ANC (Anchorage). For details about turning on auto receive for these city codes, see
“To turn auto receive on and off”.
•You can disable time signal reception, if you want. See “To turn auto receive on and
off” for more information.
•See the maps under “Reception Ranges” for information about the reception ranges
of the watch.
•If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see “About Auto Receive”.
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see “To perform manual receive”.
•When getting ready to receive the time calibration signal, position the watch as
shown in the nearby illustration, with its 12 o’clock side facing towards a window.
Make sure there are no metal objects nearby.
•Make sure the watch is facing the right way.
•Proper signal reception can be difficult or even impossible under the conditions listed
•Signal reception normally is better at night than during the day.
•Time calibration signal reception takes from two to seven minutes, but in some
cases it can take as long as 14 minutes. Take care that you do not perform any
button operations or move the watch during this time.
or a mobile
•The time calibration signal the watch will attempt to pick up depends on its current
Home City code setting as shown below. If you use the watch in Japan or Europe
(each of which has two different transmitter locations), it will try to receive the time
calibration signal from one of the transmitters in your current location. If it cannot
receive the signal, it will then try to receive the time calibration signal from the other
Home City Code
MAD, PAR, ROM, BER,
STO, ATH, MOW*
HKG*, BJS*, TPE,
HNL*, ANC*, YVR,
LAX, YEA, DEN, MEX,
YWG, CHI, MIA, YTO,
Fort Collins, Colorado
(the United States)
Home City Codes and Transmitters
* The areas covered by the MOW, HKG, BJS, HNL, and ANC city codes are quite
far from the time calibration signal transmitters, and so certain conditions may
cause problems with signal reception.
View the manual for the Casio WV-58DE-1AVEG here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Casio WV-58DE-1AVEG or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio WV-58DE-1AVEG below.
What is the weight of the Casio WV-58DE-1AVEG?
The Casio WV-58DE-1AVEG has a weight of 87.2 g.
A battery in my watch has started to corrode. Is the device still safe to use?
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
What is the height of the Casio WV-58DE-1AVEG?
The Casio WV-58DE-1AVEG has a height of 53.4 mm.
What is the width of the Casio WV-58DE-1AVEG?
The Casio WV-58DE-1AVEG has a width of 43.7 mm.
What is the depth of the Casio WV-58DE-1AVEG?
The Casio WV-58DE-1AVEG has a depth of 12 mm.
Is the manual of the Casio WV-58DE-1AVEG available in English?
Yes, the manual of the Casio WV-58DE-1AVEG is available in English .
Do you have a question about the Casio and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Casio owners to provide you with a good answer.
Number of questions: 0