Casio G-Shock MRG-G2000 manual

Casio G-Shock MRG-G2000
9.6 · 2
PDF manual
 · 26 pages
English
manualCasio G-Shock MRG-G2000
Stopping Radio Wave Emission by This
Watch
The watch is emitting radio waves whenever
the second hand is pointing to “C”.
Even if the second hand is not pointing at “C”,
the watch will automatically attempt to
connect with a phone four times a day to adjust
its time settings.
When in a hospital, on an aircraft, or in any
other area where the use of radio waves is not
allowed, use the operations below to stop
radio wave generation.
Stopping Radio Wave Generation
Press (C) to terminate the Bluetooth
connection.
30
30
After disconnectionConnected
Disabling Auto Time Adjustment
Configure MR-G Connected settings to
disable synchronization between the watch
and phone.
l
Using the Watch in a Medical Facility or
Aircraft

Copyrights and Registered

Copyrights

The Bluetooth
®
word mark and logos are
registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such
marks by CASIO Computer Co., Ltd. is
under license.
iPhone is a registered trademark of Apple
Inc. in the United States and other countries.
iOS is a trademark or registered trademark
of Cisco Systems, Inc.
GALAXY is a registered trademark of
Samsung Electronics Co., Ltd.
Android is a trademark or registered
trademark of Google Inc.
Other company names and product names
used herein are trademarks or registered
trademarks of their respective companies.

Troubleshooting

Signal Reception (GPS)

Q1
The watch cannot perform a receive
operation.
Is the watch’s battery charged?
Signal reception is not possible while
battery power is low. Keep the watch
exposed to light until it recharges
sufficiently.
l
Solar Charging
Is the watch in the Timekeeping Mode?
Signal reception is not possible unless the
watch is in the Timekeeping Mode. Note
that signal reception is also disabled in the
Airplane Mode. Return to the
Timekeeping Mode and/or exit the
Airplane Mode.
l
Navigating Between Modes
Is the watch connected with a phone?
Auto receive of signals by the watch is
disabled while it is connected with a
phone.
After checking the above, the watch still
cannot perform a receive operation.
GPS signal reception is not possible
under the conditions described below.
During power saving
While the crown is pulled out
Timer countdown operation in progress
Q2
The second hand remains at “T+P” or
“T(TIME)” during the signal receive
operation.
The watch may be receiving leap second
information.
l
Leap Second Reception
Q3
The signal receive operation always
fails.
Is the watch in a location that is appropriate
for signal reception?
Check your surroundings and move the
watch to a location where signal reception
is better.
l
Appropriate Signal Reception Location
Is the face of the watch pointed straight
upwards at the sky?
Minimize movement of the watch while the
receive operation is in progress.
When the watch is set up for auto receive,
take care to avoid covering the watch face
with the sleeve of your clothing.
An alarm started sounding while the
receive operation was in progress.
Receive stops if an alarm operation starts
while it is being performed. Disable the
alarm.
l
Enabling/Disabling the Alarm
Q4
Signal reception should have been
successful, but the watch’s time and/
or day is wrong.
Is your Home City setting correct for your
location?
Change your Home City setting so it
correctly reflects your location.
l
Acquiring GPS Position Information
Manually
l
Setting a Home Time City
Is the hand and/or day indicator alignment
correct?
Adjust hand and/or day indicator
alignment.
l
Adjusting Hand and Day Indicator
Alignment
After checking the above, the time and/or
day settings is still wrong.
Adjust time and day settings manually.

Operation Guide 5531

22

View the manual for the Casio G-Shock MRG-G2000 here, for free. This manual comes under the category smartwatch and has been rated by 2 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock MRG-G2000 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Casio G-Shock MRG-G2000 is a smartwatch designed for outdoor and sports enthusiasts. It features a rugged and durable design, with a stainless steel case and bracelet for added strength and reliability. The watch is equipped with a GPS function, allowing users to track their location and navigate through various outdoor activities. Additionally, it has Bluetooth connectivity for seamless pairing with smartphones for notifications and other smart features. The MRG-G2000 boasts water resistance up to 200 meters, making it suitable for water sports and activities. It also has a solar-powered battery that ensures long-lasting performance without the need for frequent recharging. The watch's digital display provides clear and easy-to-read information, even in bright sunlight. Overall, the Casio G-Shock MRG-G2000 is a reliable and functional smartwatch for users who require durability and advanced features in their outdoor adventures.

General
BrandCasio
ModelG-Shock MRG-G2000
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock MRG-G2000 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I perform basic operations on the Casio G-Shock MRG-G2000 smartwatch?

To perform basic operations on the Casio G-Shock MRG-G2000 smartwatch, follow these steps: 1. Familiarize yourself with the watch face items: - Day of the week: Indicates the current day of the week. - Airplane Mode mark: Indicates that the watch is in Airplane Mode. - Signal receive status, location information availability: Indicates the status of signal reception and location information. - Battery level: Indicates the current charge level of the watch. - Latitude: Indicates the rough latitude of the city for which location information was acquired. - Summer time setting: Indicates the summer time setting for the current Home City. - Bluetooth connection mark: Indicates a connection between the watch and a phone. - Alarm settings: Indicates if the alarm is enabled or disabled. - Time and signal reception marks: Indicate the progress of GPS signal reception and time adjustment operations. - Last signal receive result: Indicates the result of the last time adjustment operation. 2. Navigate between modes: - Use the (C) button to switch between modes. - Hold down (C) for at least one second to return to the Timekeeping Mode. - Hold down (C) for about 2.5 seconds to connect with a phone. These steps will help you get started with the basic operations of the Casio G-Shock MRG-G2000 smartwatch.

What should I do if the solar charging of the Casio G-Shock MRG-G2000 smartwatch is not working?

If the solar charging of the Casio G-Shock MRG-G2000 smartwatch is not working, follow these steps: 1. Ensure that the watch face (solar panel) is exposed to bright light when you are not wearing the watch. Avoid blocking the face with the sleeve of your clothing, as even partial blockage reduces power generation efficiency. 2. Check the charge level of the watch by pressing the (C) button to return to the Timekeeping Mode. The day of the week hand will indicate the battery charge level. If it shows "C" (Low Battery), the charge level is low. 3. If the charge level is low or the battery is dead, expose the watch face to light as soon as possible. This will initiate the charging process. Note that if the battery goes completely dead, the second hand will revolve counterclockwise until it stops at second 57, indicating that charging has started. 4. Avoid charging the watch under high-temperature conditions, such as on the dashboard of a vehicle parked in the sun or near a heat source. By following these steps, you can troubleshoot and address issues with the solar charging of the Casio G-Shock MRG-G2000 smartwatch.

How can I adjust the time on the Casio G-Shock MRG-G2000 smartwatch using GPS or the time calibration signal?

To adjust the time on the Casio G-Shock MRG-G2000 smartwatch using GPS or the time calibration signal, follow these steps: 1. Enter the Timekeeping Mode by pressing the (C) button. 2. Place the watch near a window or a location suitable for signal reception. 3. Wait for the watch to receive the time calibration signal. The second hand will point to "RC" during the reception process. 4. Once the reception is successful, the time and day settings will be adjusted automatically. Note: The reception process can take anywhere from two to ten minutes, and in some cases, up to 20 minutes. If GPS or time calibration signal reception is not possible, or if communication with a phone is not available, you can manually adjust the time settings using the following steps: 1. Pull out the crown to the second click. 2. Rotate the crown to change the World Time City. 3. Press the (A) button to confirm the selection. 4. Hold down the (A) button for about one second to change the summer time setting. 5. Push the crown back in to its normal position. By following these steps, you can adjust the time on the Casio G-Shock MRG-G2000 smartwatch using GPS or the time calibration signal, or manually if necessary.

What steps should I follow to connect the Casio G-Shock MRG-G2000 smartwatch with my mobile phone using Mobile Link?

To connect the Casio G-Shock MRG-G2000 smartwatch with your mobile phone using Mobile Link, follow these steps: 1. Open the Mobile Link app on your mobile phone. 2. On the watch, press and hold the (C) button for about 2.5 seconds until the second hand moves to "C" to establish a connection between the watch and the phone. 3. Follow the instructions displayed on the phone screen to complete the pairing process. If a pairing prompt message appears, perform the operation shown on the phone screen. 4. Once the pairing is successful, the watch will synchronize its time setting with the phone's time. The second hand will normally move to "Y(YES)" to indicate successful synchronization. Note: If the watch fails to synchronize the time with the phone, the second hand will move to "N" (NO). In such cases, you can manually adjust the hand and date indicator positions to correct the time. By following these steps, you can connect the Casio G-Shock MRG-G2000 smartwatch with your mobile phone using Mobile Link and synchronize the time between the two devices.

What should I do if I need to adjust the time settings on the Casio G-Shock MRG-G2000 smartwatch?

To adjust the time settings on the Casio G-Shock MRG-G2000 smartwatch, follow these steps: 1. Pull out the crown to the second click. This will display the current Home City on the indicator window. 2. Rotate the crown to change the World Time City. Select the desired city for your Home City. 3. Press the (A) button to confirm the selection. The current summer time setting will be displayed on the day of the week hand. 4. Hold down the (A) button for about one second to change the summer time setting. Each press of the (A) button will cycle through the options: "AT (AUTO)", "STD" (standard time), and "DST" (summer time). 5. Push the crown back in to its normal position. To adjust the time and day settings manually when GPS and time calibration signal reception is not possible, or when communication with a phone is not available, follow these steps: 1. Pull out the crown to the second click. 2. Rotate the crown to change the time and day settings. The settings will change in 15-minute increments. 3. Push the crown back in to complete the adjustment. By following these steps, you can easily adjust the time settings on the Casio G-Shock MRG-G2000 smartwatch.

Is the manual of the Casio G-Shock MRG-G2000 available in English?

Yes, the manual of the Casio G-Shock MRG-G2000 is available in English .

Is your question not listed? Ask your question here

No results