Casio G-Shock GST-B200B manual

Casio G-Shock GST-B200B
8.1 · 1
PDF manual
 · 22 pages
English
manualCasio G-Shock GST-B200B

Setting the Alarm

1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to
e
.
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Connected
3.
Y
Perform the operation shown on the
phone screen to configure alarm time
settings.

Adjusting Hand Alignment

If the hands are out of alignment even though
auto time adjustment is being performed, use
CASIO WATCHES to adjust them.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to
e
.
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Connected
3.
Y
Perform the operation shown on the
phone screen to correct hand alignment.

Phone Finder

You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
Do not use this function in areas where
phone call tones are restricted.
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
Connected Disconnected
2.
X
If the watch is in any mode besides the
Timekeeping Mode, hold down (D) for at
least two seconds to enter the
Timekeeping Mode.
3.
X
Hold down (E) for at least 1.5 seconds
until the second hand moves to [R].
The phone will sound a tone when it
establishes a connection with the watch.
It will take a few seconds before the
phone tone sounds.
ConnectedSearching for phone
4.
X
Press any button to stop the tone.
You can press any watch button to stop
the phone tone only during the first 30
seconds after it starts to sound.

Configuring Watch Settings

You can use CASIO WATCHES to specify the
amount of time until a Bluetooth connection is
automatically terminated, to enable or disable
the watch operation tone, and to configure
other settings.
1.
Y
Tap the “CASIO WATCHES” icon.
2.
X
Hold down (C) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to
e
.
If connection fails for some reason,
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Connected
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.

Operation Guide 5608

8

View the manual for the Casio G-Shock GST-B200B here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock GST-B200B or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock GST-B200B
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock GST-B200B below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock GST-B200B available in English?

Yes, the manual of the Casio G-Shock GST-B200B is available in English .

Is your question not listed? Ask your question here

No results