Conceptronic CIPCAMPTIWL manual

Conceptronic CIPCAMPTIWL
8.9 · 4
PDF manual
 · 12 pages
manualConceptronic CIPCAMPTIWL
5.3 Video Recording Trigger
1 The application can perform 3 types of video recording , the alarm video recording
(set in Figure 4), scheduled recording (set in Figure 5) and manual recording (by
clicking on the record button in Figure 10). The manual recording has top priority,
scheduled recording takes second, then alarm recording. Example:
If a manual recording is initialed by the time an alarm is activated, the application
will stop the alarm recording first then start the manual recording.
When performing a scheduled video recording, an alarm is activated, the
application will not response to the alarm recording request.
2 Prefix of A, M and S will be set to the file name according to alarm recording, manual
recording and scheduled recording, time stamp will fill up the other part and ends up
with .avi (H series products suffix is.asf)
3 Whenever the recording time is longer than one hour for manual recording or
scheduled recording, a new file will be created for each hour.

5.4 Stop the Video

A video can be stopped by the following two methods:
1 Select a started device and click the
button can stop it's video. All devices can
be stopped by clicking on the down arrow and select “stop all video” from the drop list.
2 Right click on a channel and select stop video from the pop-up menu to stop it.

6 Device Control

Select a video channel from the display area directly, and you can control the device of
this channel.

6.1 Base Operation

1 Double click on a channel will stretch the video to full screen. By double clicking it
again, the video will shrink back to its original size.
2 Click and hold a channel can drag and drop it to another channel, in case the target
channel is utilized, the two video channels will swap.
3 By right clicking on a channel, user can perform some operations like stop video,
stretch, etc from the pop-up menu.
4 By clicking on the icons in the status bar for each channel, you can snapshot or
record manually. Due to different functions, every series product has its own icon
content. Status bar of B Series is as Figure 10, it displays the frame rate is 20.5, click
these icons, talkback, sound intercepting, snapshot and manual video recording can

View the manual for the Conceptronic CIPCAMPTIWL here, for free. This manual comes under the category Security cameras and has been rated by 4 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Conceptronic CIPCAMPTIWL or do you need help? Ask your question here

Need help?

Do you have a question about the Conceptronic and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Conceptronic owners to provide you with a good answer.

Number of questions: 0

Security camera
User manual (PDF)
Maximum resolution1280 x 720 pixels
Supported video modes360p, 720p
Frame rate30 fps
Supported graphics resolutions320 x 180,640 x 360,1280 x 720 (HD 720)
Video compression formatsH.264
Minimum illumination- lx
Field of view (FOV) angle60 °
Pan range0 - 355 °
Tilt angle range0 - 120 °
Image sensor
Sensor typeCMOS
Optical sensor size1/4 "
Number of sensors1
Security algorithmsWPA, WPA2
Built-in HDD
Card reader integrated
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size128 GB
Night vision
Night vision
LED typeIR
Number of illumination LEDs4
Night vision distance5 m
TypeIP security camera
PTZ control
Placement supportedIndoor
Connectivity technologyWireless
Day/night mode
Alarm input/output
Operating frequency2400 MHz
Infrared (IR) cut-off filter
Form factorDome
Product colourBlack
LED indicators
Country of originChina
Mounting typeCeiling/wall
Ethernet LAN-
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-Fi data rate (max)150 Mbit/s
Supported network protocolsDHCP, DDNS, UPnP, NTP, FTP, SMTP, TCP/IP, UDP/IP, UTP, HTTP
System requirements
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Mac compatibility
Weight & dimensions
Width79.56 mm
Height110.8 mm
Package typeBox
Length79.56 mm
Weight207 g
Package weight433 g
Depth79.56 mm
Package depth105 mm
Package height160 mm
Package width137 mm
Power over Ethernet (PoE)
Power consumption (typical)6 W
Power source typeDC
DC output voltage5
Audio system2-way
Audio formats supportedAAC
Packaging content
Mounting brackets included
Quick installation guide
AC adapter included
Number of cameras1
Resource CD
Lens system
Maximum aperture number2
Fixed focal length3.6 mm
Management features
Web-based management
Remotely operated
Technical details
Audio input1
Operational conditions
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)3 - 90 %
Storage temperature (T-T)-40 - 70 °C
Ports & interfaces
DC-in jack
Logistics data
Harmonized System (HS) code85258900
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Conceptronic CIPCAMPTIWL below.

Is your question not listed? Ask your question here

No results