Casio G-Shock G-Squad GBD-H1000-8 manual

Casio G-Shock G-Squad GBD-H1000-8
7.5 · 1
PDF manual
 · 58 pages
English
manualCasio G-Shock G-Squad GBD-H1000-8

Deleting All Notifications

1. Enter the Notification Mode.
l
Navigating Between Modes
2. Press (C).
This displays the notification list.
3. Hold down (A) for at least two seconds.
This displays the Notification Mode
setting screen.
Pointer
4. Use (A) and (D) to move the pointer to
[DELETE].
5. Press (C).
6. Use (A) and (D) to move the pointer to
[ALL].
7. Press (C).
8. Use (A) and (D) to move the pointer to
[EXECUTE].
To cancel data deletion, move the
pointer to [CANCEL].
9. Press (C).
This displays a confirmation screen.
10. Use (A) and (D) to move the pointer to
[YES] or [NO].
11. Press (C).
After the data delete operation is
complete, [DELETE COMPLETED] will
appear for a few seconds, and then the
Notification Mode screen will re-appear.

Digital Compass

You can use the Digital Compass Mode to
determine the direction of north, and to check
your bearing to a destination.
Important!
Check the information at the link below
to find out how to ensure correct
readings.
l
Calibrating Compass Readings
l
Digital Compass Reading
Precautions

Taking a Compass Reading

1. Enter the Compass Mode.
l
Navigating Between Modes
Entering the Compass Mode starts
compass readings.
2. Keeping the watch level, point 12 o’clock
in the direction of your desired objective.
North is indicated by
p
. The bearing
and bearing angle to your objective will
also appear on the display.
To retrigger the compass operation,
press (C).
Interpreting Bearing Readings
298°
Bearing angle
Bearing angle to objective
Bearing to objective
North
Objective
Directions: N (North), E (East), W (West), S
(South)
Note
Normally the Compass Mode
indicates magnetic north. You can also
configure settings to indicate true
north.
l
Setting Up for True North
Readings (Magnetic Declination
Calibration)
l
Magnetic North and True North
After the initial reading is displayed, the
watch will continue to take readings
about every 0.5 seconds for about the
next 60 seconds. The watch will return
to the Timekeeping Mode
automatically about 60 seconds after
you start a direction reading operation.
Aligning a Map with Actual
Surroundings (Setting a Map)
Setting a map means to align the map so the
directions indicated on it are aligned with the
actual directions of your location. Once you
set a map, you can more easily get a grasp of
the relationship between map markings and
actual geographic contours. To set a map with
this watch, align north on the map with the
north indication of the watch. Once you set the
map, you can compare your bearing on the
map with your surroundings, which will help
you determine your current location and
destination.
Note that map reading skills and experience
are required to determine your current
location and destination on a map.

Calibrating the Compass

Calibrating Compass Readings
Perform 3-point or figure 8 calibration
whenever you notice the watch’s compass
readings are different from those of another
compass, or before setting out on a climb or
trek.
Note that accurate compass readings
and/or calibration will not be possible in an
area where strong magnetism is present.
l
Digital Compass Reading Precautions

Operation Guide 3475

33

View the manual for the Casio G-Shock G-Squad GBD-H1000-8 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock G-Squad GBD-H1000-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock G-Squad GBD-H1000-8
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock G-Squad GBD-H1000-8 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock G-Squad GBD-H1000-8 available in English?

Yes, the manual of the Casio G-Shock G-Squad GBD-H1000-8 is available in English .

Is your question not listed? Ask your question here

No results