Casio SGW-500H-1BVER manual

Casio SGW-500H-1BVER
(4)
  • Number of pages: 9
  • Filetype: PDF
  • MO1208-EA

    © 2012 CASIO COMPUTER CO., LTD.

    E-1

    ENGLISH

    Congratulations upon your selection of this CASIO watch.
    Warning!
    The measurement functions built into this watch are not intended for taking
    measurements that require professional or industrial precision. Values produced
    by this watch should be considered as reasonable representations only.
    Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any
    damage or loss suffered by you or any third party arising through the use of
    this product or its malfunction.
    E-2
    To ensure correct direction readings by this watch, be sure to perform
    bidirectional calibration before using it. The watch may produce incorrect
    direction readings if you do not perform bidirectional calibration. For more
    information, see “To perform bidirectional calibration” (page E-36).
    Keep the watch away from audio speakers, magnetic necklace, cell phone,
    and other devices that generate strong magnetism. Exposure to strong
    magnetism can magnetize the watch and cause incorrect direction readings. If
    incorrect readings continue even after you perform bidirectional calibration, it
    could mean that your watch has been magnetized. If this happens, contact
    your original retailer or an authorized CASIO Service Center.
    E-3

    About This Manual

    Depending on the model of your watch, digital display
    text appears either as dark fi gures on a light
    background, or light fi gures on a dark background. All
    sample displays in this manual are shown using dark
    gures on a light background.
    Button operations are indicated using the letters shown
    in the illustration.
    Note that the product illustrations in this manual are
    intended for reference only, and so the actual product
    may appear somewhat different than depicted by an
    illustration.
    E-4

    Things to check before using the watch

    1. Check the Home City and the daylight saving time (DST) setting.
    Use the procedure under “Confi guring Home City Settings” (page E-17) to confi gure
    your Home City and daylight saving time settings.
    Important!
    Proper World Time Mode, Sunrise/Sunset Mode, and Moon Age Mode data depend
    on correct Home City, time, and date settings in the Timekeeping Mode. Make sure
    you confi gure these settings correctly.
    2. Confi gure latitude and longitude settings for your current location.
    See “To select a Home City by confi guring latitude and longitude settings” (page
    E-20).
    E-5
    3. Set the current time.
    See “Confi guring Current Time and Date Settings” (page E-22).
    The watch is now ready for use.
    E-6

    Contents

    E-3 About This Manual
    E-4 Things to check before using the watch
    E-11 Mode Reference Guide
    E-16 Timekeeping
    E-17 Confi guring Home City Settings
    E-17 To confi gure Home City settings
    E-19 To change the Daylight Saving Time (summer time) setting
    E-20 Confi guring Latitude and Longitude Settings for Your Current Location
    E-20 To select a Home City by confi guring latitude and longitude settings
    E-22 Confi guring Current Time and Date Settings
    E-22 To change the current time and date settings
    E-7
    E-26 Hand Home Position Adjustment
    E-26 To adjust home positions
    E-29 Taking Direction Readings
    E-30 To take a direction reading
    E-36 To perform bidirectional calibration
    E-38 To perform magnetic declination correction
    E-43 Thermometer
    E-43 To enter and exit the Thermometer Mode
    E-45 To correct the temperature value
    E-47 Specifying Temperature Unit
    E-47 To specify the temperature unit
    E-49 Looking up Sunrise and Sunset Times
    E-49 To look up the sunrise and sunset times on a specifi c date
    E-50 To toggle between sunrise time and sunset time
    E-51 To view the sunrise/sunset time for a particular date
    E-8
    E-52 Using Moon Data
    E-52 To look up the Moon age on a specifi c date
    E-54 Using the Alarm
    E-54 To enter the Alarm Mode
    E-55 To set an alarm time
    E-56 To test the alarm
    E-57 To turn an alarm and the Hourly Time Signal on and off
    E-57 To stop the alarm
    E-58 Using the Stopwatch
    E-58 To enter the Stopwatch Mode
    E-58 To perform an elapsed time operation
    E-58 To pause at a split time
    E-9
    E-60 Using the Countdown Timer
    E-60 To enter the Countdown Timer Mode
    E-60 To specify the countdown start time
    E-61 To perform a countdown timer operation
    E-62 To stop the alarm
    E-63 Checking the Current Time in a Different Time Zone
    E-63 To enter the World Time Mode
    E-64 To view the time in another time zone
    E-64 To specify standard time or daylight saving time (DST) for a city
    E-65 Illumination
    E-65 To turn on illumination
    E-66 To change the illumination duration
    E-68 Button Operation Tone
    E-68 To turn the button operation tone on and off

    Operation Guide 5269

Casio SGW-500H-1BVER

Need help?

Number of questions: 12

Do you have a question about the Casio SGW-500H-1BVER or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio SGW-500H-1BVER owners to properly answer your question.

Joe, 25-4-2021 14:34:57 No comments

Batteries replaced. Analog hands won't reset, how can I reset hands. Digital time and city ok.

Batteries replaced. Analog hands won't reset, how can I reset hands. Digital time and city ok.
Answer this question
Milton Torres, 23-10-2020 21:26:43 No comments

Cuando presenta una batería destellando en la pantalla digital no funcionan todas sus funciones y se debe reemplazar la batería? Que batería debería utilizar? Gracias.

Cuando presenta una batería destellando en la pantalla digital no funcionan todas sus funciones y se debe reemplazar la bater...
Answer this question
george, 19-12-2015 10:05:13 No comments

How do i synchronise the analog clock with the digital one.my analog clock is an hour and fifteen minutes ahead.please assist.

Answer this question
Rick, 29-12-2019 05:22:39 1 comment

I am setting time correctly, but the hands do not correspond with the time I am setting.

edi, 4-5-2020 06:06:24

you need to do "hand home position adjustment" part

Answer this question
ALFRED NARH, 31-3-2021 11:15:22 No comments

Please after changing the batteries of my watch can you help me settup the time

Answer this question
Martin Earl, 4-1-2021 19:25:22 1 comment

When I press A to reset the time as it is incorrect, the adjust display does not come up, instead the hands either go forward or back one hour

ravi kudur, 24-2-2021 15:14:16

When I press A to reset the time as it is incorrect, the adjust display does not come up, instead the hands either go forward or back one hour. please email a manual for 52269 sgw - 500h please

Answer this question
Jeff Minton , 8-7-2020 01:51:50 No comments

What battery does Casio SGW500H use?

Answer this question
H.R.Charboneau, 27-3-2020 23:37:44 No comments

How do you change the time

Answer this question
Kostass, 20-6-2017 20:10:40 No comments

Πώς ρυθμίζεται το αναλογικό με το ψηφιακό

Answer this question
Κωστας, 26-5-2017 15:31:46 No comments

Πώς συνχρονηζω το αναλογικό να είναι ίδιο με το ηλεκτρονικό

Answer this question

View the manual for the Casio SGW-500H-1BVER here, for free. This manual comes under the category Watches and has been rated by 4 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Casio SGW-500H-1BVER or do you need help? Ask your question here

Casio SGW-500H-1BVER specifications

General
Brand Casio
Model SGW-500H-1BVER
Product Watch
EAN 4971850975939
Language English
Filetype PDF
Technical details
Mechanism type -
Chronograph
Watch dial type Analog & LCD dial
Waterproof
Water resistant pressure 10 ATM
Water resistant depth 100 m
Shockproof -
World time function
Alarm function
Calendar
LED backlight
Accuracy 30 sec/month
Thermometer
Clock mode 12h/24h
Electronic compass
Watch type Bracelet watch
Calendar type Date
Design
Watch case material Resin
Housing colour Black
Band material Resin
Band main colour Black
Watch glass type Mineral
Case shape Round
Watch dial main colour Black
Watch marker style Non numeral
Product design -
Gender Male
Power
Battery type SR927W
Battery life 2 year(s)
Number of batteries supported 2
Weight & dimensions
Width 46.8 mm
Depth 13.6 mm
Height 49.6 mm
Weight 51 g

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Casio SGW-500H-1BVER.

Is your question not listed? Ask your question here