Casio G-Shock Classic GW-M5610-1ER manual

Casio G-Shock Classic GW-M5610-1ER
8.7 · 24
PDF manual
 · 6 pages
English
manualCasio G-Shock Classic GW-M5610-1ER

Operation Guide 3159

6
Radio-controlled Atomic Timekeeping Precautions
Strong electrostatic charge can result in the wrong time being set.
The time calibration signal bounces off the ionosphere. Because of this, such factors
as changes in the reflectivity of the ionosphere, as well as movement of the
ionosphere to higher altitudes due to seasonal atmospheric changes or the time of
day may change the reception range of the signal and make reception temporarily
impossible.
Even if the time calibration signal is received properly, certain conditions can cause
the time setting to be off by up to one second.
The current time setting in accordance with the time calibration signal takes priority
over any time settings you make manually.
The watch is designed to update the date and day of the week automatically for the
period January 1, 2000 to December 31, 2099. Setting of the date by the time
calibration signal cannot be performed starting from January 1, 2100.
This watch can receive signals that differentiate between leap years and non-leap
years.
Though this watch is designed to receive both time data (hour, minutes, seconds)
and date data (year, month, day), certain signal conditions can limit reception to time
data only.
If you are in an area where proper time calibration signal reception is impossible, the
watch keeps the time with the precision noted in “Specifications”.
If you have problems with proper time calibration signal reception or if the time
setting is wrong after signal reception, check your current city code, DST (summer
time), and auto receive settings.
The Home City setting reverts to the initial default of
TYO (Tokyo) whenever the
battery power level drops to Level 5 or when you have the rechargeable battery
replaced. If this happens, change the Home City to the setting you want.
Transmitters
The time calibration signal received by this watch depends on the currently selected
Home City code.
When a U.S. time zone is selected, the watch receives the time calibration signal
transmitted from the United States (Fort Collins).
When a Japanese time zone is selected, the watch receives the time calibration
signal transmitted from Japan (Fukushima and Fukuoka/Saga).
When a European time zone is selected, the watch receives the time calibration
signals transmitted from Germany (Mainflingen) and England (Anthorn).
When a China time zone is selected, the watch receives the time calibration signals
transmitted from China (Shangqiu City).
When your Home City is LIS, LON, MAD, PAR, ROM, BER, STO, ATH , or MOW
(which can receive both the Anthorn and Mainflingen signals), the watch first tries
to pick up the signal it last successfully received. If that fails, it tries the other signal.
For the first receive after you select your Home City, the watch tries the nearest
signal first (Anthorn for LIS, LON, Mainflingen for MAD, PA R , ROM, BER, STO, ATH,
and MOW).
Auto Return
If you do not perform any operation for about two or three minutes while a setting
screen (with a flashing setting) is on the display, the watch will exit the setting screen
automatically.
The watch returns to the Timekeeping Mode automatically if you do not perform any
button operation for two or three minutes in the Alarm Mode.
Scrolling
B and D buttons are used in various modes and setting screens to scroll through
data on the display. In most cases, holding down these buttons during a scroll
operation scrolls at high speed.
Initial Screens
When you enter the World Time Mode or Alarm Mode, the data you were viewing
when you last exited the mode appears first.
Timekeeping
Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
The year can be set in the range of 2000 to 2099.
The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to change
it except when battery power drops to Level 5.
The current time for all city codes in the Timekeeping Mode and World Time Mode is
calculated in accordance with the Coordinated Universal Time (UTC) for each city,
based on your Home City time setting.
World Time
The seconds count of the World Time is synchronized with the seconds count of the
Timekeeping Mode.
Illumination Precautions
The electro-luminescent panel that provides illumination loses power after very long
use.
Illumination may be difficult to see when viewed under direct sunlight.
The watch may emit an audible sound whenever the display is illuminated. This is
due to vibration of the EL panel used for illumination, and does not indicate
malfunction.
Illumination turns off automatically whenever an alarm sounds.
Frequent use of illumination runs down the battery.
Auto light switch precautions
Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light
switch to operate when it is not needed, which shortens battery life. If you want to
wear the watch on the inside of your wrist, turn off the auto light switch feature.
Illumination may not turn on if the face of the watch is
more than 15 degrees above or below parallel. Make
sure that the back of your hand is parallel to the ground.
Illumination turns off after a preset amount of time (1.5
seconds), even if you keep the watch pointed towards
your face.
Static electricity or magnetic force can interfere with proper operation of the auto
light switch. If illumination does not turn on, try moving the watch back to the starting
position (parallel with the ground) and then tilt it back toward you again. If this does
not work, drop your arm all the way down so it hangs at your side, and then bring it
back up again.
Under certain conditions, illumination may not turn on until about one second after
you turn the face of the watch towards you. This does not necessarily indicate
malfunction of the auto light switch.
You may notice a very faint clicking sound coming from the watch when it is shaken
back and forth. This sound is caused by mechanical operation of the auto light
switch, and does not indicate a problem with the watch.
More than 15 degreestoo high

Specifications

Accuracy at normal temperature: ± 15 seconds a month (with no signal calibration)
Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Home City code (can be assigned one of 48 city codes); Standard Time /
Daylight Saving Time (summer time)
Time Calibration Signal Reception: Auto receive 6 times a day (5 times a day for the
Chinese calibration signal) (Remaining auto receives cancelled as soon as
one is successful); Manual receive
Receivable Time Calibration Signals: Mainflingen, Germany (Call Sign: DCF77,
Frequency: 77.5 kHz); Anthorn, England (Call Sign: MSF, Frequency: 60.0
kHz); Fort Collins, Colorado, the United States (Call Sign: WWVB, Frequency:
60.0 kHz); Fukushima, Japan (Call Sign: JJY, Frequency: 40.0 kHz); Fukuoka/
Saga, Japan (Call Sign: JJY, Frequency: 60.0 kHz); Shangqiu City, Henan
Province, China (Call Sign: BPC, Frequency: 68.5 kHz)
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Alarms: 5 daily alarms (four one-time alarms; one snooze alarm); Hourly Time Signal
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 23:59' 59.99''
Measuring modes: Elapsed time, split time, two finishes
Countdown Timer:
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
Illumination: EL (electro-luminescent panel); Full Auto Light Switch
Other: Power Saving; Button operation tone on/off
Power Supply: Solar cell and one rechargeable battery
Approximate battery operating time: 10 months (from full charge to Level 4) under
the following conditions:
Watch not exposed to light
Internal timekeeping
Display on 18 hours per day, sleep state 6 hours per day
1 illumination operation (1.5 seconds) per day
10 seconds of alarm operation per day
Approximately 4 minutes of signal reception per day

City Code Table

Lisbon
London
Madrid
Paris
Rome
Berlin
Stockholm
Athens
Cairo
Jerusalem
Moscow
Jeddah
Te h ra n
Dubai
Kabul
Karachi
Delhi
Dhaka
Yangon
Bangkok
Singapore
Hong Kong
Beijing
Taipei
Seoul
Tokyo
0
+1
+2
+3
+3.5
+4
+4.5
+5
+5.5
+6
+6.5
+7
+8
+9
UTC
LIS
LON
MAD
PA R
ROM
BER
STO
AT H
CAI
JRS
MOW
JED
THR
DXB
KBL
KHI
DEL
DAC
RGN
BKK
SIN
HKG
BJS
TPE
SEL
TYO
City
UTC Offset/
GMT Differential
City
Code
City
UTC Offset/
GMT Differential
City
Code
Based on data as of December 2009.
The rules governing global times (UTC offset and GMT differential) and summer
time are determined by each individual country.
ADL
GUM
SYD
NOU
WLG
PPG
HNL
ANC
YVR
LAX
YEA
DEN
MEX
CHI
MIA
YTO
NYC
SCL
YHZ
YYT
RIO
RAI
Adelaide
Guam
Sydney
Noumea
Wellington
Pago Pago
Honolulu
Anchorage
Vancouver
Los Angeles
Edmonton
Denver
Mexico City
Chicago
Miami
Toronto
New York
Santiago
Halifax
St. Johns
Rio De Janeiro
Praia
+9.5
+10
+11
+12
–11
–10
–9
–8
–7
–6
–5
–4
–3.5
–3
–1

Manual

View the manual for the Casio G-Shock Classic GW-M5610-1ER here, for free. This manual comes under the category Watches and has been rated by 24 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Casio G-Shock Classic GW-M5610-1ER or do you need help? Ask your question here

Need help?

Do you have a question about the Casio G-Shock Classic GW-M5610-1ER and the answer is not in the manual? Ask your question here. Provide a clear and comprehensive description of the problem and your question. The better your problem and question is described, the easier it is for other Casio G-Shock Classic GW-M5610-1ER owners to provide you with a good answer.

Perry e duffy • 7-3-2021 No comments

How do i change from regular time to military time?

Answer this question
Greg Whitaker • 27-12-2020 No comments

Can you adjust the illumination time on the 5610

Answer this question
Steve • 2-9-2020 No comments

Qhat is appropriate battery

Answer this question
KyleK • 22-8-2020 No comments

In stop watch mode is there a way to see the local time in the upper right window or has this model relegated this to only see the hours lapsed?

Answer this question
Frank Gerace • 13-6-2020 No comments

What’s the best way to sync my Casio gwm 5610 with the atomic clock, and how will I know it’s been successful?

Answer this question

Number of questions: 5

Casio G-Shock Classic GW-M5610-1ER specifications

Below you will find the product specifications and the manual specifications of the Casio G-Shock Classic GW-M5610-1ER.

General
Brand Casio
Model G-Shock Classic GW-M5610-1ER | GW-M5610-1ER
Product Watch
EAN 4971850966166
Language English
Filetype Usermanual (PDF)
Technical details
Shockproof
Radio signal receiver EU, US, JP, CH
World time function
Stopwatch
Stopwatch accuracy 0.01 s
Stopwatch measuring capacity 24 h
Countdown timer
Countdown timer range 1 - 1440 min
Alarm function
Snooze function
Calendar
Waterproof
Water resistant pressure 20 ATM
Mechanism type Tough Solar
Chronograph -
Chronometer -
Watch dial type -
Watch type Wrist watch
Calendar type Day
Design
Watch glass type Mineral
Watch case material Resin
Band material Resin
Housing colour Black
Band main colour Black
Watch dial main colour Black
Product design -
Case shape Rectangular
Gender Unisex
Power
Battery level indicator
Weight & dimensions
Width 43.2 mm
Depth 12.7 mm
Height 46.7 mm
Weight 51.7 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-Shock Classic GW-M5610-1ER below.

Is your question not listed? Ask your question here

No results