• This watch is light-powered. Be sure your watch is fully charged before use.
• For complete instructions for setting, use, charging time and specifications, refer to the full instruction manual:
H50x/
H57x instruction manual
Setting the time
1.
Pull the crown out to position
2
when the second hand
points to 12:00 (0 second).
2.
Rotate the crown to set the time.
• Referring to the 24-hour hand, set the time to ensure proper AM or
PM time is set.
• Move the hands 4 or 5 minutes forward of desired minutes and move
them back to the right time to set the time more precisely.
3.
Push the crown in to position
0
in accordance with a
reliable time source.
The second hand starts moving.
H57x
Minute hand
Minute hand
24-hour hand
24-hour hand
Date indication
Date indication
Button
Ⓐ
Button
Ⓐ
Chronograph
second hand
Chronograph
second hand
Chronograph
minute hand
Chronograph
minute hand
Second hand
Second hand
Hour hand
Hour hand
Button
Ⓑ
Button
Ⓑ
Crown
Crown
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
• Illustrations for reference only. Actual appearance of
your watch may differ from the illustrations above.
Setting the date indication
• Do not adjust the date indication when the watch shows 9:00 PM - 1:00
AM. Otherwise the date indication may change incorrectly.
• Date indication adjustment is required on the first of the following months:
March, May, July, October and December.
1.
Pull the crown out to position
1
.
2.
Rotate the crown clockwise to adjust the date indication.
• Counterclockwise rotation moves nothing.
3.
Push the crown in to position
0
.
Using the chronograph
Movement Caliber H50x can measure up to 60 minutes by 1 second.
Movement Caliber H57x up to 30 minutes by 1 second.
• The hour, minute and 24-hour hands move normally during chronograph
measurement.
1.
Push the crown in to position
0
.
Start/stop:
press and release the upper right button
Ⓑ
.
• Press and release lower right button
Ⓐ
to return the chronograph
minute hand to 00 minute position before starting measurement if it is
not at the position.
Reset:
press and release lower right button
Ⓐ
while the chronograph is
stopped.
• Applying strong shock to the watch during chronograph measurement
may move the chronograph minute hand to an incorrect position. In
such a case, press button
Ⓐ
securely to return the chronograph minute
hand to 00 minute position.
Adjusting the chronograph second hand to the 0 second position
Execute the operation below when the chronograph second hand does not
return to 0 second position after resetting or the hand points to an incorrect
position because of strong shock or other reasons.
• You cannot execute this operation when the insufficient charge warning
function is activated. You must fully charge your watch.
1.
Pull the crown out to position
2
.
2.
Press and hold the upper right button
Ⓑ
for 3 or more seconds.
• Press and release the upper right button
Ⓑ
to adjust the chronograph
second hand to 0 second position (12:00 position).
Each time you press the button, the hand moves by 1 second.
Press and hold the button to move the hand continuously.
3.
Push the crown in to position
0
.
• Press and release the lower right button
Ⓐ
to confirm the chronograph
minute hand returns to 00 minute position.
Crown
’
s position
012
Crown
’
s position
012
Component identification
H50x
CITIZEN WATCH CO., LTD.
ENGLISH
View the manual for the Citizen AT2100-09E here, for free. This manual comes under the category Watches and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Citizen AT2100-09E or do you need help? Ask your question here
Need help?
Do you have a question about the Citizen and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Citizen owners to provide you with a good answer.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Citizen AT2100-09E below.
A battery in my Watch has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
Is the manual of the Citizen AT2100-09E available in English?
Yes, the manual of the Citizen AT2100-09E is available in English .
Need help?
Do you have a question about the Citizen and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Citizen owners to provide you with a good answer.
Number of questions: 0