Casio G-Shock G-Squad GBD-H1000-8 manual

Casio G-Shock G-Squad GBD-H1000-8
7.5 · 1
PDF manual
 · 58 pages
English
manualCasio G-Shock G-Squad GBD-H1000-8
Important!
To specify the alert interval for each
item, use G-SHOCK MOVE. Note that
you cannot configure settings using
watch operations.
Note
You can also use G-SHOCK MOVE to
enable or disable alerts.

Displaying Your Actual

Running Distance

You can select either of two distance display
types: horizontal distance (straight-line
distance) or surface distance (actual
distance).
The surface distance display is calculated by
taking horizontal travel as well as vertical
movement into consideration.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (C).
This displays the GPS signal receive start
screen.
3. Press (A) or (D).
This displays the Training Mode screen.
4. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
5. Use (A) and (D) to move the pointer to
[DISTANCE].
6. Press (C).
7. Use (A) and (D) to move the pointer to [3D
DISTANCE].
8. Press (C).
9. Use (A) and (D) to select a setting.
[OFF] Displays horizontal distance.
[ON] Displays surface distance.
10. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the distance
display setting screen will re-appear.
11. Press (E) twice to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
change the distance display type.

Specifying the Distance Unit

Important!
When Tokyo (TOKYO) is the Home
City, the distance unit is fixed as
kilometers (km) and cannot be
changed.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[UNIT].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[DISTANCE].
6. Press (C).
7. Use (A) and (D) to select a distance unit.
[KILOMETER] Kilometers
[MILE] Miles
8. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the unit setting
screen will re-appear.
9. Press (E) twice to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
change the distance unit.

Enabling Auto Run Timing

(Auto Run Detection)

Starting to run while Auto Run Timing (auto run
detection) is enabled will cause run timing to
start automatically.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the Timekeeping Mode
setting screen.
Pointer
3. Use (A) and (D) to move the pointer to
[AUTO RUN DETECTION].
4. Press (C).
5. Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
6. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the Timekeeping
Mode setting screen will re-appear.
7. Press (E) to exit the setting screen.
Note
You can also use G-SHOCK MOVE to
enable or disable Auto Run Timing
(auto run detection).

Operation Guide 3475

26

View the manual for the Casio G-Shock G-Squad GBD-H1000-8 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock G-Squad GBD-H1000-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock G-Squad GBD-H1000-8
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock G-Squad GBD-H1000-8 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock G-Squad GBD-H1000-8 available in English?

Yes, the manual of the Casio G-Shock G-Squad GBD-H1000-8 is available in English .

Is your question not listed? Ask your question here

No results