Casio G-Shock G-Squad GBD-H1000-8 manual

Casio G-Shock G-Squad GBD-H1000-8
7.5 · 1
PDF manual
 · 58 pages
English
manualCasio G-Shock G-Squad GBD-H1000-8

Barometric Pressure

and Temperature

Measurement

You can use the watch to take barometric
pressure and temperature readings for your
current location.
Important!
Check the information at the link below
to find out how to ensure correct
readings.
l
Barometric Pressure and
Temperature Reading
Precautions

Checking the Current

Barometric Pressure and

Temperature

1. Enter the Barometer/Temperature Mode.
l
Navigating Between Modes
Entering the Barometer/Temperature
Mode starts measurement and displays
the current barometric pressure and
temperature.
After you enter the Barometer/
Temperature Mode, the watch takes
readings about every five seconds for
three minutes. After that, a
measurement is taken about every two
minutes.
Value Screen
Temperature
Barometric pressure
Barometric Pressure Graph Screen
The graph shows barometric readings taken
every two hours. You can use the graph to
view changes in barometric pressure over the
past 72 hours, which can be used to predict
upcoming weather.
Temperature
Barometric pressure graph
Barometric pressure
A trend
like this:
Means this:
Rising barometric pressure,
which indicates that upcoming
weather probably will be fair.
Falling barometric pressure,
which indicates that upcoming
weather probably will be bad.
Note
To retrigger measurement, press (C).
The watch will automatically return to
the Timekeeping Mode if you do not
perform any operation in the
Barometer/Temperature Mode for
about one hour.
Measurement ranges are shown
below. [- - -] will appear for the
measured value if it is outside the
allowable range.
Barometric pressure measurement:
260 hPa to 1,100 hPa (7.65 inHg to
32.45 inHg)
Thermometer measurement: -10.0°C
to 60.0°C (14.0°F to 140.0°F)
Large changes in barometric pressure
and/or temperature can cause past
data readings to be plotted outside of
the visible area of the graph. Though
plots are not visible, the data is still
maintained in watch memory.

Barometric Pressure Change

Indications

Whenever the watch detects a significant
change in air pressure readings (due to
sudden altitude change, or to the passage of
a low pressure or high pressure area), it will
perform a sound and/or vibration operation
and display a flashing arrow to let you know.
The arrow that appears shows the direction of
the pressure change. These alerts are called
“Barometric Pressure Change Indications”.
This
indicator:
Means this:
Sudden drop in pressure
Sudden rise in pressure
Sustained rise in pressure,
shifting to a fall
Sustained fall in pressure, shifting
to a rise
Important!
To ensure correct barometric pressure
change indicator operation, enable it in
a location where the altitude is
constant (such as a lodge, camp area,
or on the ocean).
A change in altitude causes a change
in air pressure. Because of this, correct
readings are impossible. Do not take
readings while ascending or
descending a mountain, etc.
1. Enter the Barometer/Temperature Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Barometer/
Temperature Mode setting screen.
Pointer

Operation Guide 3475

39

View the manual for the Casio G-Shock G-Squad GBD-H1000-8 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock G-Squad GBD-H1000-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock G-Squad GBD-H1000-8
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock G-Squad GBD-H1000-8 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock G-Squad GBD-H1000-8 available in English?

Yes, the manual of the Casio G-Shock G-Squad GBD-H1000-8 is available in English .

Is your question not listed? Ask your question here

No results