Casio G-Shock G-Squad GBD-H1000-8 manual

Casio G-Shock G-Squad GBD-H1000-8
7.5 · 1
PDF manual
 · 58 pages
English
manualCasio G-Shock G-Squad GBD-H1000-8
5. Use (A) and (D) to move the pointer to
[GPS].
6. Press (C).
7. Use (A) and (D) to move the pointer to
[USING GPS].
8. Press (C).
9. Use (A) and (D) to move the pointer to
[ON] (enabled) or [OFF] (disabled).
10. Press (C).
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the GPS setting
screen will re-appear.
11. Use (A) and (D) to move the pointer to
[INTERVAL].
This option is for specifying the location
information acquisition interval by GPS
signal reception.
12. Press (C).
13. Use (A) and (D) to select a GPS receive
interval.
[NORMAL]
Acquires location info every
second.
[LONG]
Acquires location info every
minute.
14. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the GPS setting
screen will re-appear.
15. Press (E) twice to exit the setting screen.
Note
You can also change the GPS receive
interval using G-SHOCK MOVE.

Checking the Altitude

Differential Between Your

Current Location and a

Checkpoint

You can use G-SHOCK MOVE during run
timing to check the altitude differential
between a checkpoint and your current
location.
You can specify up to 10 checkpoints.
1. Enter the Training Mode.
l
Navigating Between Modes
2. Press (D) three times.
This displays the altimeter navigation
screen.
Checkpoint altitude
Current location altitude
Differential between checkpoint
and current altitudes
Travel time
A pointer (
) to the right of the scale
along the left of the screen also
indicates the altitude differential
between the checkpoint and current
altitude. The appearance of the pointer
changes as described below.
This
pointer:
Means this:
Altitude differential of +100m (Or:
+100ft) or more
Altitude differential within -100 to
100m (-100 to 100ft)
Altitude differential of -100m (Or:
-100ft) or more
Each press of (A) switches the checkpoint
display.
Important!
You can use G-SHOCK MOVE to
specify checkpoints along a running
course. Note that you cannot configure
settings using watch operations.

Setting Up Alerts

You can specify calories burned, elapsed
time, and altitude target values for training.
Then, the watch will perform a sound and/or
vibration operation whenever a target value is
reached while you are training.
1. Enter the Timekeeping Mode.
l
Navigating Between Modes
2. Press (C).
This displays the GPS signal receive start
screen.
3. Press (A) or (D).
This displays the Training Mode screen.
4. Hold down (A) for at least two seconds.
This displays the Training Mode setting
screen.
Pointer
5. Use (A) and (D) to move the pointer to
[ALERT].
6. Press (C).
7. Use (A) and (D) to select the item whose
setting you want to change.
[CALORIES] Calories burned
[TIME 1] Time 1
[TIME 2] Time 2
[ALTITUDE] Altitude
8. Press (C).
9. Use (A) and (D) to select an alert setting.
[OFF] Disabled
[ON (REPEAT)] Enabled (repeat)
[ON (1 TIME)] Enabled (one time)
While [ON (REPEAT)] is selected, an
alert operation is performed whenever
a target value is reached.
10. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the alert setting
screen will re-appear.
If you want to configure settings for
another item, repeat steps 7 through 10.
11.
Press (E) twice to exit the setting screen.

Operation Guide 3475

25

View the manual for the Casio G-Shock G-Squad GBD-H1000-8 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock G-Squad GBD-H1000-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock G-Squad GBD-H1000-8
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock G-Squad GBD-H1000-8 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock G-Squad GBD-H1000-8 available in English?

Yes, the manual of the Casio G-Shock G-Squad GBD-H1000-8 is available in English .

Is your question not listed? Ask your question here

No results