comes under the category bicycle computers and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Contec C-1200 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Contec C-1200.
The Contec C-1200 is a bicycle computer designed for cyclists who want to track their riding performance and monitor their progress. This bike computer offers a range of features to enhance the cycling experience. One of the main features of the Contec C-1200 is its ability to accurately measure and display various metrics such as speed, distance, time, and cadence. This allows cyclists to keep track of their progress and set goals for their rides. The easy-to-read display ensures that the information is visible even in bright sunlight or low light conditions. The Contec C-1200 is also equipped with a wireless transmission system, which eliminates the hassle of tangled wires and provides a clean and streamlined look. The wireless feature also allows for easy installation and removal, making it convenient for riders who need to transfer the computer between different bikes. Additionally, this bicycle computer includes a built-in temperature sensor that displays the current temperature during the ride. This can be helpful for cyclists who want to prepare and dress appropriately for the weather conditions. The Contec C-1200 is designed to be durable and reliable, with a sturdy construction that can withstand the rigors of cycling. It is also easy to operate and navigate through its user-friendly interface, making it suitable for cyclists of all levels of experience. Overall, the Contec C-1200 is a practical and functional bicycle computer that provides cyclists with essential metrics and information to enhance their riding experience.
| Brand | Contec |
| Model | C-1200 |
| Product | bicycle computer |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Contec C-1200 below.
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
GPS is a system that can be used all over the globe to determine your location by means of satellites.
The abbreviation GPS stands for 'Global Positioning System'.
No, no internet is required to receive GPS.
To reset the functions of the Contec C-1200 bicycle computer, follow these steps: 1. Press the MODE button until the desired function appears on the display. 2. Press and hold the RESET button for more than 4 seconds. 3. The display will start flashing, indicating that the function is being reset. 4. After 2.5 seconds, the displayed function will be reset to zero. By following these steps, you can easily reset the functions of your Contec C-1200 bicycle computer.
The reset function may not be working on your Contec C-1200 bicycle computer due to the following reasons: 1. Insufficient duration: Make sure you are pressing and holding the RESET button for more than 4 seconds. If the button is not held long enough, the reset function may not activate. 2. Button malfunction: Check if the RESET button is functioning properly. Ensure that it is not stuck or damaged, as this can prevent the reset function from working. 3. Low battery: If the battery level is low, it may affect the functionality of the bicycle computer, including the reset function. Replace the battery with a fresh one and try again. 4. Firmware issue: In rare cases, a firmware issue may cause the reset function to malfunction. Check for any available firmware updates for your Contec C-1200 bicycle computer and install them according to the manufacturer's instructions. If the issue persists after trying these steps, it is recommended to contact Contec customer support for further assistance.
To navigate to the function reset option on the Contec C-1200 bicycle computer, follow these steps: 1. Press the MODE button on the bicycle computer until the desired function appears on the display. The function options may include TAGES-KM (trip distance), FAHRZEIT (ride time), DURCHKMH (average speed), and MAX-KMH (maximum speed). 2. Once the desired function is displayed, press and hold the RESET button for more than 4 seconds. This will activate the reset function for that specific function. 3. The display will start flashing, indicating that the function is being reset. After approximately 2.5 seconds, the displayed function will be reset to zero. By following these steps, you can easily navigate to the function reset option on your Contec C-1200 bicycle computer and reset the desired function to zero.
If the functions on your Contec C-1200 bicycle computer are not resetting to zero, there could be several reasons for this issue: 1. Incorrect button sequence: Ensure that you are following the correct button sequence to reset the functions. Press and hold the RESET button for more than 4 seconds while the desired function is displayed. 2. Insufficient duration: Make sure you are holding the RESET button for the required duration. If the button is not held long enough, the reset function may not activate. 3. Function not selected: Check if you have selected the correct function before attempting to reset it. Use the MODE button to navigate through the available functions and select the one you want to reset. 4. Button malfunction: Verify if the RESET button is functioning properly. Ensure that it is not stuck or damaged, as this can prevent the reset function from working. If the issue persists after checking these factors, it is recommended to contact Contec customer support for further assistance.
To troubleshoot the issue of the functions not resetting on your Contec C-1200 bicycle computer, you can follow these steps: 1. Ensure that you are pressing and holding the RESET button for more than 4 seconds. If the button is not held long enough, the reset function may not activate. 2. Check if the RESET button is functioning properly. Make sure it is not stuck or damaged, as this can prevent the reset function from working. Clean the button if necessary. 3. Verify that you have selected the correct function before attempting to reset it. Use the MODE button to navigate through the available functions and select the one you want to reset. 4. Check the battery level of your bicycle computer. If the battery is low, it may affect the functionality of the device, including the reset function. Replace the battery if necessary. 5. If none of the above steps resolve the issue, it is recommended to contact Contec customer support for further assistance. By following these troubleshooting steps, you can identify and resolve the issue of the functions not resetting on your Contec C-1200 bicycle computer.
To set and program the functions of the Contec C-1200 bicycle computer, follow these steps: 1. Press the MODE button on the bicycle computer to navigate through the available functions. The functions may include trip distance, ride time, average speed, maximum speed, temperature, and more. 2. Once you have selected the desired function, press the SET button to enter the programming mode for that function. 3. Use the MODE button to adjust the values or settings for the selected function. Press the SET button to confirm each adjustment. 4. Repeat steps 2 and 3 for each function you want to set or program. 5. To exit the programming mode, press and hold the MODE button for a few seconds until the display returns to the normal mode. By following these steps, you can easily set and program the functions of your Contec C-1200 bicycle computer according to your preferences.
If the functions are not saving after you set them on your Contec C-1200 bicycle computer, there could be a few reasons for this issue: 1. Incorrect confirmation: Make sure you are pressing the SET button after adjusting the values or settings for each function. The SET button is used to confirm and save the changes. 2. Insufficient duration: Ensure that you are holding the SET button for a sufficient amount of time to allow the changes to be saved. Sometimes, a quick press may not register the confirmation. 3. Low battery: Check the battery level of your bicycle computer. If the battery is low, it may not have enough power to save the settings. Replace the battery if necessary. 4. Firmware issue: In rare cases, a firmware issue may prevent the functions from saving properly. Check for any available firmware updates for your Contec C-1200 bicycle computer and install them according to the manufacturer's instructions. If the issue persists after checking these factors, it is recommended to contact Contec customer support for further assistance.
To troubleshoot the issue of the functions not being programmed correctly on your Contec C-1200 bicycle computer, you can follow these steps: 1. Ensure that you are following the correct programming procedure as outlined in the manual. Refer to the specific instructions for the Contec C-1200 model. 2. Double-check that you are selecting the correct function to program. Use the MODE button to navigate through the available functions and choose the one you want to adjust. 3. Make sure you are pressing the SET button after making any changes to the values or settings of the function. The SET button is used to confirm and save the programming. 4. Verify that you are holding the SET button for a sufficient amount of time to allow the changes to be saved. Sometimes, a quick press may not register the confirmation. 5. Check the battery level of your bicycle computer. If the battery is low, it may affect the programming functionality. Replace the battery if necessary. If the issue persists after trying these troubleshooting steps, it is recommended to contact Contec customer support for further assistance.
To program the functions on the Contec C-1200 bicycle computer, follow these steps: 1. Press the MODE button to navigate through the available functions displayed on the screen. Functions may include trip distance, ride time, average speed, maximum speed, temperature, and more. 2. Once you have selected the desired function, press the SET button to enter the programming mode for that function. 3. Use the MODE button to adjust the values or settings for the selected function. Press the SET button to confirm each adjustment. 4. Repeat steps 2 and 3 for each function you want to program. 5. To exit the programming mode, press and hold the MODE button for a few seconds until the display returns to the normal mode. By following these steps, you can easily program the functions on your Contec C-1200 bicycle computer according to your preferences.
To navigate to the function settings menu on the Contec C-1200 bicycle computer, follow these steps: 1. Press and hold the SET button for approximately 3 seconds until the desired function appears on the display. The SET button may have an OPEN symbol next to it. 2. Use the MODE button to scroll through the available functions until you reach the desired setting. The MODE button allows you to navigate up or down the menu options. 3. Once you have selected the desired function, press the SET button again to enter the function settings menu. 4. Use the MODE button to adjust the values or settings within the function settings menu. Press the SET button to confirm each adjustment. 5. To exit the function settings menu, press and hold the MODE button for a few seconds until the display returns to the normal mode. By following these steps, you can easily navigate to the function settings menu on your Contec C-1200 bicycle computer and make adjustments to the desired functions.
The trip distance on the Contec C-1200 bicycle computer is measured and displayed as follows: 1. The bicycle computer uses a sensor to track the rotations of the wheel. 2. The sensor sends signals to the computer, which calculates the distance based on the wheel circumference. 3. The calculated distance is then displayed on the screen of the bicycle computer. 4. The trip distance is typically shown in kilometers (KM) or miles (MI), depending on the unit of measurement selected. 5. The trip distance is continuously updated as you ride, providing real-time information about the distance covered. By accurately measuring the rotations of the wheel, the Contec C-1200 bicycle computer can provide an accurate and reliable measurement of the trip distance during your rides.
If the trip distance is not being displayed accurately on your Contec C-1200 bicycle computer, there could be a few reasons for this issue: 1. Incorrect wheel circumference setting: Ensure that you have correctly entered the wheel circumference value in the bicycle computer. If the value is not accurate, it can lead to inaccurate distance calculations. Measure the circumference of your wheel and adjust the setting accordingly. 2. Sensor misalignment: Check if the sensor and magnet are properly aligned. The sensor should be positioned close to the magnet on the wheel spoke. If they are misaligned, the sensor may not detect the rotations accurately, resulting in incorrect distance measurements. 3. Sensor or magnet damage: Inspect the sensor and magnet for any damage or debris that may be affecting their functionality. Clean or replace them if necessary. 4. Low battery: Check the battery level of your bicycle computer. If the battery is low, it may affect the accuracy of the distance measurement. Replace the battery if needed. By addressing these factors, you can troubleshoot the issue of the trip distance not being displayed accurately on your Contec C-1200 bicycle computer.
The trip distance on the Contec C-1200 bicycle computer is measured and displayed based on the rotations of the wheel. However, without access to the specific information in the manual, I cannot provide the exact troubleshooting steps for the issue of the trip distance not being recorded correctly. To troubleshoot this issue, you can try the following general steps: 1. Check the sensor and magnet alignment: Ensure that the sensor and magnet are properly aligned and positioned. They should be close enough to detect each rotation of the wheel accurately. 2. Verify the wheel circumference setting: Make sure the wheel circumference setting in the bicycle computer matches the actual circumference of your bike's wheel. Adjust the setting if necessary. 3. Clean the sensor and magnet: Remove any dirt, debris, or corrosion from the sensor and magnet. A clean and clear connection between them can improve accuracy. 4. Check the battery level: Ensure that the battery in the bicycle computer is not low. A low battery can affect the accuracy of the recorded distance. Replace the battery if needed. If the issue persists after trying these steps, it is recommended to consult the Contec customer support or refer to the manual for specific troubleshooting instructions.
Several factors can affect the accuracy of the trip distance measurement on the Contec C-1200 bicycle computer: 1. Wheel circumference setting: Incorrectly setting the wheel circumference can lead to inaccurate distance calculations. Ensure that the wheel circumference is accurately entered into the bicycle computer. 2. Sensor alignment: Improper alignment between the sensor and magnet can result in missed or inconsistent rotations, leading to inaccurate distance measurements. Make sure the sensor and magnet are properly aligned and positioned. 3. Wheel slippage: If the wheel slips or loses traction during the ride, it can affect the accuracy of the distance measurement. Ensure that the wheel is securely attached and properly inflated. 4. Terrain and road conditions: Riding on uneven terrain or rough roads can cause variations in wheel rotations, resulting in inaccurate distance measurements. Be aware that the accuracy may be affected in such conditions. 5. Battery level: A low battery can impact the functionality of the bicycle computer, including the accuracy of distance measurements. Check the battery level and replace it if necessary. By considering these factors and taking appropriate measures, you can improve the accuracy of the trip distance measurement on your Contec C-1200 bicycle computer.
To reset the trip distance to zero on the Contec C-1200 bicycle computer, follow these steps: 1. Press and hold the RESET button on the bicycle computer for more than 4 seconds. The RESET button may have an icon or label indicating its function. 2. After holding the RESET button, the trip distance display will reset to zero. By following these steps, you can easily reset the trip distance to zero on your Contec C-1200 bicycle computer.
The ride time on the Contec C-1200 bicycle computer is measured and displayed as follows: 1. When you start riding, the bicycle computer automatically starts tracking the time. 2. The ride time is displayed on the screen of the bicycle computer in hours, minutes, and seconds format (HH:MM:SS). 3. The ride time continues to increment as long as the bicycle computer is powered on and you are riding. 4. The ride time is paused when you stop riding or when the bicycle computer is turned off. 5. To reset the ride time to zero, you can press and hold the RESET button on the bicycle computer for more than 4 seconds. The ride time will then be reset to zero. By accurately tracking the time from the moment you start riding, the Contec C-1200 bicycle computer provides you with real-time information about the duration of your ride.
If the ride time is not being displayed correctly on your Contec C-1200 bicycle computer, there could be a few reasons for this issue: 1. Incorrect time settings: Ensure that the time settings on the bicycle computer are accurate. Check the time format (12-hour or 24-hour) and adjust it if necessary. 2. Sensor or magnet misalignment: Verify that the sensor and magnet are properly aligned and positioned. If they are misaligned, the bicycle computer may not accurately detect the rotations and calculate the ride time. 3. Low battery: Check the battery level of your bicycle computer. A low battery can affect the functionality of the device, including the accuracy of the ride time measurement. Replace the battery if needed. 4. Firmware issue: In rare cases, a firmware issue may cause inaccuracies in the ride time display. Check for any available firmware updates for your Contec C-1200 bicycle computer and install them according to the manufacturer's instructions. If the issue persists after checking these factors, it is recommended to contact Contec customer support for further assistance.
To troubleshoot the issue of the ride time not being recorded accurately on your Contec C-1200 bicycle computer, you can follow these steps: 1. Check the sensor and magnet alignment: Ensure that the sensor and magnet are properly aligned and positioned. They should be close enough to detect each rotation of the wheel accurately. Adjust their positions if necessary. 2. Verify the wheel circumference setting: Make sure the wheel circumference setting in the bicycle computer matches the actual circumference of your bike's wheel. Measure the wheel circumference accurately and adjust the setting accordingly. 3. Clean the sensor and magnet: Remove any dirt, debris, or corrosion from the sensor and magnet. A clean and clear connection between them can improve accuracy. 4. Check the battery level: Ensure that the battery in the bicycle computer is not low. A low battery can affect the accuracy of the recorded ride time. Replace the battery if needed. 5. Firmware update: Check for any available firmware updates for your Contec C-1200 bicycle computer. Updating the firmware can address any software-related issues that may affect the accuracy of the ride time recording. By following these troubleshooting steps, you can identify and resolve the issue of the ride time not being recorded accurately on your Contec C-1200 bicycle computer.
Several factors can affect the accuracy of the ride time measurement on the Contec C-1200 bicycle computer: 1. Sensor alignment: Improper alignment between the sensor and magnet can result in missed or inconsistent rotations, leading to inaccurate ride time measurements. Ensure that the sensor and magnet are properly aligned and positioned. 2. Wheel slippage: If the wheel slips or loses traction during the ride, it can affect the accuracy of the ride time measurement. Ensure that the wheel is securely attached and properly inflated. 3. Battery level: A low battery can impact the functionality of the bicycle computer, including the accuracy of the ride time measurement. Check the battery level and replace it if needed. 4. Firmware issue: In rare cases, a firmware issue may cause inaccuracies in the ride time measurement. Check for any available firmware updates for your Contec C-1200 bicycle computer and install them according to the manufacturer's instructions. By considering these factors and taking appropriate measures, you can improve the accuracy of the ride time measurement on your Contec C-1200 bicycle computer.
To reset the ride time to zero on the Contec C-1200 bicycle computer, follow these steps: 1. Press and hold the RESET button on the bicycle computer for more than 4 seconds. The RESET button may have an icon or label indicating its function. 2. After holding the RESET button, the ride time display will reset to zero. By following these steps, you can easily reset the ride time to zero on your Contec C-1200 bicycle computer.
The average speed on the Contec C-1200 bicycle computer is calculated and displayed as follows: 1. The bicycle computer measures the time taken for a specific distance traveled, typically in kilometers (KM) or miles (MI). 2. The computer then divides the distance by the time to calculate the average speed. 3. The average speed is displayed on the screen of the bicycle computer in units of distance per unit of time, such as kilometers per hour (KM/H) or miles per hour (MPH). 4. The average speed is continuously updated as you ride, providing real-time information about your average speed during the ride. By calculating the distance traveled and the time taken, the Contec C-1200 bicycle computer can provide an accurate and up-to-date measurement of your average speed during your rides.
If the average speed is not being displayed correctly on your Contec C-1200 bicycle computer, there could be a few reasons for this issue: 1. Incorrect wheel circumference setting: Ensure that you have correctly entered the wheel circumference value in the bicycle computer. If the value is not accurate, it can lead to incorrect speed calculations. Measure the circumference of your wheel and adjust the setting accordingly. 2. Sensor or magnet misalignment: Verify if the sensor and magnet are properly aligned. The sensor should be positioned close to the magnet on the wheel spoke. If they are misaligned, the sensor may not detect the rotations accurately, resulting in incorrect speed measurements. 3. Wheel slippage: If the wheel slips or loses traction during the ride, it can affect the accuracy of the speed measurement. Ensure that the wheel is securely attached and properly inflated. 4. Low battery: Check the battery level of your bicycle computer. If the battery is low, it may affect the accuracy of the displayed speed. Replace the battery if necessary. By addressing these factors, you can troubleshoot the issue of the average speed not being displayed correctly on your Contec C-1200 bicycle computer.
To troubleshoot the issue of the average speed not being calculated accurately on your Contec C-1200 bicycle computer, you can follow these steps: 1. Verify the wheel circumference setting: Ensure that the wheel circumference setting in the bicycle computer matches the actual circumference of your bike's wheel. Measure the wheel circumference accurately and adjust the setting accordingly. 2. Check the sensor and magnet alignment: Make sure the sensor and magnet are properly aligned and positioned. They should be close enough to detect each rotation of the wheel accurately. Adjust their positions if necessary. 3. Clean the sensor and magnet: Remove any dirt, debris, or corrosion from the sensor and magnet. A clean and clear connection between them can improve accuracy. 4. Check the battery level: Ensure that the battery in the bicycle computer is not low. A low battery can affect the accuracy of the calculated average speed. Replace the battery if needed. By following these troubleshooting steps, you can identify and resolve the issue of the average speed not being calculated accurately on your Contec C-1200 bicycle computer.
Several factors can affect the accuracy of the average speed calculation on the Contec C-1200 bicycle computer: 1. Wheel circumference setting: Incorrectly setting the wheel circumference can lead to inaccurate speed calculations. Ensure that the wheel circumference is accurately entered into the bicycle computer. 2. Sensor or magnet misalignment: Improper alignment between the sensor and magnet can result in missed or inconsistent rotations, leading to inaccurate speed measurements. Make sure the sensor and magnet are properly aligned and positioned. 3. Wheel slippage: If the wheel slips or loses traction during the ride, it can affect the accuracy of the speed measurement. Ensure that the wheel is securely attached and properly inflated. 4. Terrain and road conditions: Riding on uneven terrain or rough roads can cause variations in wheel rotations, resulting in inaccurate speed calculations. Be aware that the accuracy may be affected in such conditions. 5. Battery level: A low battery can impact the functionality of the bicycle computer, including the accuracy of the average speed calculation. Check the battery level and replace it if necessary. By considering these factors and taking appropriate measures, you can improve the accuracy of the average speed calculation on your Contec C-1200 bicycle computer.
To reset the average speed to zero on the Contec C-1200 bicycle computer, follow these steps: 1. Press and hold the RESET button on the bicycle computer for more than 4 seconds. The RESET button may have an icon or label indicating its function. 2. After holding the RESET button, the average speed display will reset to zero. By following these steps, you can easily reset the average speed to zero on your Contec C-1200 bicycle computer.
Yes, the manual of the Contec C-1200 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Contec and is the answer not in the manual?
Question and answer
Number of questions: 0