Name: Clas Ohlson RC123
Brand: Clas Ohlson
SKU: 953141
Rating: 75 (1 reviews)

English

GREAT BRITAIN • customer service

tel: 08545 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk

Ver. 20130624

Radio Controlled Alarm Clock

Art.no 36-5340 Model RC123

Please read theentire instruction manual before using theproduct and save it

for future reference. We reserve theright for any errors in text or images and any

necessary changes made to technical data. If you have any questions regarding

technical problems please contact our Customer Services.

Things to consider:

• Other wireless equipment using thesame frequency can reduce

thetransmission range.

• The range of all wireless equipment depends on thetype of obstacles located

between thetransmitter and thereceiver (e.g. aconcrete wall will interfere with

thesignal more than aplasterboard wall).

If you experience problems, try thefollowing:

• Turn off any other existing wireless equipment and check if this is thecause of

theproblem.

• Reposition thewireless equipment, shorten thedistance between thesending

and receiving devices or reduce thenumber of obstacles (walls, furniture, etc.)

between them.

What is aradio controlled clock?

A radio controlled clock is anextremely accurate timekeeping device. The time is

controlled by theatomic clock in Braunschweig, Germany (accuracy ±1 second per

1 million years). The clock has abuilt -in radio receiver that decodes theincoming

atomic clock signal (long wave 77.5 kHz). The product also has aprecisely

calibrated quartz clock movement with afrequency of 32 kHz that keeps it running.

The transmitter in Germany has anofﬁcial range of 2,000 km. This means that

theUK and Ireland should be well within range.

Safety

• The alarm clock must only be repaired by qualiﬁed service technicians.

• The alarm clock is intended for indoor use only.

• Do not place thealarm clock where there is arisk of it falling into water or

other liquid.

• Do not place thealarm clock in damp or dusty environments or where it could

be subject to strong vibrations.

• Do not expose thealarm clock to extremely high or low temperatures. Do not

expose theproduct to direct sunlight.

• Never try to open, change or modify thealarm clock in any way.

• Always remove thebatteries if thealarm clock is not to be used for along time.

Buttons and functions

3. [ ▲ ] Increases and sets values for

date, time, alarm and activates

backlight

4. [ ▼ ] Decreases and sets values

for date, time, alarm and activates

backlight

5. Battery holder

4. Press [ Alarm on/off ] to turn thealarm on or off.

5. When thealarm sounds, both theset alarm time and alarm icon will ﬂash.

6. Press [ Alarm on/off ] to turn thealarm off.

7. If no button is pushed thealarm will automatically shut off after 2 minutes.

12/24 hour time display

Press [ ▲ ] to select either a12 or 24 hour clock display.

Displaying seconds or day and language selection

Press [ ▼ ] to select whether to display seconds or current day.

Hold in [ ▼ ] for 3 seconds to select language from therolling display:

“DE” (German), “FR” (French), “IT” (Italian), “SP” (Spanish), “DU” (Dutch),

“SW” (Swedish) or “EN” (English). Release thebutton once thedesired

language is shown.

Dual time zone setting

1. Hold in [ ▲ ] until “F” appears in thedisplay.

2. Set the[ Date set, Time set, Alarm set — ] switch in the Time set position.

3. Press [ ▲ ] or [ ▼ ] until thedesired time zone is displayed (-12 to +12 hours).

4. Set the[ Date set, Time set, Alarm set — ] switch in the— position once all

desired settings have been entered.

5. Hold in [ ▲ ] to switch between local/normal time display and theother time zone.

Snooze function

Press [ ▲ ] or [ ▼ ] when thealarm sounds to activate thesnooze function.

The alarm will pause and then sound again after 4 minutes.

Display illumination

Press [ ▲ ] or [ ▼ ] to turn on thebacklight. The backlight has a5-second duration

and turns off automatically.

Care and maintenance

Clean theproduct using alightly moistened cloth. Only use mild cleaning agents,

never solvents or corrosive chemicals.

Troubleshooting guide

The clock is not working. • Check that thebatteries are not ﬂat.

• Check for correct battery insertion.

Disposal

This product should be disposed of in accordance with local regulations.

If you are unsure how to proceed, contact your local authority.

Specifications

Batteries 2×AAA/LR03

Size 80×80×30 mm

1. [ Alarm on/off ]

2. [ Date set, Time set,

Alarm set — ]

Display symbols

Time signal received

Time signal scan

PM (shown only for the12-hour clock display)

Alarm

Snooze

Time zone

British Summer Time (GMT+1)

Low battery

Operating instructions

1. Open thebattery cover by sliding it downwards.

2. Insert 2×AAA/LR03 batteries. Note thepolarity markings in thebattery

compartment to ensure correct insertion.

3. Once thebatteries have been inserted theclock will immediately begin

scanning for thetime signal transmission

4. If thetime signal is received, both time and date will automatically be set and

thereceived time signal icon will appear.

If no time signal is received, thesearch icon will stop ﬂashing and no icon willap-

pear. The time and date must also be set manually.

Manually setting thedate

1. Set the[ Date set, Time set, Alarm set — ] switch in the Date set position.

2. Hold in [ ▲ ] or [ ▼ ] until thecorrect year appears. Release thebutton when

thecorrect year is shown.

3. Hold in [ ▲ ] or [ ▼ ] until thecorrect month appears. Release thebutton when

thecorrect month is shown.

4. Hold in [ ▲ ] or [ ▼ ] until thecorrect day appears. Release thebutton when

thecorrect day is shown.

Manually setting thetime

1. Set the[ Date set, Time set, Alarm set — ] switch in the Time set position.

2. Hold in [ ▲ ] or [ ▼ ] until thecorrect time appears.

Setting thealarm

1. Set the[ Date set, Time set, Alarm set — ] switch in the Alarm set position.

2. Hold in [ ▲ ] or [ ▼ ] until thecorrect alarm time appears.

3. Set the[ Date set, Time set, Alarm set — ] switch in the— position once all

desired settings have been entered.

Need help?

Number of questions: 0

Do you have a question about the Clas Ohlson RC123 or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Clas Ohlson RC123 owners to properly answer your question.

About the Clas Ohlson RC123

View the manual for the Clas Ohlson RC123 here, for free. This manual comes under the category Clock Radio and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Clas Ohlson RC123 or do you need help? Ask your question here