Casio WV58DA-1AV manual

Casio WV58DA-1AV
(1)
  • Number of pages: 5
  • Filetype: PDF

Operation Guide 3054

1
MO0606-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Caution!
Your watch is shipped with it Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.
Countdown Timer Mode
Stopwatch ModeAlarm Mode
Timekeeping Mode
Press C.
World Time Mode

General Guide

Press C to change from mode to mode.
In any mode (except when a setting screen is on the display), press B to illuminate
the display.

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates
its time setting accordingly.
Supported time calibration signals: United States (Fort
Collins), England (Rugby).
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
The first thing you should do after purchasing this watch
is to specify your Home City (the city where you
normally will use the watch). For more information, see
“To specify your Home City”.
PM
indicator
Month Day
Year
Day of week
Home Time
(Hour : Minutes Seconds)
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See Timekeeping
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term North America in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
To specify your Home City
1. In the Timekeeping Mode, hold down A until the city
code starts to flash, which indicates the setting screen.
2. Press D(east) and B(west) to select the city code you
want to use as your Home City.
Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
l
l
l
l
l
l
l
l
l
l
l
City code

U.S. Signal U.K. Signal

City
Code
LIS
LON
MAD
PAR
ROM
BER
STO
City
Name

Lisbon

London

Madrid

Paris

Rome

Berlin

Stockholm

City
Code
ATH
MOW
City
Name

Athens

Moscow

City
Code
HNL
ANC
YVR
LAX
YEA
DEN
MEX
City
Name

Honolulu

Anchorage

Vancouver

Los Angeles

Edmonton

Denver

Mexico City

City
Code
YWG
CHI
MIA
YTO
NYC
YHZ
YYT
City
Name

Winnipeg

Chicago

Miami

Toronto

New York

Halifax

St. Johns

3. Press A to exit the setting screen.
Important!
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see Home
City Codes and Transmitters.
Under factory default settings, auto receive is turned off for all of the following city
codes: HNL (Honolulu), ANC (Anchorage), ATH (Athens), and MOW (Moscow). For
details about turning on auto receive for these city codes, see To turn auto receive
on and off.
You can disable time signal reception, if you want. See To turn auto receive on and
off for more information.
See the maps under Reception Ranges for information about the reception ranges
of the watch.
If you are in an area that does not use Daylight Saving Time (summertime), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see About Auto Receive.
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see To perform manual receive.
Important!
When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 o'clock side facing towards a window.
Make sure there are no metal objects nearby.

12 oclock

or
Make sure the watch is facing the right way.
Proper signal reception can be difficult or even impossible under the conditions listed
below.
Signal reception normally is better at night than during the day.
Time calibration signal reception takes from two to seven minutes, but in some
cases it can take as long as 14 minutes. Take care that you do not perform any
button operations or move the watch during this time.

Inside or

among

buildings

Inside a

vehicle

Near

household

appliances,

office

equipment,

or a mobile

phone

Near a

construction

site, airport,

or other

sources of

electrical

noise

Near high-

tension

power lines

Among or

behind

mountains

The time calibration signal the watch will attempt to pick up depends on its current
Home City code setting as shown below.
Home City Code
HNL*, ANC*, YVR,
LAX, YEA, DEN, MEX,
YWG, CHI, MIA, YTO,
NYC,YHZ, YYT
LIS, LON,
MAD, PAR, ROM, BER,
STO, ATH*, MOW*
Frequency
60.0 kHz
60.0 kHz
Transmitter
Fort Collins, Colorado
(the United States)
Rugby (England)
Home City Codes and Transmitters
* The areas covered by the HNL, ANC, ATH, and MOW city codes are quite far from
the time calibration signal transmitters, and so certain conditions may cause
problems with signal reception.
Reception Ranges

Rugby

500 kilometers

U.K. Signal

1,500 kilometers

Fort Collins

600 miles

(1,000 kilometers)

U.S. Signal

2,000 miles

(3,000 kilometers)

Casio WV58DA-1AV

Need help?

Number of questions: 0

Do you have a question about the Casio WV58DA-1AV or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio WV58DA-1AV owners to properly answer your question.

View the manual for the Casio WV58DA-1AV here, for free. This manual comes under the category Watches and has been rated by 1 people with an average of a 9.7. This manual is available in the following languages: English. Do you have a question about the Casio WV58DA-1AV or do you need help? Ask your question here

Casio WV58DA-1AV specifications

General
Brand Casio
Model WV58DA-1AV
Product Watch
EAN 79767726409, 853585303529, 940356559084
Language English
Filetype PDF
Technical details
Mechanism type Electronic
Watch dial type LED dial
Waterproof
Water resistant depth 50 m
Shockproof
Chronograph
Stopwatch
World time function
Timer Countdown
Alarm function
Calendar
LED backlight
Accuracy +/-20 sec/month
Clock mode 12h/24h
Radio signal receiver WWVB, MSF
Watch type Wrist watch
Calendar type Day
Design
Watch case material Metal
Housing colour Silver
Band material Metal
Band main colour Silver
Watch glass type -
Case shape Round
Watch dial main colour -
Watch marker style Roman numerals
Product design Casual
Gender Male
Power
Battery life 2 year(s)
Weight & dimensions
Width 51.5 mm
Depth 11 mm
Height 42 mm
Weight 97 g
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Casio WV58DA-1AV.

Is your question not listed? Ask your question here