Celly MAGPB5000 manual

Celly MAGPB5000
7.5 · 1
PDF manual
 · 15 pages
English
manualCelly MAGPB5000
Please read this manual and
pay attention to the safety
warnings before using the
product Keep the manual to
have the possibility to consult it at a later
time, or in case of passing the product to
a third party.
Esprinet S.p.A. can not in any way be
held responsible for injury or damage
caused to people or things resulting from
improper use of the product.
Safety notes
To avoid malfunction or damage to the
product, avoid accidental falls, do not
crush, puncture or exert a high level
of pressure on the product. is could
cause an internal short circuit and / or
overheating.
Keep away from moisture, water or other
liquids. If the product comes into contact
with water, moisture or other liquids,
do not use the product to avoid electric
shock, explosion or damage.
If the product gets wet, even if it dries
and operates normally, the battery
contacts and circuitry may slowly corrode
and pose a safety hazard.
Do not store or expose the product to
any heat source, direct sunlight, radiators,
stoves or other heat sources such as the
dashboard of your car in the summertime.
is could cause the battery to explode
or affect performance. Never use the
product unsupervised.
During operation, the casing will become
hot. Allow adequate ventilation. e
casing must never be covered.
Never use the product when moving
from a cold to a warm environment.
Condensation may occur which, in some
cases, could damage the product.
Allow the product to reach room
temperature before plugging it back in
and using it again. is could take several
hours. Usage temperature: 0-40 ° C.
Do not attempt to modify, repair
or disassemble the product. Risk of
explosion!
Do not leave the product in contact with
metal objects.
Metallic objects can interfere with
the electrical connections causing the
protection circuit to malfunction.
Stop using the product immediately if you
notice any swelling, dispersion or other
abnormality.
Do not use a damaged product.
Make sure the cable provided for charging
the product is intact and does not short
circuit the charging ports.
A non-replaceable rechargeable battery
is built into the product, never open or
disassemble the product. Do not short-
circuit the battery contacts / terminals.
Do not dispose of the product in open
flames. Danger of explosion and fire!
Charge the battery regularly, even when
the product is not in use. is will extend
its life (at least once every 2 months)
Never charge the product when
unattended. While charging, place the
product on a heat-resistant surface. Heat
build-up is normal during charging.
Under no circumstances use aggressive
cleaning agents, alcohol or other chemical
solutions for cleaning as they could
damage the housing or even compromise
the functionality of the product.
Disconnect all connected cables before
starting cleaning. Do not immerse the
product in water or other liquids.
Do not press too hard on the housing
to avoid scratches and damage. Keep
the product out of the reach of children.
Never allow children or people with
disabilities to use electrical products
unsupervised.
Make sure children do not play with
the plastic wrap. ey could swallow
fragments and choke.
Charging the power bank
1. Plug the smaller end of the supplied
USB-C cable into the USB-C port on the
power bank.
2. Plug the larger end of the cable
(USB-A) into the USB port of a charging
socket or computer (DC 5V, 2A), and the
smaller end (USB-C) into the charging
socket (IN). Charging of the power bank
will start. It is recommended to charge
12 hours for the first charge cycle. During
charging, the LEDs on the product will
flash. At the end of the charge, the LEDs
will stop flashing and remain on. e time
required for recharging is approximately
3 hours.
3. Disconnect the USB-C cable from the
charging input port (IN) of the powerbank
after charging.
Loading devices
1. Make sure the power bank is
sufficiently charged.
2. Before charging the device, make sure
that the technical characteristics of your
device (voltage, amperage) are compatible
with the power bank.
Charging with USB cable
Connect the device to the USB port of
the powerbank using the original cable
supplied with your device. Charging of the
device will start.
Once charging is complete, disconnect
the cable from the device and the power
bank.
Wireless charging
Magnetically align the power bank to
the phone and press the button charging
start button on the right side of the
product, wireless charging will start.
Once charging is complete, unplug the
power bank from the phone.
Cleaning
Disconnect all cables before cleaning.
If necessary, clean the power bank with a
damp cloth and allow it to dry completely
before use.
Use a clean brush with soft, long bristles
to remove dust from the connectors.
Do not use solvents, corrosive agents or
gaseous cleaners.
Make sure that water or other liquids do
not enter the housing.
Storage
Store the power bank in a clean and dry
area. Keep away from direct sunlight.
CUSTOMER’S INFORMATION
FOR RIGHT WASTE OF THIS
PRODUCT (Directive 2013/56/
EU)
e crossed-out bin symbol shown on the
equipment or on its packaging indicates
that the product at the end of its useful
life, including the non-removable battery,
must be collected separately from other
waste to allow for proper treatment and
recycling. e safe use of this product
is guaranteed in compliance with the
following instructions, therefore it is
necessary to keep them and follow
them scrupulously throughout the life
of the product. e product does not
require technical maintenance, NEVER
DISASSEMBLE IT. e battery inside is
integrated and not replaceable. Do not
attempt to remove the built-in Lithium
Ion / Polymer battery by yourself as it
may cause overheating, fire and injury.
e battery should only be removed by
independent qualified professionals who
are able to remove it safely and disposed
of in accordance with applicable laws. e
user must, therefore, give the equipment
at the end of its life free of charge to
the appropriate municipal centers for
the separate collection of electrical and
electronic waste, or return it to the
retailer, on a one-by-one basis, or free
of charge for appliances with smaller
external dimensions. to 25 cm. Adequate
separate collection for the subsequent
sending of the decommissioned
equipment for recycling, treatment and
environmentally compatible disposal
helps to avoid possible negative effects
on the environment and health and
favors the reuse and / or recycling of the
materials of which it is composed the
equipment. Illegal disposal of equipment,
batteries and accumulators by the user
involves the application of the penalties
provided for by the current legislation.
Technical specifications
Input: DC 5V / 2A
Output 1: DC 5V / 2A
Output 2: DC 5V / 2A
Total output: DC 5V / 2A
Wireless output: DC 5V / 1A, 9V / 1.1A
Max output power: 10W
Maximum radiated power: <20 mW
Frequency: 110-205KHz
Charging time: 3 hours
Capacity: 5000mAh / 18.5Wh
Software: SW6201
Battery type: Li-ion battery
Weight: 135g
Size: 96 * 63 * 12mm
Usage temperature: 0 - 40 °
is product complies with
RoHS 2011/65 / EU-2015/863
/ EU. e product is marked
with the CE mark and complies with the
safety standards established by the
European Union.
Esprinet SpA declares that the product
complies with directive 2014/53 / EU.
e full text of the EU declaration of
conformity is available at the following
Internet address: www.celly.com/
exchange/CELLY-SPA/Dichiarazioni_di_
conformita/MAGPB5000/DOC.pdf
Celly® is a trademark owned by CELLY
S.p.A.
All brands are registered trademarks of
their respective owners.

Esprinet S.p.A., via Energy

Park 20, 20871 Vimercate

(MB) - Italy

Made in China.

Instruction manual
PORTABLE WIRELESS CHARGER
Model: MAGPB5000
Rev00 - 30.09.2021
EN

View the manual for the Celly MAGPB5000 here, for free. This manual comes under the category power banks and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Celly MAGPB5000 or do you need help? Ask your question here

Need help?

Do you have a question about the Celly and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCelly
ModelMAGPB5000 | MAGPB5000WH
Productpower bank
EAN8021735193456
LanguageEnglish
FiletypeUser manual (PDF)
Design
Number of simultaneously connected devices (max)1
Product colorWhite
Charger compatibilityMobile phone/Smartphone
Power bank & device charging at onceYes
ShapeRectangle
Performance
Wireless chargingYes
Charging sourceUSB
Battery capacity5000 mAh
Battery technology-
Battery charge time (USB)3 h
Fast charging-
Weight & dimensions
Width63 mm
Height95 mm
Depth15 mm
Weight135 g
Power
Input voltage5 V
Input current2 A
Output voltage5 V
Output current2 A
Total output power10 W
Ports & interfaces
Input interfaceUSB Type-A
USB Type-C connectorYes
USB Type-A output ports1
USB Type-C ports quantity1
USB Type-A connectorYes
Packaging data
Quantity per pack1 pc(s)
Packaging content
Cables includedUSB Type-A to USB Type-C
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Celly MAGPB5000 below.

What is the weight of the Celly MAGPB5000?

The Celly MAGPB5000 has a weight of 135 g.

What is the height of the Celly MAGPB5000?

The Celly MAGPB5000 has a height of 95 mm.

What is the width of the Celly MAGPB5000?

The Celly MAGPB5000 has a width of 63 mm.

What is the depth of the Celly MAGPB5000?

The Celly MAGPB5000 has a depth of 15 mm.

Is the manual of the Celly MAGPB5000 available in English?

Yes, the manual of the Celly MAGPB5000 is available in English .

Is your question not listed? Ask your question here

No results