Casio G-Shock GW-9400-3ER manual

Casio G-Shock GW-9400-3ER
8 · 15
PDF manual
 · 14 pages
manualCasio G-Shock GW-9400-3ER





Congratulations upon your selection of this CASIO watch.


The built-in sensors of this watch measure direction, barometric pressure, temperature and altitude.
Measured values are then shown on the display. Such features make this watch useful when hiking,
mountain climbing, or when engaging in other such outdoor activities.
Warning !
The measurement functions built into this watch are not intended for taking measurements that
require professional or industrial precision. Values produced by this watch should be considered
as reasonable representations only.
When engaging in mountain climbing or other activities in which losing your way can create a
dangerous or life-threatening situation, always use a second compass to confi rm direction readings.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss
suffered by you or any third party arising through the use of this product or its malfunction.
Your watch’s Altimeter Mode calculates relative altitude based on changes in barometric pressure
measurement by its pressure sensor. For more information, see page E-36 and E-48.
Immediately before embarking or otherwise taking altitude readings, be sure to specify a reference
altitude. If you don’t the readings produced by the watch probably will not be very accurate. For more
information, see “To specify a reference altitude value” (page E-44).

About This Manual

Depending on the model of your watch, digital display text appears
either as dark fi gures on a light background, or light fi gures on a dark
background. All examples in this manual are shown using dark fi gures
on a light background.
Button operations are indicated using the letters shown in the
Note that the product illustrations in this manual are intended for
reference only, and so the actual product may appear somewhat
different than depicted by an illustration.

Things to check before using the watch

1. Check the battery power level.
indicated by the battery power indicator (page E-11)?
Go to step 2.
Power is low.
Charge the watch by placing it in a location
where it is exposed to light. For details, see “Charging the
Watch” (page E-10).
Does any one of the following conditions exist?
Battery power indicator indicates L and LOW is flashing on the
CHG is flashing on the display.
The face is blank.
The watch is charged
For details about
charging, see
“Charging the Watch”
(page E-10).
Battery power
2. Check the Home City and the daylight saving time (DST) setting.
Use the procedure under “To confi gure Home City and summer time settings” (page E-31) to confi gure
your Home City and daylight saving time settings.
Proper time calibration signal reception, and World Time Mode and Sunrise/Sunset Mode data depend
on correct Home City, time, and date settings in the Timekeeping Mode. Make sure you confi gure
these settings correctly.
3. Set the current time.
To set the time using a time calibration signal
See “To get ready for a receive operation” (page E-17).
To set the time manually
See “Confi guring Current Time and Date Settings Manually” (page E-33).
The watch is now ready for use.
For details about the watch’s radio controlled timekeeping feature, see “Radio Controlled Atomic
Timekeeping” (page E-15).


E-3 About This Manual
E-4 Things to check before using the watch
E-10 Charging the Watch
E-14 To recover from the sleep state
E-15 Radio Controlled Atomic Timekeeping
E-17 To get ready for a receive operation
E-19 To perform manual receive
E-22 To check the latest signal reception results
E-22 To turn auto receive on or off
E-24 Mode Reference Guide
E-29 Timekeeping
E-30 Using Date/Time Records
E-31 Confi guring Home City Settings
E-31 To confi gure Home City and summer time settings
E-33 Confi guring Current Time and Date Settings Manually
E-33 To change the current time and date settings manually
E-35 Specifying Temperature, Barometric Pressure, and Altitude Display Units
E-35 To specify temperature, barometric pressure, and altitude display units
E-36 Using the Altimeter Mode
E-37 To select the altitude screen format
E-37 To select the altitude auto reading interval
E-39 To take altitude readings
E-42 To specify the altitude differential start point
E-43 To use the altitude differential value
E-44 To specify a reference altitude value
E-45 To save a reading manually
E-51 Precautions Concerning Simultaneous Altitude and Temperature Readings
E-52 Taking Direction Readings
E-52 To perform 2-point calibration
E-54 To take a direction reading
E-58 To perform magnetic declination correction
E-61 Taking Barometric Pressure and Temperature Readings
E-61 To take barometric pressure and temperature readings
E-66 To enable or disable the barometric pressure change alert
E-68 To calibrate the pressure sensor and the temperature sensor
E-70 Viewing Memory Records
E-70 To view data in watch memory
E-74 To delete all saved data
E-74 To delete a specifi c record

Operation Guide 3410


View the manual for the Casio G-Shock GW-9400-3ER here, for free. This manual comes under the category Watches and has been rated by 15 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock GW-9400-3ER or do you need help? Ask your question here

Need help?

Do you have a question about the Casio G-Shock GW-9400-3ER and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Casio G-Shock GW-9400-3ER owners to provide you with a good answer.

Robin Doty • 1-6-2021 No comments

Is there a way to make it more readable

Is there a way to make it more readable
View photo
Answer this question
Paul Kennett • 31-3-2022 No comments

How do I increase the alarm volume

Answer this question
Stephen Arthur Johnson Johnson • 20-3-2021 No comments

How do I make sure my GW-9400 is in receive mode

Answer this question
Russell Pingul • 1-1-2021 No comments

How many feet the G shock rangeman can go under water?

Answer this question

Number of questions: 4

Casio G-Shock GW-9400-3ER specifications

Below you will find the product specifications and the manual specifications of the Casio G-Shock GW-9400-3ER.

Brand Casio
Model G-Shock GW-9400-3ER | GW-9400-3ER
Product Watch
EAN 4971850980674
Language English
Filetype Usermanual (PDF)
Technical details
Mechanism type Quartz (solar)
Watch dial type LED dial
Water resistant pressure 20 ATM
Water resistant depth 200 m
World time function
Alarm function
LED backlight
Snooze function
Clock mode 12h/24h
Radio signal receiver EU, USA, Japan, China
Electronic compass
Countdown timer
Watch type Bracelet watch
Watch case material Resin
Housing colour Green
Band material Resin
Band main colour Green
Watch glass type Mineral
Case shape Round
Watch dial main colour Black
Watch marker style Arabic numerals
Product design Sport
Gender Male
Battery type CTL1616
Battery level indicator
Number of batteries supported 1
Weight & dimensions
Width 53.5 mm
Depth 18.2 mm
Height 55.2 mm
Weight 80 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock GW-9400-3ER below.

Is your question not listed? Ask your question here

No results