Casio G-Shock G-Squad GBD-H1000-8 manual

Casio G-Shock G-Squad GBD-H1000-8
7.5 · 1
PDF manual
 · 58 pages
English
manualCasio G-Shock G-Squad GBD-H1000-8
To check the step count
Display the TIME+DAILY screen.
l
Selecting a Timekeeping Mode Digital
Display Format
Note
The step count can show a value up to
99,999 steps. If the step count
exceeds 99,999, the maximum value
(99,999) remains on the display.
To prevent miscounts, the displayed
count does not increase for about 10
seconds after you start walking. After
you have been walking for about 10
seconds, the correct count appears,
including the steps you took during the
previous 10 seconds.
The step count is reset to zero at
midnight each day.
To save power, measurement stops
automatically if you take off the watch
(no watch movement) and do not
perform any operation for two or three
minutes.

Causes of Incorrect Step

Count

Any of the conditions below may make proper
counting impossible.
Walking while wearing slippers, sandals, or
other footwear that encourages a shuffling
gait
Walking on tile, carpeting, snow, or other
surface that causes a shuffling gait
Irregular walking (in a crowded location, in
a line where walking stops and starts at
short intervals, etc.)
Extremely slow walking or extremely fast
running
Pushing a shopping cart or baby stroller
In a location where there is a lot of vibration,
or riding on a bicycle or in a vehicle
Frequent movement of the hand or arm
(clapping, fanning movement, etc.)
Walking while holding hands, walking with
a cane or stick, or engaging in any other
movement in which your hand and leg
movements are not coordinated with each
other
Normal daily non-walking activities
(cleaning, etc.)
Wearing the watch on your dominant hand
Walking for 10 seconds or less

Other Settings

This section explains other watch settings you
can configure.

Button Operation Sound

Setting

Use the procedure below to enable or disable
the tone that sounds when you press a button.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[BEEP].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[OPERATION].
6. Press (C).
7. Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the BEEP
(sound) setting screen will re-appear.
is displayed in the Timekeeping
Mode while the operation tone is
disabled.
9. Press (E) twice to exit the setting screen.

Configuring Notification

Sound Settings

You can use the procedure below to enable or
disable the notification sound.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[BEEP].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[NOTIFICATION].
6. Press (C).
7. Use (A) and (D) to select a notification
sound ON/OFF setting.
[ALL ON]
Enables sound for all
notifications.
[USER]
Enables sound only for items
specified by you.
[ALL OFF]
Disables sound for all
notifications.
Note
The configuration of [USER]
notifications can be changed using G-
SHOCK MOVE.
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the BEEP
(sound) setting screen will re-appear.
is displayed in the Timekeeping
Mode while the notification tone is
disabled.
9.
Press (E) twice to exit the setting screen.

Operation Guide 3475

48

View the manual for the Casio G-Shock G-Squad GBD-H1000-8 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock G-Squad GBD-H1000-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock G-Squad GBD-H1000-8
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock G-Squad GBD-H1000-8 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock G-Squad GBD-H1000-8 available in English?

Yes, the manual of the Casio G-Shock G-Squad GBD-H1000-8 is available in English .

Is your question not listed? Ask your question here

No results