Casio SGW200-1V manual

Casio SGW200-1V
8.2 · 4
PDF manual
 · 5 pages
English
manualCasio SGW200-1V

Operation Guide 3166

1
MA0905-EB

Getting Acquainted

Thank you for purchasing this CASIO product. To ensure that it can provide you with
the years of service for which it is designed, be sure to read this manual carefully and
follow the instructions contained herein.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
damage or loss suffered by you or any third party arising through the use of this
product or its malfunction.
Low Battery Warning

If you use the light or alarms a number of times during
a short period, a R (recover) indicator will flash on the
display and the following operations become disabled as
the battery level recovers.
Pedometer functions
Alarm and hourly time signal
Illumination
Normal operation should return after the battery level
recovers, but if the R indicator appears frequently you
should have the watch’s battery replaced.
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need to perform operations in each
mode.

General Guide

Use
C
to navigate between modes.
Holding down
C
for about three seconds in any mode will return to the Timekeeping Mode.
Pressing
L
in any mode will illuminate the display.



  





Setting the Time and Date






Use the following procedure to set the current time and
date after having the watch’s battery replaced, etc. World
Time Mode times will not be displayed correctly unless
you configure your Home Time settings (the time in the
city where you normally will use the watch) correctly.
If you to use the watch in Japan, select TYO (Tokyo) as
your Home Time.
To set the time and date
1. In the Timekeeping Mode, hold down
A
for about two
seconds until the seconds digits start to flash. This is
the setting screen.












2. Use
C
to move the flashing to the time, date, or Home City setting as shown
above, and then use
D
(+) and
B
(−) to change the flashing setting.
Holding down
D
or
B
will change the selected setting at high speed.
Setting To do this: Do this:
Seconds Reset to 00 Press
D
.
Summer Time (DST)
Toggle between standard time (OFF) and
daylight saving time (ON)
Press
D
.
Home City
Change the Home City setting (See the
“City Code Table”.)
Use
D
(east) and
B
(west).
Hour, Minute Change the hour or minute setting Use
D
(+) and
B
(–).
12/24-hour Timekeeping
Toggle between 12-hour and 24-hour
timekeeping
Press
D
.
Year, Month, Day Change the year, month, or day setting Use
D
(+) and
B
(–).
3. After all of the settings are the way you want, press
A
twice to exit the setting
screen.
The watch also will exit the setting screen automatically if you do not perform any
operation for about two or three minutes.
When setting the hour, make sure you specify AM (no indicator) or PM (P) correctly,
or that you specify the correct 24-hour time.
Resetting the seconds to
00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
Resetting the zero count to zero on an accurate time signal about once a month
helps to ensure accurate timekeeping.
You can set a date in the range of January 1, 2000 to December 31, 2099.
The day of the week is set automatically in accordance with the date you set.
The watch makes adjustments for leap years and month lengths automatically.
Summer time, or Daylight Saving Time (DST) as is it is called in some countries,
calls for setting clocks ahead one hour during the summer season. Note that the use
of summer time depends on the country and even the local area.

Stopwatch

The Stopwatch Mode lets you measure elapsed time, and record lap/split times.
A sensor built into the watch counts your steps while a stopwatch elapsed time
operation is in progress. The watch uses this information to calculate the energy you
consume, the distance you cover, and your average pace in accordance with personal
information you pre-register.
For each elapsed time operation, the watch creates a record in memory to record the
date, lap/split times, distance covered, energy consumption, number of steps, and
other information.
Stopwatch
Minimum Measuring Unit: 1/100 second
Maximum Measuring Time: 99:59'59.99''
Lap/Split Count: 999
Elapsed Time Measurement
Workout Time
Distance Covered
Energy Consumption
Average Pace (*)
Number of Steps
Workout Data (Maximum Cumulative Values)
Laps/splits: 150
Cumulative Distance: 999.9 km/621.1 miles
Cumulative Energy Consumption: 23900.5kcal / 99999.9kJ
Average Pace: 220 (*)
Cumulative Number of Steps: 999999
Cumulative Exercise Time: 9999 hours, 59 minutes
Best Lap
* Average Pace
The average pace value shows your average number of steps per minute while
timing your run with the stopwatch.
When you take a lap reading, this value shows your average pace during that lap.
When you take a split reading, this value shows your average pace up to the current
split, starting from the start of your timed run.

View the manual for the Casio SGW200-1V here, for free. This manual comes under the category sport watches and has been rated by 4 people with an average of a 8.2. This manual is available in the following languages: English. Do you have a question about the Casio SGW200-1V or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Casio SGW200-1V is a sport watch with various features that cater to outdoor activities and water sports. With its waterproof capability, it allows users to wear it while swimming or participating in water-based activities. Additionally, its water resistance depth of 100 meters ensures it can withstand submersion without damage. The watch includes a countdown timer, which can be useful for tracking specific time intervals or activities. It also offers a calendar function, allowing users to stay organized and keep track of important dates. The clock mode provides the option to switch between a 12-hour or 24-hour display format, catering to individual preferences. For tracking time precisely, the Casio SGW200-1V is equipped with a stopwatch feature. This allows users to measure elapsed time accurately, making it convenient for various purposes, including sports training or timing events. Another notable feature of this watch is its world time function. This functionality enables users to easily access the current time of different time zones worldwide, making it suitable for travelers or individuals who frequently communicate with people in different regions. With dimensions of 51.6 x 44.2 x 13.6 millimeters and a weight of 47 grams, this sport watch offers a compact and lightweight design, making it comfortable to wear for extended periods. Its band is made of durable resin material, ensuring long-lasting use. The Casio SGW200-1V operates using a CR2025 battery, providing reliable power to keep the watch functioning. The watch dial displays information through an LCD dial for clear visibility in different lighting conditions. Overall, this sport watch offers a range of features suitable for outdoor enthusiasts and individuals seeking a reliable timekeeping device.

General
BrandCasio
ModelSGW200-1V | SGW200-1V
Productsport watch
EAN79767419059, 0079767419059, 0797674190594
LanguageEnglish
FiletypeUser manual (PDF)
Technical details
WaterproofYes
TimerCountdown
100 m
CalendarYes
Clock mode12h/24h
StopwatchYes
Accuracy+/-15 sec/month
World time functionYes
Watch dial typeLCD dial
Other features
Dimensions (WxDxH)51.6 x 44.2 x 13.6 mm
Product colorBlack
Weight & dimensions
Weight47 g
Design
Band materialResin
Power
Battery typeCR2025
show more

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio SGW200-1V below.

What is the weight of the Casio SGW200-1V?

The Casio SGW200-1V has a weight of 47 g.

Do I need to switch off my sport watch at night?

It is sensible for you to switch off your sport watch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

How high is an adult's heart rate at rest?

An adult's resting heart rate is between 60 and 100 beats per minute.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the Casio SGW200-1V waterproof?

Yes, the Casio SGW200-1V is waterproof. This means that the user can wear it while swimming or engaging in water sports without worrying about water damage to the watch.

Does the Casio SGW200-1V have a countdown timer?

Yes, the Casio SGW200-1V has a countdown timer. This feature allows the user to set a specific amount of time and be notified when it reaches zero, making it convenient for timing workouts or other activities.

Does the Casio SGW200-1V have a calendar?

Yes, the Casio SGW200-1V has a calendar. This is useful for keeping track of dates and appointments, providing an added convenience for users.

Can the Casio SGW200-1V display time in both 12-hour and 24-hour formats?

Yes, the Casio SGW200-1V can display time in both 12-hour and 24-hour formats. This allows users to choose their preferred time format, ensuring ease of use and personal preference.

Does the Casio SGW200-1V have a stopwatch function?

Yes, the Casio SGW200-1V has a stopwatch function. This feature is perfect for athletes or anyone who needs to track their performance or measure elapsed time accurately.

How do I turn on the backlight of the Casio SGW200-1V sport watch?

To turn on the backlight of the Casio SGW200-1V sport watch, follow these steps: 1. In any mode, press the L button. This will illuminate the display for about one second. 2. The backlight will allow you to easily read the display in the dark. Please note that the backlight will automatically turn off after about one second to conserve battery power. If you need to see the display for a longer period, you can press the L button again to re-illuminate the display. It's important to keep in mind that frequent use of the backlight may drain the battery faster. Additionally, the illumination may be harder to see under direct sunlight. If the backlight is not working, it could indicate a low battery level. In such cases, you may need to have the watch's battery replaced. Remember, pressing the L button will activate the backlight and provide temporary illumination for easy reading of the display.

Why is the backlight of my Casio SGW200-1V sport watch not working?

There could be several reasons why the backlight of your Casio SGW200-1V sport watch is not working. Here are some troubleshooting steps you can try: 1. Check the battery level: If the battery level is low, certain functions, including the backlight, may become disabled. Replace the battery if necessary. 2. Activate the backlight manually: In any mode, press the L button to turn on the backlight. The display should illuminate for about one second. If the backlight does not turn on, proceed to the next step. 3. Check for any obstructions: Make sure there are no obstructions blocking the light sensor on the watch. Clean the sensor gently with a soft cloth if needed. 4. Reset the watch: Sometimes, a simple reset can resolve issues with the backlight. To reset the watch, press and hold the A button for a few seconds until the display resets. 5. Seek professional assistance: If none of the above steps resolve the issue, it is recommended to contact a Casio service center or authorized dealer for further assistance and possible repairs. Remember, these troubleshooting steps are provided as a general guide and may vary depending on the specific issue with your watch.

How do I change the battery of the Casio SGW200-1V sport watch?

To change the battery of the Casio SGW200-1V sport watch, follow these steps: 1. Ensure you have a replacement battery that is compatible with the watch model. Refer to the watch's specifications or consult a professional if you are unsure. 2. Prepare a clean and well-lit workspace to avoid losing any small components during the battery replacement process. 3. Use a small screwdriver to remove the screws on the back cover of the watch. Keep the screws in a safe place. 4. Carefully remove the back cover to access the battery compartment. Take note of the battery's orientation before removing it. 5. Gently remove the old battery from the compartment using a pair of tweezers or a non-metallic tool. Avoid touching the battery terminals with your fingers. 6. Insert the new battery into the compartment, ensuring it is properly aligned with the correct polarity (+/-). 7. Replace the back cover and secure it with the screws you removed earlier. Make sure the cover is tightly sealed to maintain the watch's water resistance. 8. Test the watch by pressing any button to check if the display and functions are working properly. If you encounter any difficulties or have concerns about the battery replacement process, it is recommended to seek assistance from a professional watch technician or contact Casio customer support.

Why is the time and date on my Casio SGW200-1V sport watch not accurate?

The time and date on your Casio SGW200-1V sport watch may not be accurate due to the following reasons: 1. Low battery: If the battery level is low, it can affect the accuracy of the timekeeping function. Consider replacing the battery if it is depleted. 2. Incorrect time zone setting: Ensure that the Home City setting is correctly configured to your local time zone. Use the D (+) and B (-) buttons to adjust the setting. 3. Daylight Saving Time (DST): If your region observes DST, make sure the DST setting is toggled correctly. Press the D button to switch between standard time (OFF) and daylight saving time (ON). 4. Manual time and date adjustment: If the watch has been reset or the battery has been replaced, you may need to manually set the time and date. Enter the Timekeeping Mode by pressing and holding the A button, then use the C button to navigate to the time and date settings. Use the D (+) and B (-) buttons to adjust the values. 5. Signal interference: Strong magnetic fields or electronic devices near the watch can interfere with the timekeeping function. Keep the watch away from such sources of interference. If the issue persists or you require further assistance, it is recommended to contact a Casio service center or authorized dealer for professional support.

How do I reset the step count on my Casio SGW200-1V sport watch?

To reset the step count on your Casio SGW200-1V sport watch, follow these steps: 1. Enter the Step Count Mode by pressing the C button repeatedly until the step count is displayed. 2. Press and hold the A button for about two seconds until the display flashes. This indicates that you are in the step count reset mode. 3. While in the reset mode, press the D button to reset the step count to zero. 4. Once the step count is reset, the display will stop flashing, and the watch will emit a beep to confirm the reset. Please note that resetting the step count will permanently delete the recorded step data. Make sure you have synchronized or recorded any important data before performing the reset. If you encounter any difficulties or have further questions regarding the step count reset process, it is recommended to consult the Casio customer support or refer to the user manual for additional guidance.

Is the manual of the Casio SGW200-1V available in English?

Yes, the manual of the Casio SGW200-1V is available in English .

Is your question not listed? Ask your question here

No results