Casio G-Shock GG-B100 manual

Casio G-Shock GG-B100
9.3 · 6
PDF manual
 · 58 pages
English
manualCasio G-Shock GG-B100

Altitude

Measurement

The watch takes altitude readings and
displays results based on air pressure
measurements taken by a built-in pressure
sensor.
Important!
The altitude readings displayed by the
watch are relative values that are
calculated based on barometric
pressure measured by the watch’s
pressure sensor. This means that
barometric pressure changes due to
weather can cause altitude readings
taken at the same location to be
different. Also note that the value
displayed by the watch may be
different from the actual elevation and/
or sea level elevation indicated for the
area where you are located. When
using the watch’s altimeter while
mountain climbing, it is recommended
that you regularly calibrate its readings
in accordance with local altitude
(elevation) indications.
l
Calibrating Altitude Readings
(Offset)
The altitude correction value you
specify and/or barometric pressure
changes may cause a negative value
to be displayed.
Check the information at the link below
to find out about how to minimize
differences between readings
produced by the watch, and values
provided by local altitude (elevation)
indications.
l
Calibrating Altitude Readings
(Offset)
l
Altitude Reading Precautions

Checking the Current

Altitude

1. Enter the Altimeter Mode.
l
Navigating Between Modes
Entering the Altimeter Mode will start
altitude measurement and display the
altitude at your current location.
Altitude
Altitude graph
The watch takes altitude readings every
second for about the first three minutes.
After that, it takes readings according to
the watch’s auto measurement interval
setting.
Check the information at the link below
to find out how to configure the auto
measurement interval.
l
Setting the Auto Measurement
Interval
To retrigger measurement, press (A).
To return to the Timekeeping Mode,
press (B).
Note
If the hour and/or minute hand is
located over the digital display when
you perform an altitude measurement,
the hands will temporarily shift to the
22-second or 38-second position to
allow easier reading of measurement
values. The hands will unshift to their
normal positions after about three
seconds.
When you enter the Altimeter Mode,
the function hand indicates the altitude
difference if the previous altitude
measurement was retained.
l
Checking the Altitude Differential
from a Reference Point
Measurement range: -700 to 10,000
meters (-2,300 to 32,800 feet)
(Measurement unit: 1 meter (5 feet))
Note that calibrating altitude readings
will cause a change in the
measurement range.
[- - -] will appear for the measured value
if it is outside the allowable range.
Interpreting Altitude Graph Contents
50m*
6 readings ago
Current reading
*
1 square (
v
) is 10 m.

Calibrating Altitude

Readings (Offset)

To minimize the difference between locally
indicated and measured values, you should
update the reference altitude value (offset)
before setting off and during treks or any other
activities where you take altitude readings.
Also, you can ensure accurate measurements
by checking a map local altitude indications or
some other source for your current location’s
altitude, and regularly calibrating watch
readings with the latest information while
mountain climbing.
Note
You can find out the altitude at your
current location from signs, maps, on
the Internet, etc.
Differences between actual altitude
and watch readings can be caused by
the factors below.
ー 
Changes in barometric pressure
ー 
Changes in temperature caused by
variations in barometric pressure
and by elevation
Though altitude readings can be taken
without calibration, doing so may
produce readings that are very
different from indications by altitude
markers, etc.

Watch Operation Guide 5713

35

View the manual for the Casio G-Shock GG-B100 here, for free. This manual comes under the category smartwatch and has been rated by 6 people with an average of a 9.3. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock GG-B100 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 2
J
John CavenOctober 13, 2023

will the GG-B100 lose the settings I have put into it when the battery is changed?

M
MoMay 21, 2024

The watch will not pair with the phone

The Casio G-Shock GG-B100 is a smartwatch that offers a range of features and functionalities. Designed with durability in mind, it is built to withstand various environmental conditions, making it suitable for outdoor activities and sports. The watch is equipped with a range of sensors, including a compass, thermometer, and accelerometer, allowing users to track their steps, monitor their heart rate, and navigate their surroundings with ease. Additionally, it features a GPS system, enabling accurate location tracking during outdoor adventures. The GG-B100 comes with multiple timekeeping functions, including world time, alarms, and a stopwatch. It also offers Bluetooth connectivity, allowing users to connect the watch to their smartphones for seamless integration and access to additional features. The watch's design is stylish and rugged, with a sturdy and shock-resistant construction. It features a large and easy-to-read display, ensuring clear visibility in various lighting conditions. The strap is comfortable and adjustable, providing a secure fit for any wrist size. With a long battery life, the GG-B100 ensures that users can rely on its performance throughout the day without frequent charging. It is water-resistant, allowing it to be worn in wet conditions without risk of damage. Overall, the Casio G-Shock GG-B100 is a reliable and versatile smartwatch that offers a range of features suitable for outdoor enthusiasts and those in need of a durable timepiece.

General
BrandCasio
ModelG-Shock GG-B100
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock GG-B100 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time on my Casio G-Shock GG-B100?

Press and hold the "Adjust" button until the city code starts to flash. Use the "Forward" and "Reverse" buttons to scroll and select your desired city code. Press the "Mode" button to move to the hour and minutes settings. Use the "Forward" and "Reverse" buttons to adjust the time accordingly.

How do I enable or disable the Bluetooth connection on my Casio G-Shock GG-B100?

To enable Bluetooth, press and hold the "Adjust" button until the Bluetooth icon appears on the display. To disable Bluetooth, follow the same steps and make sure the Bluetooth icon disappears from the display.

How can I change the watch face design on my Casio G-Shock GG-B100?

Press and hold the "Adjust" button to enter the timekeeping mode. Use the "Forward" and "Reverse" buttons to select the "Watch" mode. From there, use the "Forward" and "Reverse" buttons to browse and select different watch face designs.

How do I measure my heart rate using my Casio G-Shock GG-B100?

Press the "Mode" button to enter the sensor mode. Scroll using the "Forward" and "Reverse" buttons until you reach the heart rate measurement function. Place your finger on the optical sensor located on the back of the watch and wait until your heart rate is displayed.

How can I track my steps and distance with the Casio G-Shock GG-B100?

Press the "Mode" button to enter the sensor mode. Use the "Forward" and "Reverse" buttons to select the pedometer function. The watch will automatically start tracking your steps and distance traveled. You can view your step count and distance by scrolling through the display.

Is the manual of the Casio G-Shock GG-B100 available in English?

Yes, the manual of the Casio G-Shock GG-B100 is available in English .

Is your question not listed? Ask your question here

No results