View the manual for the Christopeit AX 8000 here, for free. This manual comes under the category hometrainers and has been rated by 1 people with an average of a 7.1. This manual is available in the following languages: English. Do you have a question about the Christopeit AX 8000 or do you need help? Ask your question here
| Brand | Christopeit |
| Model | AX 8000 |
| Product | hometrainer |
| EAN | 4044163020099 |
| Language | English |
| Filetype | User manual (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Christopeit AX 8000 below.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
If the Christopeit AX 8000 hometrainer is not functioning properly, you can follow these steps to troubleshoot the issue: 1. Check the power supply: Ensure that the power adapter is properly plugged in and that the wall power is functioning correctly. You can try using the power adapter with another electric device to verify its functionality. 2. Verify sensor connections: If the computer is not counting data or not switching on after starting cycling, check the plug connections at the computer and inside the handlebar support. Make sure they are securely connected and not damaged. 3. Check sensor position: If the computer is not counting data, and the sensor impulse is missing, it could be due to an incorrect position of the sensor. Remove the cover and check the distance between the magnet and the sensor. The magnet at the turning belt wheel should have a distance of less than 5mm from the sensor. 4. Ensure pulse cable connection: If there is no pulse value displayed, check if the separately provided pulse cable is properly connected to the computer. Also, inspect the connections of the pulse cable to ensure they are secure and undamaged. If you are unable to resolve the issue with these troubleshooting steps, it is recommended to contact the authorized service center for further assistance.
To troubleshoot any issues during the assembly process of the Christopeit AX 8000 hometrainer, you can follow these steps: 1. Start by removing all the separate parts from the packaging and lay them on the floor. Check that all the parts are present based on the assembly steps provided in the manual. 2. Begin by attaching the front stabilizer, which is preassembled with front caps and transportation rollers, to the main frame using the provided bolts, washers, spring washers, and cap nuts. 3. Next, attach the rear stabilizer, which is also preassembled with height adjustable caps, to the main frame using the provided bolts, washers, spring washers, and cap nuts. Adjust the height of the rear caps if needed for stability on uneven floors. 4. Proceed to assemble the pedal cranks by placing the pedal crank onto the pedal crank holder and securing it tightly with the provided screw and spring washers. Attach the crank cover onto the pedal crank and secure it with the provided screws. Finally, attach the crank plug to the crank cover. 5. Install the handgrip bars onto the connecting tubes by aligning the holes and securing them firmly with the provided screws, curved washers, and spring washer. Ensure that the upper ends of the handgrip bars are inclined outwards. 6. Attach the footrest holder to the connecting tube by aligning the holes and tightening it with the provided screw, washers, and nut. Take care not to overtighten this connection point to allow for easy movement. 7. Place the preassembled unit of the right footrest holder and connecting tube on the right-hand side of the main frame. Note that the right side is specified when viewed standing on the machine during training. 8. Finally, connect the computer cable harnesses projecting from the support and main frame together. Ensure that the cable connection is not trapped and will not slide into the tube. Push the plastic cover and rubber ring into the right position to cover the connection point. By following these steps, you can troubleshoot any issues that may arise during the assembly process of the Christopeit AX 8000 hometrainer.
If you are having difficulty mounting or dismounting the Christopeit AX 8000 hometrainer, you can follow these steps: 1. Mounting: a. Stand beside the hometrainer and hold the fixed handlebar tightly. b. Place one foot onto the footrest, ensuring it is in the deepest position, and put your body weight on that foot. c. Simultaneously, cross over with your other foot and place it on the other footrest. d. Now you are in the position to start your training. 2. Using: a. Keep your hands in the desired position on the fixed handlebar. b. Step on the footrests and balance your body weight from left to right. c. If you want to exercise your upper body, you can place your hands on the left and right handle grips. d. Gradually increase the pedaling speed and adjust the braking resistance levels to increase the intensity of your exercise. e. Always keep your hands on the fixed handlebar or hand grips. 3. Dismounting: a. Slow down the pedaling speed until the hometrainer comes to a rest. b. Hold the fixed handlebar tightly and put one foot across the hometrainer, landing it on the floor. c. Then, land the other foot on the floor. By following these steps, you should be able to mount and dismount the Christopeit AX 8000 hometrainer without difficulty.
To troubleshoot any problems with the computer on the Christopeit AX 8000 hometrainer, you can follow these steps: 1. Check the power supply: Ensure that the power adapter is properly plugged in and that the wall power is functioning correctly. You can try using the power adapter with another electric device to verify its functionality. 2. Verify sensor connections: If the computer is not displaying any values or not switching on after starting cycling, check the plug connections at the computer and inside the handlebar support. Make sure they are securely connected and not damaged. 3. Check sensor position: If the computer is not displaying any values and the sensor impulse is missing, it could be due to an incorrect position of the sensor. Remove the cover and check the distance between the magnet and the sensor. The magnet at the turning belt wheel should have a distance of less than 5mm from the sensor. 4. Ensure pulse cable connection: If there is no pulse value displayed, check if the separately provided pulse cable is properly connected to the computer. Also, inspect the connections of the pulse cable to ensure they are secure and undamaged. If you are unable to resolve the issue with these troubleshooting steps, it is recommended to contact the authorized service center for further assistance.
To troubleshoot any issues with cleaning, checks, storage, or troubleshooting on the Christopeit AX 8000 hometrainer, you can follow these steps: 1. Cleaning: - Use a slightly damp cloth to clean the hometrainer. Avoid using aggressive cleaning agents like benzene or thinner, as they can damage the surface. - Keep the hometrainer clean and free from moisture. 2. Storage: - If you are not planning to use the hometrainer for more than 4 weeks, unplug the power supply unit. - Choose a dry storage area indoors and apply some spray oil to the front and rear foot tube connection points and hand grip axle. - Cover the hometrainer to protect it from sunlight and dust. 3. Checks: - Every 50 hours of use, review the tightness of the screw connections that were prepared during assembly. - Every 100 operating hours, apply some spray oil to the front and rear foot tube connection points and hand grip axle. If you encounter any problems that cannot be resolved with these steps, it is recommended to contact the authorized service center for further assistance.
Yes, the manual of the Christopeit AX 8000 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Christopeit and is the answer not in the manual?
Question and answer
Number of questions: 0