Chacon 34949 manual

Chacon 34949
8.6 · 1
PDF manual
 · 28 pages
English
manualChacon 34949

Pet Immune PIR Motion Sensor

The Motion Sensor is designed for use on interior walls and is set to Home Mode by default. Whenever the Sensor detects movement (while the alarm is armed) you triggered and the Control Panel Internal Siren will sound immediately.LED flashes once when movement is detected

Tamper Switch

The Tamper Switch (a black button with a silver spring at the top, located inside this Sensor) is used to indicate an unauthorized attempt to remove its cover. Whenever this button is released, it will trigger an alarm and the push alert will notify you which Sensor has been triggered on tamper.

Low Battery Indication

If the LED indicator blinks once per 3 second, the battery must be replaced.Working ModeTest ModeThe Sensor enters a 1 minute settling down period on power up, thereafter entering into Test Mode. In Test Mode, the Sensor detects movement every 10 seconds and emits an alarm signal every time movement is detected. Test Mode will remain active for 3 minutes, thereafter entering into Power Saving Mode.
Note: You may also enter Test Mode by pressing the Test Button at the back of the Sensor.
Power Saving Mode
If the Sensor detects movement twice within 3 minutes the Sensor will automatically
enter into Sleep Mode and no movement will be detected. The Sensor will leave Sleep Mode after a 3 minute period without any movement.
Sleep after detecting human movement twice.
Case 1:
Initial start and then arm.
3 minutes later
No human movement within 3 minutes
Switch from sleep to arm.
Case 2:
Press the test button and then arm.

Pairing New Accessories to the Control Panel

There are two ways of pairing Accessories to the Control Panel manually and via
App.
Manual Pairing
To pair Accessories manually please follow the instructions below:
Remote Control and Sensors:
1. Press the Learn button at the back of the Control Panel
2. Press any button on the Remote Control or trigger the Sensor
Very Important: Please note that pressing the Tamper Switch instead of triggering
the Sensor will register it as a 24 Hour Zone.
(Optional Accessory) Wireless Siren:
1. Press the Learn Button on the Siren
2. Arm the Control Panel via the App
Pairing from the App
To pair the Accessories via App, open the AW1 Alarm App, go to ‘Edit Accessories’
and follow the instructions on the screen.

WiFi Setup

Step One: Download the App
The App can be downloaded from the App Store or Google Play by searching for
AW1 Alarm”.
Step Two: Power On
1. Remove the back cover from the Control Panel.
2. Connect the Power Adapter.
3. Set the Power Switch to “ON”.
4. Wait until the WiFi Indicator starts to blink (approx. 30 seconds)
Note: The Control Panel will emit a short ‘beep’ every 3 seconds when powered up. After 30
sta tus
Step Three: Connect the Control Panel to the Router
Important: AW1 does not support WiFi of 5GHz band, If dual-band(5GHz and 2.4GHz) router is used, make sure to connect with the 2.4GHz WiFi instead of the 5GHz's. Make sure your smartphone is connected to the local WiFi network and then follow the steps in the App to connect the AW1 Control Panel to the Router. 1. Press and hold the [WiFi] Button inside the Control Panel for 3 seconds, the Control Panel will emit one ‘beep’.
2. Tap [WiFi] in the [Settings] of your smartphone, and select the ‘WiFi Alarm’
network.3. Return to the App and key in your WiFi name and password or open the drop down menu to scan for all the nearby wireless networks.4. The Control Panel will beep once, wait until the WiFi indicator and the Status indicator stop blinking, indicating that the Control Panel has successfully connected to the network.

Manual

View the manual for the Chacon 34949 here, for free. This manual comes under the category alarm system and has been rated by 1 people with an average of a 8.6. This manual is available in the following languages: English. Do you have a question about the Chacon 34949 or do you need help? Ask your question here

Need help?

Do you have a question about the Chacon and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Chacon 34949 specifications

Below you will find the product specifications and the manual specifications of the Chacon 34949.

The Chacon 34949 alarm system is a security solution designed to protect residential and commercial properties. Its objective is to deter potential intruders and notify property owners of any unauthorized access or suspicious activity. The Chacon 34949 alarm system features a range of sensors and detectors that can be strategically placed throughout the property. These include door and window sensors, motion detectors, and glass break sensors. When triggered, the system activates a loud siren and sends an alert to the property owner or a monitoring center. With its advanced technology, the Chacon 34949 alarm system offers various options for arming and disarming. This can be done through a control panel located inside the property or remotely using a smartphone app. The system also supports multiple user codes, allowing for personalized access and monitoring. The Chacon 34949 alarm system is known for its user-friendly interface, making it easy to set up and operate. It also offers features like programmable entry and exit delays, which provide users with the flexibility to customize their security settings. Furthermore, the Chacon 34949 alarm system is compatible with additional security devices, such as CCTV cameras and smoke detectors. This integration allows for comprehensive surveillance and protection. Overall, the Chacon 34949 alarm system provides reliable security and peace of mind for both residential and commercial properties. Its advanced features, ease of use, and compatibility make it a suitable choice for individuals and businesses seeking effective security solutions.

General
BrandChacon
Model34949 | 34949
Productalarm system
EAN5411478349495
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Chacon 34949 below.

How do I set the alarm time on my Chacon 34949 alarm system?

Press the "Set Time" button on the alarm system panel, then use the arrow keys to adjust the hour and minute values. Finally, press the "Set" button to save the desired alarm time.

Why is the alarm beeping continuously on my Chacon 34949 alarm system?

Continuous beeping usually indicates a fault. Check if any windows or doors are ajar, verify if the batteries are low, or inspect for any signs of a malfunctioning sensor. Try addressing these possible issues to resolve the continuous beeping.

How can I program additional sensors to my Chacon 34949 alarm system?

Start by accessing the system's programming menu, usually found under the "Settings" or "Program" option on the panel. From there, follow the prompts to add new sensors by entering their unique identification codes or pressing the pairing button on the sensor itself.

What should I do if I forget the security code for my Chacon 34949 alarm system?

In cases of forgotten security codes, it is usually necessary to perform a factory reset on the alarm system. To do this, locate the reset button (typically a small pinhole) on the panel and hold it down for at least 10 seconds. This will clear all user settings, including the security code, so ensure you have the necessary documentation or assistance to reprogram the system afterward.

How do I deactivate the alarm system temporarily on my Chacon 34949?

To temporarily deactivate the alarm system, locate the "Arm" or "Activate" button on the panel and press and hold it for a few seconds. This will put the system into a standby mode, allowing you to move freely within the protected area without triggering any sensors. Remember to reactivate the alarm system when you are done by using the same "Arm" button.

Is the manual of the Chacon 34949 available in English?

Yes, the manual of the Chacon 34949 is available in English .

Is your question not listed? Ask your question here

No results