Casio G-SHOCK Classic GD-100MS-3ER manual

Casio G-SHOCK Classic GD-100MS-3ER
7.6 · 1
PDF manual
 · 4 pages
English
manualCasio G-SHOCK Classic GD-100MS-3ER
4

Operation Guide 3263

Flash Alert
When Flash Alert is turned on, the illumination flashes for
the alarms, the Hourly Time Signal and the countdown
alarm.
To turn Flash Alert on and off
In the Timekeeping Mode, hold down 1. A until the
seconds start to flash, which indicates the setting
screen.
Press 2. C ten times to display the Flash Alert setting
screen.
Press 3. D to toggle Flash Alert on and off.
The Flash Alert on indicator is shown on the display in
all modes while this function is turned on.
Press 4. A to exit the setting screen.
Illumination Precautions
Illumination loses power after very long use.
Illumination may be hard to see when viewed under direct sunlight.
Illumination will turn off automatically if an alarm starts to sound while Flash Alert is
turned off. When Flash Alert is turned on, illumination will flash with the alarm.
Frequent use of illumination runs down the battery.
Auto light switch precautions
Avoid wearing the watch on the inside of your wrist. Doing so causes the auto light
switch to operate when it is not needed, which shortens battery life. If you want to
wear the watch on the inside of your wrist, turn off the auto light switch feature.
Illumination may not turn on if the face of the watch is
more than 15 degrees above or below parallel. Make sure
that the back of your hand is parallel to the ground.
Illumination turns off after the preset illumination duration
(see “To specify the illumination duration”), even if you
keep the watch pointed towards your face.
Static electricity or magnetic force can interfere with
proper operation of the auto light switch. If illumination
does not turn on, try moving the watch back to the
starting position (parallel with the ground) and then tilt it
back towards you again. If this does not work, drop your
arm all the way down so it hangs at your side, and then
bring it back up again.
Under certain conditions, illumination may not turn on until about one second after
you turn the face of the watch towards you. This does not necessarily indicate
malfunction of the auto light switch.
You may notice a very faint clicking sound coming from the watch when it is shaken
back and forth. This sound is caused by mechanical operation of the auto light
switch, and does not indicate a problem with the watch.

Specifications

Accuracy at normal temperature: ±15 seconds a month
Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Other: Multi Time (one Home City Time and three Local Times); Daylight Saving
Time (summer time)/Standard Time
World Time: 48 cities (31 time zones) and Coordinated Universal Time
Other: Standard Time/Daylight Saving Time (summer time); Home Time City/
World Time City swapping
Alarms: 5 alarms (One-time or Daily), Hourly Time Signal
Countdown Timer
Measuring unit: 1/10 second
Input range: 1 second to 24 hours (1-second increments, 1-minute increments and
1-hour increments)
Stopwatch
Measuring unit: 1/100 second
Measuring capacity: 23:59’ 59.99”
Measuring modes: Elapsed time, split time, two finishes
Illumination: LED (light-emitting diode); Selectable illumination duration
Other: Button operation tone on/off; Auto Light Switch; Flash alert
Battery: One lithium battery (Type: CR2025)
Approximately 7 years on type CR2025; 20 seconds of alarm operation (with flash
alert), 1.5 seconds of illumination per day

City Code Table

City
Code
City
UTC Offset/
GMT Differential
PPG Pago Pago –11
HNL Honolulu –10
ANC Anchorage –9
YVR Vancouver
–8
LAX Los Angeles
YEA Edmonton
–7
DEN Denver
MEX Mexico City
–6
CHI Chicago
NYC New York –5
SCL Santiago
–4
YHZ Halifax
YYT St. Johns –3.5
RIO Rio De Janeiro –3
FEN
Fernando de Noronha
–2
RAI Praia –1
UTC
0LIS Lisbon
LON London
MAD Madrid
+1
PAR Paris
ROM Rome
BER Berlin
STO Stockholm
ATH Athens
+2CAI Cairo
JRS Jerusalem
City
Code
City
UTC Offset/
GMT Differential
MOW Moscow
+3
JED Jeddah
THR Tehran +3.5
DXB Dubai +4
KBL Kabul +4.5
KHI Karachi +5
DEL Delhi +5.5
KTM Kathmandu +5.75
DAC Dhaka +6
RGN Yangon +6.5
BKK Bangkok +7
SIN Singapore
+8
HKG Hong Kong
BJS Beijing
TPE Taiepei
SEL Seoul
+9
TYO Tokyo
ADL Adelaide +9.5
GUM Guam
+10
SYD Sydney
NOU
Noumea +11
WLG
Wellington +12
Based on data as of December 2009.
The rules governing global times
(UTC offset and GMT differential) and
summer time are determined by each
individual country.
Flash Alert on indicator
More than 15 degrees
too high

Manual

View the manual for the Casio G-SHOCK Classic GD-100MS-3ER here, for free. This manual comes under the category watches and has been rated by 1 people with an average of a 7.6. This manual is available in the following languages: English. Do you have a question about the Casio G-SHOCK Classic GD-100MS-3ER or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Casio G-SHOCK Classic GD-100MS-3ER specifications

Below you will find the product specifications and the manual specifications of the Casio G-SHOCK Classic GD-100MS-3ER.

The Casio G-SHOCK Classic GD-100MS-3ER is a wristwatch offering a sturdy and reliable timekeeping solution. This watch showcases a tough and rugged design, making it suitable for outdoor activities or harsh environments. The dark green color adds a touch of style, while the overall construction ensures longevity. Featuring a digital dial display, the Casio G-SHOCK Classic GD-100MS-3ER provides clear and easy-to-read time information. Its backlight function enhances visibility in low-light conditions. Additionally, the watch includes a stopwatch and countdown timer, enabling precise time tracking for various activities. Equipped with a resin case and band, the Casio G-SHOCK Classic GD-100MS-3ER is resistant to shocks and impacts. This watch also boasts a water resistance rating of up to 200 meters, making it suitable for swimming and other water-related activities. The Casio G-SHOCK Classic GD-100MS-3ER utilizes a reliable quartz movement, ensuring accurate timekeeping. It is powered by a long-lasting battery, minimizing the need for frequent replacements. With its practical features and durable build, the Casio G-SHOCK Classic GD-100MS-3ER is an ideal watch for individuals seeking a dependable timepiece that can withstand various conditions. Whether used for everyday wear or during outdoor adventures, this watch offers a combination of functionality and durability.

General
BrandCasio
ModelG-SHOCK Classic GD-100MS-3ER
Productwatch
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio G-SHOCK Classic GD-100MS-3ER below.

A battery in my watch has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

How do I switch between different modes on the Casio G-SHOCK Classic GD-100MS-3ER watch?

To switch between different modes on the Casio G-SHOCK Classic GD-100MS-3ER watch, follow these steps: 1. Press the C button: This will allow you to change from one mode to another. That's it! By pressing the C button, you can easily switch between different modes on your Casio G-SHOCK Classic GD-100MS-3ER watch.

Why is the time and date on my Casio G-SHOCK Classic GD-100MS-3ER watch not accurate?

The time and date on your Casio G-SHOCK Classic GD-100MS-3ER watch may not be accurate due to the following reasons: 1. Incorrect time zone setting: Check if the watch is set to the correct time zone. Use the Timekeeping Mode to adjust the city code and ensure it matches your current location. 2. Daylight Saving Time (DST) setting: If you observe a time difference during DST, make sure the DST setting is enabled if applicable in your region. Use the Timekeeping Mode to toggle between DST and Standard Time. 3. Incorrect time and date settings: Verify that the time and date settings are correct. Access the setting screen in the Timekeeping Mode by pressing and holding the A button until the seconds start to flash. Use the C button to navigate through the settings and the D and B buttons to make adjustments. 4. Weak battery: If the watch is running on a low battery, it may affect the accuracy of the time and date. Consider replacing the battery if necessary. By checking and adjusting these settings, you should be able to ensure the accuracy of the time and date on your Casio G-SHOCK Classic GD-100MS-3ER watch.

How do I turn on or off the auto light switch feature on my Casio G-SHOCK Classic GD-100MS-3ER watch?

To turn on or off the auto light switch feature on your Casio G-SHOCK Classic GD-100MS-3ER watch, follow these steps: 1. Enter the Timekeeping Mode: Press the A button until the seconds start to flash, indicating the setting screen. 2. Access the auto light switch setting: Press the C button ten times to display the auto light switch setting screen. 3. Toggle the auto light switch: Press the D button to switch the auto light switch on or off. 4. Confirm the setting: The auto light switch on indicator will be displayed on the watch's screen in all modes when the feature is turned on. 5. Exit the setting screen: Press the A button to exit the setting screen and return to the Timekeeping Mode. By following these steps, you can easily turn on or off the auto light switch feature on your Casio G-SHOCK Classic GD-100MS-3ER watch.

What are the different graphic areas displayed on my Casio G-SHOCK Classic GD-100MS-3ER watch?

The Casio G-SHOCK Classic GD-100MS-3ER watch has several graphic areas displayed on its screen. These graphic areas include: 1. Graphic area A: This area displays various indicators such as the PM indicator, auto light switch on indicator, DST indicator, flash alert on indicator, hourly time signal on indicator, alarm on indicator, and mute indicator. 2. Graphic area B: This area is used to display additional information such as the day of the week, hour, minutes, seconds, month, and day. These graphic areas provide important information and indicators that help you navigate and use the features of your Casio G-SHOCK Classic GD-100MS-3ER watch. Please note that the specific layout and design of the graphic areas may vary slightly depending on the model and version of the watch.

How do I calculate world time using the UTC time offset values on my Casio G-SHOCK Classic GD-100MS-3ER watch?

To calculate world time using the UTC time offset values on your Casio G-SHOCK Classic GD-100MS-3ER watch, follow these steps: 1. Enter the World Time Mode: Press the D button repeatedly until the World Time Mode is displayed. 2. Select the desired city: Use the C button to scroll through the city codes until you find the desired city. 3. Determine the UTC offset: The UTC offset value for the selected city will be displayed on the screen. This value represents the time difference between the selected city and Coordinated Universal Time (UTC). 4. Calculate the world time: Add or subtract the UTC offset value from the current time in the Timekeeping Mode to determine the world time for the selected city. For example, if the UTC offset value for the selected city is +3, and the current time in the Timekeeping Mode is 10:00 AM, the world time for the selected city would be 1:00 PM. By following these steps, you can easily calculate world time using the UTC time offset values on your Casio G-SHOCK Classic GD-100MS-3ER watch.

Is the manual of the Casio G-SHOCK Classic GD-100MS-3ER available in English?

Yes, the manual of the Casio G-SHOCK Classic GD-100MS-3ER is available in English .

Is your question not listed? Ask your question here

No results