You can set time difference from the time of [TME] in 1-hour increments to
indicate the local time.
• The time difference is adjustable within a range of ±27 hours from the time of
[TME].
1.
Pull the crown out to position
1
.
2.
Rotate the crown to change the mode to [L-TM].
Local time is indicated.
3.
Pull the crown out to position
2
.
4.
Rotate the crown to adjust the hour hand.
• The hour hand moves in 1-hour increments and the 24-hour hand moves
synchronously with it.
• When you rotate the crown quickly, the hand will move continuously. To
stop the rapid movement, rotate the crown in either direction.
5.
Push the crown in to position
0
to finish the procedure.
Checking the reference position
1.
Pull the crown out to position
1
.
2.
Rotate the crown to change the mode to [CHR].
3.
Pull the crown out to position
2
.
The hands and indication start to move to the current reference positions
stored in memory.
4.
Check the reference position.
Correct reference positions:
• Hour, minute and second hands: 0
hour 00 minute 00 second
• 24-hour hand: “24”
• Date indication: “1”
• Function hand: “.0”
When the current reference position
is different from the correct one, adjust the position following the steps of
“Correcting the reference position”.
5.
Push the crown in to position
0
to finish the procedure.
Correcting the reference position
1.
Pull the crown out to position
1
.
2.
Rotate the crown to change the mode to [CHR].
3.
Pull the crown out to position
2
.
The hands and indication start to move to the current reference positions
stored in memory.
4.
Press and hold the upper right button
B
for 2 seconds or more.
5.
Press and release the upper right button
B
repeatedly to
change the hand/indication to be corrected.
• Each time you press the button, the target changes as follows:
Function hand/date indication → hour/minute/24-hour hands → second hand
→ (back to the top)
6.
Rotate the crown to adjust the hand/indication.
• The hour, minute and 24-hour hands move synchronously.
• Date indication changes to the next as the function hand rotates 4 times.
• When you rotate the crown quickly a few times, the hand/indication will
move continuously. To stop the rapid movement, rotate the crown in either
direction.
7.
Repeat steps 5 and 6.
8.
Push the crown in to position
0
to finish the procedure.
Resetting the watch - All Reset
1.
Pull the crown out to position
1
.
2.
Rotate the crown to change the mode to [CHR].
3.
Pull the crown out to position
2
.
The hands and indication start to move to the current reference positions
stored in memory.
4.
Press and release both the lower right button
A
and upper
right button
B
at the same time.
As you release the buttons, the alarm sounds and all reset is executed.
5.
Push the crown in to position
0
to finish the procedure.
After All Reset
After All Reset, adjust the reference position and set the time and calendar and
other settings.
View the manual for the Citizen BL5472-01E here, for free. This manual comes under the category Watches and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Citizen BL5472-01E or do you need help? Ask your question here
Need help?
Do you have a question about the Citizen and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Citizen owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Citizen BL5472-01E below.
A battery in my Watch has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
Is the manual of the Citizen BL5472-01E available in English?
Yes, the manual of the Citizen BL5472-01E is available in English .
Need help?
Do you have a question about the Citizen and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Citizen owners to provide you with a good answer.
Number of questions: 0