View the manual for the Cobra CS620 here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9. This manual is available in the following languages: -. Do you have a question about the Cobra CS620 or do you need help? Ask your question here
Below you will find the product specifications and the manual specifications of the Cobra CS620.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Cobra CS620 below.
1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.
If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.
Unfortunately, we do not have the manual for the Cobra CS620 available in English. This manual is available in -.
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Cobra and is the answer not in the manual?
Question and answer
Number of questions: 0