Conceptronic CIPCAMPTIWL manual

Conceptronic CIPCAMPTIWL
8.9 · 4
PDF manual
 · 12 pages
English
manualConceptronic CIPCAMPTIWL

5.1 Start the Video

Video can be start by the following three methods:
Select and double click on a device needed to be started; a free channel will be taken
to show up the video.
Select a device and click the
button will start it as well. By clicking on the
down arrow, start all the devices command can be found on the drop list.
Select a device, drag and drop it to a channel, it will show up the video in this
channel.
Device name will be shown in green on the status bar when it's started.
In case the device is offline, or IP address, port, viewing username or password is wrong,
the connection could not be established, and related information will be pop-up.

5.2 Alarm Trigger

1 After started a video, the application will detect the device to determine if there's any
alarm occurred.
2 Whenever an alarm is detected, the application will check the armed time, once the
alarm is within an armed time, alarm action will be taken.
3 When a
icon twinkling on the device field, means an alarm action is being taken,
click on the
icon can stop the siren.
4 When a
appears but not twinkling, means there was an alarm, double click on
the
icon will pop-up a recent alarm list. The icon will disappear by closing
the alarm list. The alarm list window is as Figure 9.
Figure 9: Alarm List window
5 Even the video alarm recording trigger is set, it will not take any effect in case it is
taking a scheduled recording job or capturing a video manually by the time an alarm
activated.
6 In case snapshot trigger is set, the file name will be started with an A prefix following
by the time stamp as the other part, the suffix is .JPG.
7 Please refer to chapter 8.1 for the option of alarm action.

View the manual for the Conceptronic CIPCAMPTIWL here, for free. This manual comes under the category Security cameras and has been rated by 4 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Conceptronic CIPCAMPTIWL or do you need help? Ask your question here

Need help?

Do you have a question about the Conceptronic and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Conceptronic owners to provide you with a good answer.

Number of questions: 0

General
Conceptronic
CIPCAMPTIWL | CIPCAMPTIWL
Security camera
8714909025980
English
User manual (PDF)
Video
Maximum resolution1280 x 720 pixels
Supported video modes360p, 720p
Frame rate30 fps
Supported graphics resolutions320 x 180,640 x 360,1280 x 720 (HD 720)
Video compression formatsH.264
Camera
Minimum illumination- lx
Field of view (FOV) angle60 °
Pan range0 - 355 °
Tilt angle range0 - 120 °
Image sensor
Sensor typeCMOS
Optical sensor size1/4 "
Number of sensors1
Security
Security algorithmsWPA, WPA2
Storage
Built-in HDD
Card reader integrated
Compatible memory cardsMicroSD (TransFlash)
Maximum memory card size128 GB
Night vision
Night vision
LED typeIR
Number of illumination LEDs4
Night vision distance5 m
Performance
TypeIP security camera
PTZ control
Placement supportedIndoor
Connectivity technologyWireless
Day/night mode
Alarm input/output
Operating frequency2400 MHz
Infrared (IR) cut-off filter
Design
Form factorDome
Product colourBlack
LED indicators
Country of originChina
Mounting typeCeiling/wall
Network
Ethernet LAN-
Wi-Fi
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Wi-Fi data rate (max)150 Mbit/s
Supported network protocolsDHCP, DDNS, UPnP, NTP, FTP, SMTP, TCP/IP, UDP/IP, UTP, HTTP
Bluetooth
System requirements
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows XP Home, Windows XP Home x64, Windows XP Professional, Windows XP Professional x64
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.6 Snow Leopard, Mac OS X 10.7 Lion, Mac OS X 10.8 Mountain Lion, Mac OS X 10.9 Mavericks
Mac compatibility
Weight & dimensions
Width79.56 mm
Height110.8 mm
Package typeBox
Length79.56 mm
Weight207 g
Package weight433 g
Depth79.56 mm
Package depth105 mm
Package height160 mm
Package width137 mm
Power
Power over Ethernet (PoE)
Power consumption (typical)6 W
Power source typeDC
DC output voltage5
Audio
Audio system2-way
Audio formats supportedAAC
Packaging content
Mounting brackets included
Quick installation guide
AC adapter included
Number of cameras1
Resource CD
Lens system
Maximum aperture number2
Fixed focal length3.6 mm
Management features
Web-based management
Remotely operated
Technical details
Audio input1
Operational conditions
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)3 - 90 %
Storage temperature (T-T)-40 - 70 °C
Ports & interfaces
DC-in jack
InterfaceWLAN
Logistics data
Harmonized System (HS) code85258900
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Conceptronic CIPCAMPTIWL below.

Is your question not listed? Ask your question here

No results