Casio Waveceptor WV200A-1AV manual

Casio Waveceptor WV200A-1AV
7.8 · 8
PDF manual
 · 5 pages
English
manualCasio Waveceptor WV200A-1AV

Operation Guide 3140

4

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.
When setting the time, you can also con gure settings for the City Code, the DST
setting, the 12/24-Hour Format, Year, Month, Day, the Language setting, and the
Month/Day display format.
Pressing
D
in the Timekeeping Mode will display the Last Signal screen.
Current Time and Date Screen Last Signal Screen
Dayofweek
Home Time
(Hour : Minutes Seconds)
Month Day
Receive time
Receive date
Year
PM indicator
DST indicator
Press .
Note
This watch is capable of displaying text for the day of the week in any one of
nine different languages (English, Spanish, French, Portuguese, German, Italian,
Chinese, Russian, and Japanese).
Setting the Time and Date
Make sure you select your Home City code before you change the current time
and date settings. World Time Mode times are all displayed in accordance with the
Timekeeping Mode settings. Because of this, World Time Mode times will not be
correct if you do not select the proper Home City code before setting the time and
date in the Timekeeping Mode.
To set the time and date
1. In the Timekeeping Mode, hold down
A
until the city
code starts to ash, which indicates the setting screen.
2. Press
C
to change the ashing contents in the
sequence shown below to select other settings.
City code

Reference

This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto Display
Auto Display continually changes the contents of the digital display.
To turn off Auto Display
Press any button to turn off Auto Display. This returns to the Timekeeping Mode.
To turn on Auto Display
In the Timekeeping Mode, while holding down
B
, hold down
D
for about two
seconds until the watch beeps.
Note
Calibration signal reception is disabled while Auto Display is being performed.
Auto Display cannot be performed while a setting screen is on the display.
Button Operation Tone
The button operation tone sounds any time you press one
of the watchs buttons. You can turn the button operation
tone on or off as desired.
Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down
C
to toggle the button operation tone
on ( MUTE not displayed) and off ( MUTE displayed).
Since the
C
button is also the mode change button, holding it down to turn the
button operation tone on or off also causes the watchs current mode to change.
The MUTE indicator is displayed in all modes when the button operation tone is
turned off.
Auto Return Features
If you leave the watch with the Last Signal screen in the Timekeeping Mode for one
or two minutes without performing any operation, it returns to the Current Time and
Date screen in the Timekeeping Mode automatically.
If you leave the watch in the Alarm Mode for two or three minutes without performing
any operation, it returns to the Timekeeping Mode automatically.
If you leave the watch with a ashing setting on the display for two or three minutes
without performing any operation, the watch exits the setting screen automatically.
Scrolling
The
B
and
D
buttons are used in various modes and setting screens to scroll
through data. In most cases, holding down these buttons during a scroll operation
scrolls through the data at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when
you last exited the mode appears rst.
Radio-controlled Atomic Timekeeping Precautions
The display of the watch is blank while an auto receive operation is in progress.
Strong electrostatic charge can result in the wrong time being set.
The time calibration signal is bounced off the ionosphere. Because of this, such
factors as changes in the re ectivity of the ionosphere, as well as movement of the
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day may change the reception range of the signal and make reception temporarily
impossible.
Even if the time calibration signal is received properly, certain conditions can cause
the time setting to be off by up to one second.
The current time setting in accordance with the time calibration signal takes priority
over any time settings you make.
The watch is designed to update the date and day of the week automatically for
the period January 1, 2000 to December 31, 2099. Setting of the date by a time
calibration signal cannot be performed starting from January 1, 2100.
This watch can receive signals that differentiate between leap years and non-leap
years.
Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
Normally, the signal reception date shown by the Last Signal screen is the date data
included in the received time calibration signal. When only time data is received,
however, the Last Signal screen shows the date as kept in the Timekeeping Mode at
the time of signal reception.
If you are in an area where proper time calibration signal reception is impossible, the
watch keeps time with the precision noted in Speci cations.
If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your current city code, DST (summer
time), and auto receive settings. The following are the initial factory defaults for
these settings.
Setting Initial Factory Default
City code
(New York)
DST (summer time)
(Auto switching)
Auto receive (Auto receive)
Timekeeping
Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
The day of the week is displayed automatically in accordance with the date (year,
month, and day) settings.
The year can be set in the range of 2000 to 2099.
The watchs built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except after you have the watchs battery replaced.
The times for the Timekeeping Mode and all the city codes of the World Time Mode
are calculated in accordance with each citys UTC offset.
The UTC offset is a value that indicates the time difference between a reference
point in Greenwich, England and the time zone where a city is located.
The letters UTC is the abbreviation for Coordinated Universal Time, which is the
world-wide scienti c standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the Earths
rotation.
MUTE indicator
DST
City
Code
Seconds
12/24-Hour
Format
Minutes
Day
Month/Day
Display Format
Month
Language
Yea r
Hour
3. When the setting you want to change is ashing, use
B
and/or
D
to change it as
described below.
Screen: To do this: Do this:
Change the city code
Use
D
(east) and
B
(west).
Cycle between auto DST ( ),
Standard Time ( ), and Daylight
Saving Time ( )
Press
D
.
Toggle between 12-hour (
12H
) and
24-hour (
24H
) timekeeping
Press
D
.
Reset the seconds to Press
D
.
Change the hour, minutes, or year
Use
D
(+) and
B
().
Change the month or day
Change the language
ENG
: English
ESP
: Spanish
FRA
: French
POR
: Portuguese
DEU
: German
ITA
: Italian
CHN
: Chinese
: Russian
JPN
:
Japanese
Russian
Use
D
and
B
.
Toggle the month/day display format between
month/day (M/D) and day/month (D/M).
Press
D
.
See the City Code Table for a complete list of available city codes.
See the Day of the Week List for information on abbreviations used.
Auto DST (
) can be selected only while HNL , ANC , YVR , LAX , YEA ,
DEN , MEX , YWG , CHI , MIA , YTO , NYC , YHZ , YYT , LIS , LON , MAD , PAR ,
ROM , BER , STO , ATH , or MOW is selected as the Home City code. For more
information, see Daylight Saving Time (DST) below.
4. Press
A
to exit the setting screen.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
The time calibration signals transmitted from Fort Collins (the United States) or
Anthorn (England) includes both Standard Time and DST data. When the Auto DST
setting is turned on, the watch switches between Standard Time and DST (summer
time) automatically in accordance with the received time signal.
The default DST setting is Auto DST (
) whenever you select ANC , YVR ,
LAX , YEA , DEN , MEX , YWG , CHI , MIA , YTO , NYC , YHZ , YYT , LIS , LON , MAD ,
PAR , ROM , BER , STO , ATH , or MOW as your Home City code.
If you experience problems receiving the time calibration signal in your area, it
probably is best to switch between Standard Time and Daylight Saving Time (summer
time) manually.
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down
A
until the city code starts to ash, which
indicates the setting screen.
2. Press
C
and the DST setting screen appears.
3. Use
D
to cycle through the DST settings in the sequence shown below.
Auto DST
()
DST on
()
DST off
()
4. When the setting you want is selected, press
A
to exit the setting screen.
The DST indicator appears to indicate that Daylight Saving Time is turned on.

View the manual for the Casio Waveceptor WV200A-1AV here, for free. This manual comes under the category sport watches and has been rated by 8 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Casio Waveceptor WV200A-1AV or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 24
R
Rick BurdettAugust 19, 2021

My watch has been in a drawer for a year and appears dead. How can I restore it?

2 comments
E
Emma of manua.lsOctober 25, 2023

To restore your Casio Waveceptor WV200A-1AV watch after it has been in a drawer for a year and appears dead, follow these steps: 1. Press and hold the A button in the Timekeeping Mode until the city code starts to flash, indicating the setting screen. 2. Press the C button to navigate to the DST (Daylight Saving Time) setting screen. 3. Use the D button to cycle through the DST settings. Select "DST off" to disable Daylight Saving Time. 4. Press the A button to exit the setting screen.

This answer is automatically generated
F
Frank October 7, 2023

This just happened to me, but mine had been unused for several years. I simply replaced the battery (app $3 at Amazon). Now, I'm going through the process of setting the time and date.

J
John Beals September 13, 2021

How do I set the count down timer to the amount of time I want to count down from?

B
Bernard DurackOctober 13, 2022

My analog time has become 5 minutes slower than the real digital time. Can it be corrected please ?

My analog time has become 5 minutes slower than the real digital time. Can it be corrected please ?
zoom-in
View photo
I
IanApril 4, 2024

how can I adjust the hand setting, the analog time is 1 minute behind the digital. Thankyou Ian

J
Jeff CosterJuly 7, 2022

What kind of battery does a Casio 3140 wv_200a

What kind of battery does a Casio 3140 wv_200a
zoom-in
View photo
J
jJoseph CHAGOURYSeptember 4, 2022

how do i change the time format from 24 hours to 12 hours format

D
Dr Leo LeungSeptember 30, 2022

if this watch will not charge what can I do...battery replacement?

H
Harold H. Yearwood, IINovember 28, 2022

What battery do I need for my Wave Ceptor Illuminator WV-200A watch?

1 comment
F
FrankOctober 7, 2023

CR-1620

L
LoApril 25, 2019

How do I fix year on Casio waveceptor 200a

The Casio Waveceptor WV200A-1AV is a sport watch that offers a range of practical features for active individuals. With its waterproof design and water resistant depth of 200 meters, this watch can withstand water pressure and is suitable for swimming, snorkeling, and other water activities. The watch includes a calendar function, allowing users to keep track of dates and appointments. It also offers a clock mode in both 12-hour and 24-hour formats, providing flexibility for personal preference. A stopwatch function is available, which is useful for timing activities and workouts. This allows users to measure their performance or monitor their progress during exercise sessions. With its world time function, the Casio Waveceptor WV200A-1AV enables users to keep track of different time zones. This can be helpful for travelers or individuals who need to coordinate with people in different parts of the world. The watch has dimensions of 48.3 x 39 x 12.5 millimeters, making it compact and comfortable to wear. Weighing only 40 grams, it is lightweight and won't be burdensome during physical activities. The band material is made of resin, which offers durability and resistance to wear and tear. The watch features an LCD dial, providing clear and easy-to-read information. The Casio Waveceptor WV200A-1AV operates on a CR1620 battery, ensuring long-lasting power for extended use. In summary, the Casio Waveceptor WV200A-1AV is a practical and reliable sport watch with a range of features, including waterproof capability, a calendar, clock modes, stopwatch function, world time function, and a durable resin band. Its compact size and lightweight design make it a convenient accessory for active individuals.

General
BrandCasio
ModelWaveceptor WV200A-1AV | WV200A-1AV
Productsport watch
EAN630219282814, 79767898281, 0630219282814, 0797678982812, 0079767898281
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
WaterproofYes
200 m
CalendarYes
Clock mode12h/24h
StopwatchYes
Accuracy+/- 20 sec/month
World time functionYes
Watch dial typeLCD dial
Other features
Dimensions (WxDxH)48.3 x 39 x 12.5 mm
Product colorBlack
Weight & dimensions
Weight40 g
Design
Band materialResin
Power
Battery typeCR1620
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Waveceptor WV200A-1AV below.

What is the weight of the Casio Waveceptor WV200A-1AV?

The Casio Waveceptor WV200A-1AV has a weight of 40 g.

Do I need to switch off my sport watch at night?

It is sensible for you to switch off your sport watch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

How high is an adult's heart rate at rest?

An adult's resting heart rate is between 60 and 100 beats per minute.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time and date on my Casio Waveceptor WV200A-1AV?

To set the time and date on your watch, press and hold the "Adjust" button until the time starts flashing. Use the "Forward" and "Back" buttons to adjust the time, and press "Adjust" again to move to the date setting. Repeat the same process to set the date.

My watch is not receiving the radio signal to automatically update the time. What should I do?

First, ensure that you are in an open area with good reception. Then, press and hold the "Adjust" button to enter the time-setting mode. Look for the "RX-Signal" display and press the "Forward" button to initiate the radio signal reception manually. Keep the watch still until the signal is received.

The display on my watch is too dim. Can I adjust the brightness?

Yes, you can adjust the brightness of your watch's display. Press and hold the "Forward" button to enter the brightness adjustment mode. Use the "Forward" and "Back" buttons to toggle between brightness levels. Once you've selected the desired brightness level, simply wait for a few seconds for the change to be saved.

How do I use the stopwatch function on my Casio Waveceptor WV200A-1AV?

To use the stopwatch function, press the "Mode" button until the watch enters the "STW" mode. Press the "Start/Stop" button to begin timing, and press it again to stop. To reset the stopwatch, press and hold the "Adjust" button.

How can I change the unit of measurement for the temperature display on my watch?

Changing the unit of measurement for the temperature display is quite easy. Press and hold the "Mode" button to enter the settings mode. Use the "Forward" button to navigate to the temperature settings, and then use the "Adjust" button to toggle between Celsius and Fahrenheit. Once you've selected your preferred unit, press "Mode" to exit the settings mode.

Is the Casio Waveceptor WV200A-1AV waterproof?

Yes, the Casio Waveceptor WV200A-1AV is waterproof. This means that it can be worn while swimming or diving.

Does the Casio Waveceptor WV200A-1AV have a calendar?

Yes, the Casio Waveceptor WV200A-1AV has a calendar. This allows the user to easily keep track of the date.

Can the clock mode of the Casio Waveceptor WV200A-1AV be set to 12h or 24h?

Yes, the clock mode of the Casio Waveceptor WV200A-1AV can be set to either 12h or 24h. This allows the user to choose their preferred time format.

Does the Casio Waveceptor WV200A-1AV have a stopwatch?

Yes, the Casio Waveceptor WV200A-1AV has a stopwatch. This allows the user to accurately measure time intervals.

Does the Casio Waveceptor WV200A-1AV have a world time function?

Yes, the Casio Waveceptor WV200A-1AV has a world time function. This allows the user to easily view the time in different time zones.

Is the manual of the Casio Waveceptor WV200A-1AV available in English?

Yes, the manual of the Casio Waveceptor WV200A-1AV is available in English .

Is your question not listed? Ask your question here

No results