Casio G-Shock G-Squad GBD-H1000-8 manual

Casio G-Shock G-Squad GBD-H1000-8
7.5 · 1
PDF manual
 · 58 pages
English
manualCasio G-Shock G-Squad GBD-H1000-8
If you purchase another phone
Note
Before pairing with the new phone,
delete the old phone’s pairing
information from the watch.
l
Deleting Pairing Information from
the Watch
You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
l
C
Pair the watch with a phone.

Measuring Your Heart

Rate
While wearing the watch on your wrist, you can
use it to perform approximate measurement of
your heart rate.
You can use heart rate measurements to
monitor your daily health and to make your
training more effective.
Important!
Be sure to affix the watch to your wrist
before starting a heart rate
measurement operation. Starting a
measurement operation and then
affixing the watch to your wrist may
make correct measurement
impossible.
You can check your current heart rate by
entering the HR (Heart Rate) Mode. The
watch display will show the information shown
below during run timing.
Run Timing
A Current heart rate
B Target heart rate zone
The target zone is displayed in white.
C Current heart rate zone
Shows your current heart rate zone.
For details about heart rate zones, refer to the
information at the link below.
l
Starting Heart-rate Training

Using Heart Rate

Measurement

Even if you exit the HR (Heart Rate) Mode
while a heart rate measurement operation is in
progress, the watch will continue to display
your current heart rate.
In the HR (Heart Rate) Mode, you can view
heart rate data on a graph.
For more accurate display values, create
your profile before using heart rate
measurement.
l
Creating Your Profile
Enabling and Disabling Heart Rate
Measurement
While heart rate measurement is enabled, the
watch displays your current heart rate.
1. Enter the HR (Heart Rate) Mode.
l
Navigating Between Modes
2. Hold down (A) for at least two seconds.
This displays the heart rate measurement
enable/disable screen.
Pointer
3. Use (A) and (D) to select an ON/OFF
setting.
[ON (RUN ONLY)]
Enables heart rate
measurement while
running.
[OFF]
Disables heart rate
measurement.
[ON (ALWAYS)]
Enables constant heart
rate measurement.
4. Press (C) to complete the setting
operation.
After the setting operation is complete,
[SETTING COMPLETED] will appear for
a few seconds, and then the normal HR
(Heart Rate) mode screen or HR (Heart
Rate) Mode setting screen will re-appear.
Note
If the current heart rate measurement
setting is [ON (ALWAYS)], your heart
rate will be displayed in all modes
except for the Training Log Mode,
Training Status Mode, and Notification
Mode.
l
Viewing Life Log Related Data
Even if the current heart rate
measurement setting is [OFF], your
current heart rate is displayed in the
HR (Heart Rate) Mode.

Operation Guide 3475

21

View the manual for the Casio G-Shock G-Squad GBD-H1000-8 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock G-Squad GBD-H1000-8 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

General
BrandCasio
ModelG-Shock G-Squad GBD-H1000-8
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock G-Squad GBD-H1000-8 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Is the manual of the Casio G-Shock G-Squad GBD-H1000-8 available in English?

Yes, the manual of the Casio G-Shock G-Squad GBD-H1000-8 is available in English .

Is your question not listed? Ask your question here

No results