Casio G-Shock GPR-B1000 manual

Casio G-Shock GPR-B1000
8.3 · 13
PDF manual
 · 41 pages
English
manualCasio G-Shock GPR-B1000

Magnetic North and True

North

There are actually two types of north:
magnetic north and true north.
Magnetic north: North indicated by the needle
of a compass
True north: Direction to the North Pole
As shown in the illustration below, magnetic
north and true north are not the same.
Earth
Magnetic north
True north
Note
The north indicated on commercially
available maps is normally true north.

Digital Compass Reading

Precautions

Location During Use
Taking readings near sources of strong
magnetism can cause reading error. Keep the
watch away from the following types of items.
Permanent magnets (magnetic accessories,
etc.), metal objects, high-voltage wires, aerial
wires, electrical household appliances (TVs,
computers, cellphones, etc.)
Note that correct direction readings are not
possible indoors, especially inside of
reinforced concrete structures.
Accurate direction readings are not
possible in motor vehicles, on boats, on
aircraft, etc.
Storage Location
Exposure of the watch to magnetism can
affect the accuracy of digital compass
readings. Keep the watch away from the types
of items below.
Permanent magnets (magnetic accessories,
etc.), metal objects, electrical household
appliances (TVs, computers, cellphones, etc.)

Altitude Measurement

The watch takes altitude readings and
displays results based on air pressure
measurements taken by a built-in pressure
sensor.
Important!
The altitude readings displayed by the
watch are relative values that are
calculated based on barometric
pressure measured by the watch’s
pressure sensor. This means that
barometric pressure changes due to
weather can cause altitude readings
taken at the same location to be
different. Also note that the value
displayed by the watch may be
different from the actual elevation and/
or sea level elevation indicated for the
area where you are located. When
using the watch’s altimeter while
mountain climbing, it is recommended
that you regularly calibrate its readings
in accordance with local altitude
(elevation) indications.
l
Calibrating Altitude Readings
When using navigation while receiving
GPS signals, measured altimeter
values are automatically adjusted in
accordance with GPS signal data.
Note, however, that this may result in
some difference between the
measured value and the actual
altitude. Also note that the measured
altitude value adjustment operation
using GPS signal data may take a few
minutes. The adjustment operation
may take even longer, depending on
your current environment. Regular
manual adjustment of the measured
altitude value using locally available
information is recommended. The
watch will not use GPS signal data to
adjust measured altitude values for
one hour after you adjustment the
measured altitude value manually.
The altitude correction value and
barometric pressure changes may
result in display of a negative value.
Check the information below to find out
about how to minimize differences
between readings produced by the
watch, and values provided by local
altitude (elevation) indications.
l
Altitude Reading Precautions
Getting ready
Enter the Altimeter Mode.
l
Navigating Between Modes
l
Specifying Display Contents
Entering the Altimeter Mode starts altitude
readings.

Checking the Current

Altitude

Starting an altitude measurement operation
displays the altitude in your current location.
The watch takes altitude readings every
second for about the first three minutes. After
that, it takes readings according to the watch’s
auto measurement interval setting.
Check the information below to find out how
to configure the auto measurement interval.
l
Setting the Auto Measurement Interval
Note
To retrigger measurement, hold down
(A) for about one second.
Measurement range: -10,000 m to
10,000 m (-32,800 to 32,800 feet)
(Measurement unit: 1 meter (5 feet))
Note that calibrating altitude readings
will cause a change in the
measurement range.
[- - -] will appear for the measured value
if it is outside the allowable range.
Value Screen
Graph Screen

Operation Guide 3452

20

View the manual for the Casio G-Shock GPR-B1000 here, for free. This manual comes under the category smartwatch and has been rated by 13 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock GPR-B1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 3
D
Daniel RadulescuMarch 7, 2023

Hi,I have gpr b1000 jr and from yesterday the screen goes blank, Bluetooth and light work. I am trying to charge couple hours . Do you know why the scree is blank ? Thank you Best Regards

Hi,I have gpr b1000 jr and from yesterday the screen goes blank, Bluetooth and light work.
I am trying to charge couple hour...
zoom-in
View photo
1 comment
E
Emma of manua.lsDecember 19, 2023

The Casio G-Shock GPR-B1000 smartwatch has a feature called Display Illumination. You can manually illuminate the display by pressing a button. The watch also has an auto light function that automatically illuminates the display whenever the watch is angled towards your face for reading. However, please note that illumination will turn off automatically if an alarm starts to sound, and it is disabled during a GPS signal receive operation for time adjustment. If the screen of your GPR-B1000 smartwatch is going blank, there are a few possible reasons. It could be due to the display illumination being turned off or disabled. Please check if the illumination is enabled and try pressing a button to manually illuminate the display. Another possible reason could be a low battery. If you have been trying to charge the watch for a couple of hours and the screen is still going blank, it is recommended to charge the watch for a longer period of time to ensure the battery is fully charged. If the issue persists after trying these steps, please contact customer service for further assistance.

This answer is automatically generated
S
Stephen MorrisonJanuary 16, 2023

Rangeman 3452 display is blank and it won’t charge with the usb charger.

J
John John HelchAugust 21, 2021

My screen is blank and It seems as though the watch is dead

The Casio G-Shock GPR-B1000 is a smartwatch that offers various features and functions for everyday use. It is built with a rugged design in mind, making it durable and resistant to shocks, vibrations, and water, with a water resistance rating of 200 meters. One notable feature of the GPR-B1000 is its built-in GPS navigation system. This allows users to track their location accurately and navigate their way through different terrains, making it a suitable companion for outdoor activities such as hiking and camping. Additionally, it also has a built-in digital compass, altimeter, and barometer, providing users with essential information about their surroundings. The GPR-B1000 is powered by a rechargeable battery, ensuring long-lasting usage. It also supports solar charging, allowing users to keep the watch powered up even in environments where electricity is not readily available. Furthermore, the GPR-B1000 offers smartphone connectivity, enabling users to conveniently receive notifications, messages, and calls directly on their wrist. It also has a versatile display that can be customized to suit individual preferences and needs. The GPR-B1000 is designed to withstand various outdoor conditions, making it a reliable companion for adventurous individuals. Its robust build combined with its array of features makes it a practical and functional smartwatch suitable for those who require a durable and versatile timepiece.

General
BrandCasio
ModelG-Shock GPR-B1000
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock GPR-B1000 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time on my Casio G-Shock GPR-B1000?

To set the time on your smartwatch, go to the settings menu, navigate to the "Timekeeping" section, and select "Time Set." From there, you can manually adjust the hours, minutes, and seconds to ensure accurate timekeeping.

How can I connect my smartwatch to my smartphone?

Begin by installing the Casio G-Shock Connected app on your smartphone. Open the app, enable Bluetooth on both devices, and then follow the on-screen instructions to pair the watch with the phone. This allows you to enjoy various connectivity features and additional functionalities.

What is the optimal way to calibrate the altimeter on my G-Shock GPR-B1000?

For accurate altitude readings, it is crucial to calibrate the altimeter regularly. Ensure that you are in a known location with a known altitude, go to the altimeter settings, and select "Calibration." Follow the prompts to enter the correct altitude manually or use the GPS functionality for more precise calibration.

How do I access the GPS functions on my G-Shock GPR-B1000?

To utilize the GPS features, press and hold the dedicated GPS button on the side of the watch. This will activate the GPS antenna and start searching for satellite signals. Once connected, you can access various GPS-related functions like tracking, navigation, and recording location data.

Can I customize the display information on my smartwatch?

Absolutely! To personalize the display, press the mode button until you reach the desired mode. Then, press the adjust button to enter the customization settings. From there, you can customize the data displayed, choose different layouts, and even change the color schemes to suit your preferences.

Is the manual of the Casio G-Shock GPR-B1000 available in English?

Yes, the manual of the Casio G-Shock GPR-B1000 is available in English .

Is your question not listed? Ask your question here

No results