1. Never store the battery in a depleted state as the cells can be damaged.
2. Discharge & charge the battery at least once every 3 months to maintain its capacity.
3. Keep the Headwear away from corrosive materials, harsh chemicals, fire and heaters.
4. The Headwear meets IP55 for basic rain/snow/sweat proof. Do not soak electronics!
Maintenance:
1. Put the Bluetooth Beanie in Pair mode by pressing Power for a few seconds.
The Indicator LED will be blinking Blue & Red alternately and the Headwear will search for a new Host.
2. Turn on Bluetooth on your Smartphone / Host and search for new Bluetooth devices.
For iPhone/iPad: Go to Settings > General > Bluetooth (when enabled it will start searching)
3. Choose your Chill Headwear when it appears on your search list on your host device.
Please enter 0000 if a password is required on some devices.
4. When successfully connected the LED will slowly blink Blue, and you are ready to play!
Pairing is only required the first time. Once paired, the Headwear will Auto Connect when available.
5. Press for a few seconds to turn the Headwear on / off for daily use with paired devices.
Both Sound and LED light will indicate when the Headwear is beeing powered on or off.
Blue & Red blinking: Searching for a Bluetooth HostBlue blinking: On and Paired with a Bluetooth HostRed blinking: Low battery (please start recharging)Red light: Charging battery (will turn off when recharged)
Indicator LED
When low battery, the LED will start to blink Red and you will get an audio notice.
Connect the Micro-USB cable to the USB Port and a suited USB Power Source.
The LED will light Red when charging, and turn off when fully charged.
NOTICE: Fully charge the battery for first time use (until LED indicator turns off).
Charging the Battery:
1. Long press Volume & Volume buttons to adjust the volume accordingly.
2. Shortly press Previous & Next buttons to skip track (if supported in host/app)
3. Press Play/Pause to pause and/or resume music (if supported in host/app)
4. Press & together simultaneously to hear a battery capacity status.
Using Your Bluetooth Headwear:
1. Press the button shortly to answer an incoming telephone call and to hang up.
2. Press the button long to decline an incoming telephone call.
3. Press the button fast twice to redial the last called number in the phone call log.
1. Gentle ease out the control panel and speaker from their pockets inside the dual layers.
2. Depending on the design, your Headwear might have an opening in the rear.
3. Delicate hand wash the Beanie (without electronics) cold & air dry flat. Do NOT wring hard or tumble dry!
Washing & removal of electronics:Control Panel
Chill Bluetooth Headwear
D E N M A R K
RoHS
cCUH
-
Whatsapp
Mail
Facebook
Need help?
Number of questions: 0
Do you have a question about the Chill Innovation BB-01G or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Chill Innovation BB-01G owners to properly answer your question.
About the Chill Innovation BB-01G
View the manual for the Chill Innovation BB-01G here, for free. This manual comes under the category Headphones and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Chill Innovation BB-01G or do you need help? Ask your question here
Below, you will find the most frequently asked questions about the Chill Innovation BB-01G.
When is my volume too loud?
A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.
Can I make hands-free calls with my Headphone?
The newer Headphones generally have a small microphone built in which allows for calling.
What is noise cancelling?
Noise cancelling ensures that ambient noise is reduced.
What is bluetooth?
Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.
What is the weight of the Chill Innovation BB-01G?
The Chill Innovation BB-01G has a weight of 100 g.
How long does it take to charge the battery of the Chill Innovation BB-01G?
It takes 2 h to charge the battery of the Chill Innovation BB-01G.
Is the manual of the Chill Innovation BB-01G available in English?
Yes, the manual of the Chill Innovation BB-01G is available in English .
