Casio G-Shock GST-B300S manual

Casio G-Shock GST-B300S
7.5 · 1
PDF manual
 · 23 pages
English
manualCasio G-Shock GST-B300S

Specifying the Illumination

Duration

You can select either 1.5 seconds or three
seconds as the illumination duration.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) 13 times to display [LIGHT].
4. Press (E) to select an illumination
duration.
[1]: 1.5-second illumination
[3]: 3-second illumination
5. Press (A) to exit the setting screen.

Hand Alignment

Adjustment

Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.

Adjusting Hand Alignment

1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least 5 seconds.
Release the button when [00] starts to
flash.
This enables adjustment of second hand
alignment.
After five secondsAfter two seconds
Second hand
3. If the second hand is not aligned with 12
o’clock, use (B) and (E) to align it.
4. Press (D).
This enables adjustment of mode hand
alignment.
Mode hand
5. If the mode hand is not aligned with 12
o’clock, use (B) and (E) to align it.
6. Press (D).
This enables adjustment of the hour and
minute hands.
Minute handHour hand
7. If the hour and minute hands are not at 12
o’clock, use (B) and (E) to align them.
8. Press (A) to exit the setting screen.

Other Settings

This section explains other watch settings you
can configure.

Enabling the Button

Operation Tone

Use the procedure below to enable or disable
the tone that sounds when you press a button.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
Home City
3. Press (D) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
4. Press (E) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
5. Press (A) to exit the setting screen.
Note
Note that alarm and timer tones will still
sound even while the operation tone is
muted.

Operation Guide 5631

17

View the manual for the Casio G-Shock GST-B300S here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock GST-B300S or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock GST-B300S
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock GST-B300S below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock GST-B300S available in English?

Yes, the manual of the Casio G-Shock GST-B300S is available in English .

Is your question not listed? Ask your question here

No results