Casio SPF-40-1VER manual

Casio SPF-40-1VER
(2)
  • Number of pages: 9
  • Filetype: PDF

2273-1

Module No. 2273

GETTING ACQUAINTED

Congratulations upon your selection of this CASIO watch. To get the most out
of your purchase, be sure to read this manual carefully and keep it on hand
for later reference when necessary.
Warning!
The measurement functions built into this watch are not intended for
taking measurements that require professional or industrial precision.
Values produced by this watch should be considered as reasonable
representations only.
When using this watch to take readings while boating or engaging in
any other activity during which losing your way can create a dangerous
or life-threatening situation, always be sure to use a second compass to
confirm direction readings.
The longitude, lunitidal interval, Moon phase indicator, and tide graph
data that appears on the display of this watch is not intended for
navigation purposes. Always use proper instruments and resources to
obtain data for navigation purposes.
This watch is not an instrument for calculating low tide and high tide
times. The Tide Graph of this watch is intended to provide a reasonable
approximation of tidal movements only.
CASIO COMPUTER CO., LTD. assumes no responsibility for any loss,
or any claims by third parties that may arise through the use of this
watch.
About This Manual
Button operations are indicated using the
letters shown in the illustration.
Each section of this manual provides you
with the information you need to perform
operations in each mode. Further details
and technical information can be found in
the “REFERENCE” section.
(Light)
Press D.
Timekeeping Mode
Alarm Mode
Countdown Timer/Stopwatch Mode
Sensor Mode
Digital Compass Mode
Barometer/
Thermometer Mode
Moon/Tide Mode
D
Press B or C.
Press D.
Press B to enter the Digital Compass Mode or C to enter the Barometer/
Thermometer Mode from the Timekeeping Mode or Countdown Timer/
Stopwatch Mode. To get to a sensor mode from the Moon/Tide or Alarm
Mode, you must go to the Timekeeping Mode first.
D
Press B or C.
Press D.
Press B. Press C.
D

GENERAL GUIDE

If the digital display of your watch is continuously changing, see
“Auto Display Function” for information on how to stop it.
The illustration below shows which buttons you need to press to navigate
between modes.

TIMEKEEPING

In addition to normal timekeeping, use the
Timekeeping Mode to set the current time and
date.
The Moon phase indicator shows the
current Moon phase.
The tide graph shows the current tidal
movements.
Important!
The watch cannot produce correct Moon
phase or tide graph data unless the
Timekeeping Mode current time and date
settings, as well as city data settings (GMT
differential, longitudes, and lunitidal interval)
are all correct.
Hour : Minutes
PM indicator
Seconds
Year Month Day
Day of week
Tide graph
Moon phase indicator
Having the batteries replaced causes the Timekeeping Modes time/date
and city data settings to revert to their initial factory default settings. Use
the following procedure to set the current time and date, and to make city
data settings.
To reset the seconds count to zero
1. In the Timekeeping Mode, hold down A until the seconds digits start to
flash, which indicates the setting screen.
2. Press E to reset the seconds count to
00.
Pressing E while the seconds count is in the range of 30 to 59 resets
the seconds to
00 and add 1 to the minutes. In the range of 00 to 29,
the minutes count is unchanged.
3. Press A twice to exit the setting screen.
Casio SPF-40-1VER

Need help?

Number of questions: 0

Do you have a question about the Casio SPF-40-1VER or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio SPF-40-1VER owners to properly answer your question.

View the manual for the Casio SPF-40-1VER here, for free. This manual comes under the category Watches and has been rated by 2 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Casio SPF-40-1VER or do you need help? Ask your question here

Casio SPF-40-1VER specifications

General
Brand Casio
Model SPF-40-1VER
Product Watch
EAN 4971850728351
Language English
Filetype PDF
Technical details
Mechanism type Quartz
Watch dial type Analog & LCD dial
Waterproof
Water resistant depth 100 m
Shockproof -
Chronograph -
Alarm function
Calendar
Accuracy 15 sec/month
Barometer
Thermometer
Electronic compass
Watch type Wrist watch
Calendar type Moon phase
Design
Watch case material -
Housing colour Blue
Band material Resin
Band main colour Blue
Watch glass type -
Case shape Round
Watch dial main colour Blue
Watch marker style Arabic numerals
Product design Sport
Gender Unisex
Power
Battery type SR927W
Battery life 1.5 year(s)
Number of batteries supported 4
Weight & dimensions
Width 53.8 mm
Depth 17.9 mm
Height 57 mm
Weight 74 g
show more

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Casio SPF-40-1VER.

Is your question not listed? Ask your question here