Casio G-Shock MRG-G2000 manual

Casio G-Shock MRG-G2000
9.6 · 2
PDF manual
 · 26 pages
English
manualCasio G-Shock MRG-G2000
Auto Time Calibration Signal
Receive
An automatic time calibration signal receive
operation is performed and the time and day
settings are adjusted between midnight and
5:00 a.m. Once a signal receive operation is
successful, no more auto receive operations
are performed that day.
Getting ready
Enter the Timekeeping Mode.
l
Navigating Between Modes
30
Place the watch near a window or some other
location appropriate for signal reception.
The second hand points to “RC” while time
calibration reception in progress.
When the receive operation is successful,
the time and day settings will be adjusted
automatically.
Note
Reception takes anywhere from
about two minutes to about 10
minutes. It can take as long as 20
minutes.

Signal Reception

Precautions

When the watch is unable to adjust its time
in accordance with a calibration signal for
some reason, average timekeeping
accuracy is within ±15 seconds per month.
Note that an internal decoding process the
watch performs after it receives a signal may
cause the time setting to be slightly off (by
less than one second).
GPS signal and time calibration signal
reception will not be possible under any of
the watch conditions described below.
While battery power is low
While the watch is in the Airplane Mode,
Stopwatch Mode, Timer Mode, or Alarm
Mode
When power saving is at Level 2 (GPS
signal reception also is not possible at
Level 1.)
While the crown is pulled out
Timer countdown operation in progress
If the receive operation is successful, the
time and day settings will be adjusted
automatically in accordance with the Home
City and summer time settings. Summer
time will not be applied correctly in the cases
described below.
When the summer time start date and
time, end date and time, or other rules are
changed by authorities
When location information is received,
but it is not location information for your
actual location (For example, when you
are near a borderline of a city and the
acquired location information is for a
neighboring city, etc.)
As of January 2017, China does not observe
summer time. If China starts to observe
summer time in the future, the time
displayed by the watch for China may not be
correct.

Using Mobile Link with

a Mobile Phone

While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically in
accordance with the phone’s time setting. You
can also change the watch’s time settings.
Note
This function is available only while
MR-G Connected is running on the
phone.
This section describes watch and
phone operations.
X : Watch operation
Y : Phone operation

Getting Ready

A Installing the Required App on
Your Phone
To use the watch with a phone, first tap one of
the links below and install the “MR-G
Connected” app on the phone.
iOS (iPhone) Users
https://itunes.apple.com/us/app/mr-g-
connected/id1179985537?mt=8
Android
TM
(GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.premium.mrg
B Configuring Bluetooth Settings
Enable the phone’s Bluetooth.
Note
For details about setting
procedures, see your phone
documentation.
C Pairing the Watch with a Phone
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y On the Home Screen, tap the “MR-G
Connected” icon.

Operation Guide 5531

10

View the manual for the Casio G-Shock MRG-G2000 here, for free. This manual comes under the category smartwatch and has been rated by 2 people with an average of a 9.6. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock MRG-G2000 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Casio G-Shock MRG-G2000 is a smartwatch designed for outdoor and sports enthusiasts. It features a rugged and durable design, with a stainless steel case and bracelet for added strength and reliability. The watch is equipped with a GPS function, allowing users to track their location and navigate through various outdoor activities. Additionally, it has Bluetooth connectivity for seamless pairing with smartphones for notifications and other smart features. The MRG-G2000 boasts water resistance up to 200 meters, making it suitable for water sports and activities. It also has a solar-powered battery that ensures long-lasting performance without the need for frequent recharging. The watch's digital display provides clear and easy-to-read information, even in bright sunlight. Overall, the Casio G-Shock MRG-G2000 is a reliable and functional smartwatch for users who require durability and advanced features in their outdoor adventures.

General
BrandCasio
ModelG-Shock MRG-G2000
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock MRG-G2000 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I perform basic operations on the Casio G-Shock MRG-G2000 smartwatch?

To perform basic operations on the Casio G-Shock MRG-G2000 smartwatch, follow these steps: 1. Familiarize yourself with the watch face items: - Day of the week: Indicates the current day of the week. - Airplane Mode mark: Indicates that the watch is in Airplane Mode. - Signal receive status, location information availability: Indicates the status of signal reception and location information. - Battery level: Indicates the current charge level of the watch. - Latitude: Indicates the rough latitude of the city for which location information was acquired. - Summer time setting: Indicates the summer time setting for the current Home City. - Bluetooth connection mark: Indicates a connection between the watch and a phone. - Alarm settings: Indicates if the alarm is enabled or disabled. - Time and signal reception marks: Indicate the progress of GPS signal reception and time adjustment operations. - Last signal receive result: Indicates the result of the last time adjustment operation. 2. Navigate between modes: - Use the (C) button to switch between modes. - Hold down (C) for at least one second to return to the Timekeeping Mode. - Hold down (C) for about 2.5 seconds to connect with a phone. These steps will help you get started with the basic operations of the Casio G-Shock MRG-G2000 smartwatch.

What should I do if the solar charging of the Casio G-Shock MRG-G2000 smartwatch is not working?

If the solar charging of the Casio G-Shock MRG-G2000 smartwatch is not working, follow these steps: 1. Ensure that the watch face (solar panel) is exposed to bright light when you are not wearing the watch. Avoid blocking the face with the sleeve of your clothing, as even partial blockage reduces power generation efficiency. 2. Check the charge level of the watch by pressing the (C) button to return to the Timekeeping Mode. The day of the week hand will indicate the battery charge level. If it shows "C" (Low Battery), the charge level is low. 3. If the charge level is low or the battery is dead, expose the watch face to light as soon as possible. This will initiate the charging process. Note that if the battery goes completely dead, the second hand will revolve counterclockwise until it stops at second 57, indicating that charging has started. 4. Avoid charging the watch under high-temperature conditions, such as on the dashboard of a vehicle parked in the sun or near a heat source. By following these steps, you can troubleshoot and address issues with the solar charging of the Casio G-Shock MRG-G2000 smartwatch.

How can I adjust the time on the Casio G-Shock MRG-G2000 smartwatch using GPS or the time calibration signal?

To adjust the time on the Casio G-Shock MRG-G2000 smartwatch using GPS or the time calibration signal, follow these steps: 1. Enter the Timekeeping Mode by pressing the (C) button. 2. Place the watch near a window or a location suitable for signal reception. 3. Wait for the watch to receive the time calibration signal. The second hand will point to "RC" during the reception process. 4. Once the reception is successful, the time and day settings will be adjusted automatically. Note: The reception process can take anywhere from two to ten minutes, and in some cases, up to 20 minutes. If GPS or time calibration signal reception is not possible, or if communication with a phone is not available, you can manually adjust the time settings using the following steps: 1. Pull out the crown to the second click. 2. Rotate the crown to change the World Time City. 3. Press the (A) button to confirm the selection. 4. Hold down the (A) button for about one second to change the summer time setting. 5. Push the crown back in to its normal position. By following these steps, you can adjust the time on the Casio G-Shock MRG-G2000 smartwatch using GPS or the time calibration signal, or manually if necessary.

What steps should I follow to connect the Casio G-Shock MRG-G2000 smartwatch with my mobile phone using Mobile Link?

To connect the Casio G-Shock MRG-G2000 smartwatch with your mobile phone using Mobile Link, follow these steps: 1. Open the Mobile Link app on your mobile phone. 2. On the watch, press and hold the (C) button for about 2.5 seconds until the second hand moves to "C" to establish a connection between the watch and the phone. 3. Follow the instructions displayed on the phone screen to complete the pairing process. If a pairing prompt message appears, perform the operation shown on the phone screen. 4. Once the pairing is successful, the watch will synchronize its time setting with the phone's time. The second hand will normally move to "Y(YES)" to indicate successful synchronization. Note: If the watch fails to synchronize the time with the phone, the second hand will move to "N" (NO). In such cases, you can manually adjust the hand and date indicator positions to correct the time. By following these steps, you can connect the Casio G-Shock MRG-G2000 smartwatch with your mobile phone using Mobile Link and synchronize the time between the two devices.

What should I do if I need to adjust the time settings on the Casio G-Shock MRG-G2000 smartwatch?

To adjust the time settings on the Casio G-Shock MRG-G2000 smartwatch, follow these steps: 1. Pull out the crown to the second click. This will display the current Home City on the indicator window. 2. Rotate the crown to change the World Time City. Select the desired city for your Home City. 3. Press the (A) button to confirm the selection. The current summer time setting will be displayed on the day of the week hand. 4. Hold down the (A) button for about one second to change the summer time setting. Each press of the (A) button will cycle through the options: "AT (AUTO)", "STD" (standard time), and "DST" (summer time). 5. Push the crown back in to its normal position. To adjust the time and day settings manually when GPS and time calibration signal reception is not possible, or when communication with a phone is not available, follow these steps: 1. Pull out the crown to the second click. 2. Rotate the crown to change the time and day settings. The settings will change in 15-minute increments. 3. Push the crown back in to complete the adjustment. By following these steps, you can easily adjust the time settings on the Casio G-Shock MRG-G2000 smartwatch.

Is the manual of the Casio G-Shock MRG-G2000 available in English?

Yes, the manual of the Casio G-Shock MRG-G2000 is available in English .

Is your question not listed? Ask your question here

No results