Name: Conair DPSBAR
Brand: Conair
SKU: 296946
Rating: 75 (1 reviews)

Vertical Slide Bar

Showerhead Set

Features Vertical Slide Bar Showerhead Set with 16 Spray Combinations, Diverter Valve, All-Directional Ball Joint on Wall-Mount ShowerheadPackage Includes Wall-Mount and Hand-Held Showerheads, Vertical Slide Bar with Adjustable Hand-held Holder, and Teflon TapeCleaning and Maintenance Clean with gentle nonabrasive cleanser and soft clothSave water and energy2.5 gallons per minuteEach showerhead when used individually, complies with ANSI A112.18.1WATE R S AVERCustomer Service 1-800-767-6020Website www.conair.comFull Body

Wide cone spray for

maximum coverage.

Mist

Full coverage mist spray

gently hydrates skin.

Heavy Rain

Full spray offers

“pouring rain” sensation.

PLUS

Combination Sprays

Create 16 personal showering

favorites by mixing and

matching Full Body,

Jet Massage, Mist, and

Heavy Rain.

Jet Massage

Oscillating massage

provides temporary relief

to tired, sore muscles.

CombinationSpray Settings:

Wall-Mount

Showerhead

4 settings

Cam-Lock System

secures bar on pipe

Hose with Bracket

5 feet long

Hand-Held Showerhead

4 settings

3-Way Diverter

for three settings:

wall-mount only,

hand-held only,

combination spray

Adjustable

Hand-Held

Holder

for multiple

vertical

positions

MassagesRelaxesCleans & SoothesSPA BENEFITSVERTICAL SLIDE BARSHOWERHEAD SETCOMBINATIONSETTINGS

Easy to Install

Step 1: Remove the old showerhead by turning it

counterclockwise (Fig. 1). Wipe off any debris from

the threaded pipe. Wrap the supplied teflon tape

clockwise around the threaded pipe (Fig. 2).

Step 2: Place the open portion of the cam-lock

onto the shower pipe and rotate the cam-lock

upward to the 12:00 o'clock position to lock

(Fig. 3). Secure the slide bar by pressing the suction

cup firmly to the wall (Fig. 4). Suction cup works

best on a clean tile surface.

Step 3: Install the diverter valve on the showerhead

pipe. Turn clockwise with your hand to tighten.

Note: Do not over-tighten. (Fig. 5). Then, install the

new wall-mount showerhead to the forward-facing

diverter opening by turning it clockwise and tight-

en by hand. If additional tightening is required,

place protective cloth on the swivel nut and tighten

with a wrench (Fig. 6).

Step 4: Attach one end of the hose to the

downward-facing diverter valve opening (Fig. 7).

Attach the other end of the hose to the hand-held

showerhead (Fig. 8) and turn clockwise to tighten

by hand.

Step 5: Rest the hand-held showerhead in the

holder when not in use (Fig 9).

Easy to Operate

Turn the 3-way diverter valve according to the

desired use (Fig. 10): wall-mount showerhead

alone (A), a combination of both showerheads (B),

or hand-held showerhead alone (C).

4-Setting Wall-Mount4-Setting Hand-Held Cam-Lock System Secures Bar On Showerhead PipeUnique Dial With Click & Set™

Setting SelectorChrome FinishCOMBINATION SETTINGS

Model DPSBAR

East Windsor, NJ 08520

Glendale, AZ 85307

Made in China

06PX11004

Vertical Slide Bar

Suction Cup

secures bar

to wall

Fig. 10

Fig. 2

Fig. 5

Fig. 7

Fig. 8

Fig. 9

Fig. 1

Fig. 6

Fig. 3

Fig. 4

Fig. 10

PRODUCTION INKSCyan Magenta Yellow Black5/C job (4/C + PMS 200)Other Instructions:Images print CMYK.RED prints PMS 200.Hi res in place.Bleed edges.Diestrike does not print.PMS 200LimitedWarranty

Year

Includes

Shower Heads1 Fixed1 Hand Held

Need help?

Number of questions: 0

Do you have a question about the Conair DPSBAR or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Conair DPSBAR owners to properly answer your question.

About the Conair DPSBAR

View the manual for the Conair DPSBAR here, for free. This manual comes under the category Shower heads and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Conair DPSBAR or do you need help? Ask your question here