Cisco AIR-AP2702I-UX-WLC manual

Cisco AIR-AP2702I-UX-WLC
7.3 · 1
PDF manual
 · 44 pages
English
manualCisco AIR-AP2702I-UX-WLC
GETTING STARTED GUIDE

Cisco Aironet 2700 Series Access Points

1 About this Guide
2 Introduction to the Access Point
3 Safety Instructions
4 Unpacking
5 Configurations
6 Access Point Ports and Connectors
7 Configuring the Access Point
8 Mounting the Access Point
9 Deploying the Access Point on the Wireless Network
10 Troubleshooting
11 Declarations of Conformity and Regulatory Information
12 Configuring DHCP Option 43 and DHCP Option 60
13 Access Point Specifications

Manual

View the manual for the Cisco AIR-AP2702I-UX-WLC here, for free. This manual comes under the category Access points and has been rated by 1 people with an average of a 7.3. This manual is available in the following languages: English. Do you have a question about the Cisco AIR-AP2702I-UX-WLC or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Cisco AIR-AP2702I-UX-WLC and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Cisco AIR-AP2702I-UX-WLC owners to provide you with a good answer.

Number of questions: 0

Cisco AIR-AP2702I-UX-WLC specifications

Below you will find the product specifications and the manual specifications of the Cisco AIR-AP2702I-UX-WLC.

General
Brand Cisco
Model AIR-AP2702I-UX-WLC | AIR-AP2702I-UX-WLC
Product Access Point
EAN 882658817717, 0882658817717
Language English
Filetype Usermanual (PDF)
Features
Maximum data transfer rate 1300 Mbit/s
Ethernet LAN data rates 10,100,1000 Mbit/s
Wi-Fi data rate (max) 1300 Mbit/s
Frequency band 2.4, 5 GHz
Number of users - user(s)
Modulation -
Receiver sensitivity 802.11b (CCK)\r\n-102 dBm @ 1 Mbps\r\n-100 dBm @ 2 Mbps\r\n-93 dBm @ 5.5 Mbps\r\n-90 dBm @ 11 Mbps\r\n\r\n802.11g (non HT20)\r\n-93 dBm @ 6 Mbps\r\n-93 dBm @ 9 Mbps\r\n-93 dBm @ 12 Mbps\r\n-92 dBm @ 18 Mbps\r\n-89 dBm @ 24 Mbps\r\n-86 dBm @ 36 Mbps\r\n-81 dBm @ 48 Mbps\r\n-80 dBm @ 54 Mbps\r\n\r\n802.11a (non HT20)\r\n-93 dBm @ 6 Mbps\r\n-93 dBm @ 9 Mbps\r\n-93 dBm @ 12 Mbps\r\n-92 dBm @ 18 Mbps\r\n-89 dBm @ 24 Mbps\r\n-86 dBm @ 36 Mbps\r\n-81 dBm @ 48 Mbps\r\n-80 dBm @ 54 Mbps\r\n\r\n802.11ac (non HT80)\r\n-86 dBm @ 6 Mbps\r\n-75 dBm @ 54 Mbps
Channel bandwidth 80 MHz
Channels quantity 21 channels
Networking standards IEEE 802.11a,IEEE 802.11ac,IEEE 802.11b,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1x,IEEE 802.3at
Transmitting power 23 dBmW
2.4 GHz
5 GHz
Wi-Fi Multimedia (WMM)/(WME)
Performance
Flash memory 64 MB
Internal memory 512 MB
Design
Certification UL 60950-1, CAN/CSA-C22.2 No. 60950-1, UL 2043, IEC 60950-1, EN 60950-1, EN 50155, FCC, RSS-210, EN 300.328, EN 301.893, ARIB-STD 66, ARIB-STD T71, EMI, ICES-003, VCCI, EN 301.489-1, EN 60601-1-2 EM
Internal -
LED indicators
Placement Ceiling
Product colour White
Ports & interfaces
WAN connection Ethernet (RJ-45)
DC-in jack
Ethernet LAN (RJ-45) ports 3
USB 2.0 ports quantity 0
Security
Security algorithms 802.1x RADIUS,AES,EAP,EAP-FAST,EAP-PEAP,EAP-SIM,EAP-TLS,EAP-TTLS,TKIP,WPA,WPA2
Antenna
Antenna gain level (max) 6 dBi
Antennas quantity 2
Antenna features Integrated antenna
Antenna direction type Omni-directional
Power
Power consumption (typical) 15 W
AC input voltage 100 - 240 V
AC input frequency 50 - 60 Hz
Power over Ethernet (PoE)
Operational conditions
Operating relative humidity (H-H) 10 - 90 %
Operating temperature (T-T) 0 - 40 °C
Storage temperature (T-T) -30 - 70 °C
Operating altitude 0 - 3000 m
Non-operating altitude 0 - 4572 m
Weight & dimensions
Width 221 mm
Depth 221 mm
Height 51 mm
Weight 1000 g
Packaging content
AC adapter included
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Cisco AIR-AP2702I-UX-WLC below.

Is your question not listed? Ask your question here

No results