Casio G-Shock GST-B200B manual

Casio G-Shock GST-B200B
8.1 · 1
PDF manual
 · 22 pages
English
manualCasio G-Shock GST-B200B

Alarms and Hourly Time

Signal

The watch will beep when an alarm time is
reached. You can set up to five different
alarms. The hourly time signal causes the
watch to beep every hour on the hour.
The alarm sound is muted in the cases
described below.
When battery power is low
When watch is at Level 2 power saving
l
Power Saving Function

Configuring Alarm Settings

1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (E) to scroll through alarm numbers
([AL1] to [AL5]) until the number of the
alarm you want to configure is displayed.
Alarm time
Alarm number
3. Hold down (A) for at least two seconds.
Release the button when the hours digits
start to flash.
Hours
4. Use (B) and (E) to change the hour setting.
If you are using 12-hour timekeeping,
[P] indicates p.m.
5. Press (D).
This causes the minutes digits to flash.
Minutes
6. Use (B) and (E) to change the minute
setting.
7. Press (D).
This causes the alarm type to flash.
8. Use (E) to select the alarm type.
[DAILY]: Alarm sounds every day at the
alarm time.
[1TIME]: Alarm sounds only once at the
alarm time.
[SCHEDULE]: Alarm sounds on the
specified date.
l
Setting a Schedule Alarm
9. Press (A) to exit the setting screen.
[ALM] is shown on the display while an
alarm is set.
10. Hold down (D) for at least two seconds to
return to the Timekeeping Mode.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
You can also use CASIO WATCHES
to configure alarm time settings.
To stop the alarm
Pressing any button while the beeper is
sounding stops it.

Setting a Schedule Alarm

With [SCHEDULE], you can specify the year,
month, and day that you want an alarm to
sound.
Creating a Schedule Alarm
There are various schedule alarm variations,
and the variation that is set depends on the
year, month, and day settings you configure.
Three typical setting configurations are shown
below, but other configurations are also
possible.
A Year, month, day all specified
The alarm sounds once at the specified
time on the specified date.
B Year, month, day partially specified
Specifying only the year will cause the
alarm to sound at the specified time
every day of the specified year.
Specifying only the month and day will
cause the alarm to sound at the
specified time on the specified date
every year.
You can also create a schedule alarm by
specifying the month only, day only, year
and month only, and year and day only.
C Year, month, day not specified (Display:
[----.--.--])
In this case, the alarm will sound at the
specified time every day.
1. Enter the Alarm Mode.
l
Navigating Between Modes
2. Press (E) to scroll through alarm numbers
([AL1] to [AL5]) until the number of the
alarm you want to configure is displayed.
Alarm time
Alarm number

Operation Guide 5608

13

View the manual for the Casio G-Shock GST-B200B here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock GST-B200B or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock GST-B200B
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock GST-B200B below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock GST-B200B available in English?

Yes, the manual of the Casio G-Shock GST-B200B is available in English .

Is your question not listed? Ask your question here

No results