Casio Radio Controlled WV-200DE-1AVER manual

Casio Radio Controlled WV-200DE-1AVER
(1)
  • Number of pages: 5
  • Filetype: PDF

Operation Guide 3139

1
MA0807-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.
Caution!
Your watch is shipped with its Auto Display feature (which continually changes the
contents of the digital display) turned on. Calibration signal reception is disabled while
Auto Display is turned on.
Press any button to turn off Auto Display and return to the Timekeeping Mode.
About This Manual
Button operations are indicated using the letters shown
in the illustration.
Each section of this manual provides you with the
information you need in order to perform operations in
each mode. Further details and technical information
can be found in the “Reference” section.

General Guide

Press
C
to change from mode to mode.
In any mode (except when a setting screen is on the display), press
B
to illuminate the display.
Timekeeping Mode World Time Mode Countdown
Timer Mode
Alarm ModeStopwatch Mode
Press .

Radio-controlled Atomic Timekeeping

Day of week
Year
Home Time
(Hour : Minutes Seconds)
Month Day
PM indicator
DST
indicator
This watch receives a time calibration signal and updates
its time setting accordingly.
Supported time calibration signals: Germany (Mainfl ingen),
England (Anthorn), United States (Fort Collins), Japan.
See the information under “Signal Reception
Troubleshooting” if you experience problems with time
calibration signal reception.
Current Time Setting
This watch adjusts its time setting automatically in
accordance with a time calibration signal. You can also
perform a manual procedure to set the time and date,
when necessary.
The fi rst thing you should do after purchasing this
watch is to specify your Home City (the city where you
normally will use the watch). For more information,
see “To specify your Home City”.
When using the watch outside the areas covered by the time signal transmitters, you
will have to adjust the current time setting manually as required. See Timekeeping
for more information about manual time settings.
The U.S. time calibration signal can be picked up by the watch while in North
America. The term North America in this manual refers to the area that consists of
Canada, the continental United States, and Mexico.
To specify your Home City
City code
1. In the Timekeeping Mode, hold down
A
until the city
code starts to ash, which indicates the setting screen.
2. Press
D
(east) and
B
(west) to select the city code you
want to use as your Home City.
Time calibration signal reception is supported when
any one of the city codes shown in the table below is
selected as your Home City.
German/U.K. Signal Japan Signal U.S. Signal
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
City
Code
City
Name
LIS Lisbon ATH Athens HKG Hong Kong HNL Honolulu YWG Winnipeg
LON London MOW Moscow BJS Beijing ANC Anchorage CHI Chicago
MAD Madrid TPE Taipei YVR Vancouver MIA Miami
PAR Paris SEL Seoul LAX Los Angeles YTO Toronto
ROM Rome TYO Tokyo YEA Edmonton NYC New York
BER Berlin DEN Denver YHZ Halifax
STO Stockholm MEX Mexico City YYT St. Johns
3. Press
A
twice to exit the setting screen.
Important!
Normally, your watch should show the correct time as soon as you select your Home
City code. If it does not, it should adjust automatically after the next auto receive
operation (in the middle of the night). You can also perform manual receive or you
can set the time manually.
The watch will receive the time calibration signal automatically from the applicable
transmitter (in the middle of the night) and update its settings accordingly. For
information about the relationship between city codes and transmitters, see Home
City Codes and Transmitters.
Under factory default settings, auto receive is turned off for all of the following city
codes: HNL (Honolulu), ANC (Anchorage), MOW (Moscow), HKG (Hong Kong), and
BJS (Beijing). For details about turning on auto receive for these city codes, see To
turn auto receive on and off.
You can disable time signal reception, if you want. See To turn auto receive on and
off for more information.
See the maps under Approximate Reception Ranges for information about the
reception ranges of the watch.
If you are in an area that does not use Daylight Saving Time (summer time), turn off
the DST setting.
Time Calibration Signal Reception
There are two different methods you can use to receive the time calibration signal:
auto receive and manual receive.
Auto Receive
With auto receive, the watch receives the time calibration signal automatically up to
six times a day. When any auto receive is successful, the remaining auto receive
operations are not performed. For more information, see About Auto Receive.
Manual Receive
Manual receive lets you start a time calibration receive operation with the press of a
button. For more information, see To perform manual receive.
Casio Radio Controlled WV-200DE-1AVER

Need help?

Number of questions: 0

Do you have a question about the Casio Radio Controlled WV-200DE-1AVER or do you need help? Ask your question here. Provide a clear and comprehensive description of the issue and your question. The more detail you provide for your issue and question, the easier it will be for other Casio Radio Controlled WV-200DE-1AVER owners to properly answer your question.

View the manual for the Casio Radio Controlled WV-200DE-1AVER here, for free. This manual comes under the category Watches and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio Radio Controlled WV-200DE-1AVER or do you need help? Ask your question here

Casio Radio Controlled WV-200DE-1AVER specifications

General
Brand Casio
Model Radio Controlled WV-200DE-1AVER
Product Watch
Language English
Filetype PDF

Frequently Asked Questions

Below, you will find the most frequently asked questions about the Casio Radio Controlled WV-200DE-1AVER.

Is your question not listed? Ask your question here