Cocraft PRO Edition C1600-M manual

Cocraft PRO Edition C1600-M
9.2 · 1
PDF manual
 · 60 pages
English
manualCocraft PRO Edition C1600-M
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.

P ROEDITION

Ver. 20170131Original instructionsBruksanvisning i originalOriginal bruksanvisningAlkuperäinen käyttöohjeOriginal Bedienungsanleitung
Art.no Model
40-9929 PSC185GH.1

PRO C1600-M

CIRCULAR SAW 1600 W

40-9929
CIRKELSÅG SIRKELSAG
PYÖRÖSAHA KREISSÄGE

Manual

View the manual for the Cocraft PRO Edition C1600-M here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Cocraft PRO Edition C1600-M or do you need help? Ask your question here

Need help?

Do you have a question about the Cocraft and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Cocraft PRO Edition C1600-M specifications

Below you will find the product specifications and the manual specifications of the Cocraft PRO Edition C1600-M.

General
BrandCocraft
ModelPRO Edition C1600-M
Productsaw
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Cocraft PRO Edition C1600-M below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Cocraft saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

Is the manual of the Cocraft PRO Edition C1600-M available in English?

Yes, the manual of the Cocraft PRO Edition C1600-M is available in English .

Is your question not listed? Ask your question here

No results