Casio Edifice EQB-800 manual

Casio Edifice EQB-800
7.5 · 1
PDF manual
 · 20 pages
English
manualCasio Edifice EQB-800

Enabling or Disabling Alert

Sounds

You can configure a setting so the watch
sounds a tone when the lap time reaches the
target value during measurement.
1.
Pull out the crown to the first click.
This will cause the mode hand to move “T”
or “F”.
Pulling out the crown while a
measurement operation is in progress
in the stopwatch mode will stop the
operation and
reset the stopwatch to all
zeros.
2.
Hold down (B) for about two seconds.
This will toggle alert tone between
enabled and disabled.
Pressing
(B)
in place of step 2 will cause
the second hand to indicate the current
setting.
30
OFFON
3.
Push the crown back in.
4.
Press (A) twice to return to the Calendar
Mode.

Example: Recording a Race

Lap Time

This section explains how to measure lap
times in
watch memory while watching a race,
and check the difference between a lap time
and target value. It also shows how you can
view lap times with CASIO WATCH+ after the
race is over.
l
Split Times and Lap Times
30
Before a race
At this time, you should specify the target
value
type.
If you specify TARGET (Target) as
the target value type, you should also specify
the TARGET (Target) value.
l
Using CASIO WATCH+ to Change the
Target Value Type
l
Using Watch Operations to Change the
Target Value Type
l
Specifying the TARGET (Target) Value
During a race
During the race, you measure split times. Lap
times are also measured internally by the
watch.
1.
X Hold down (A) for about 2 seconds.
This will cause the watch to enter the
Calendar Mode.
30
2.
X Press (A) once.
This will cause the watch to enter the
Stopwatch Mode.
30
Lap evaluation
24-hourMinutes
Hours
Seconds
3.
X Use the operations below to measure
elapsed time.
B
D
D
B
Stop
Start
Pressing (D) at the end of each lap will
record each lap time in watch memory.
Lap times are recorded in units of
1/1000 seconds.
You can also use the mode hand to
determine the difference between the
lap time measured internally by the
watch and the target value.
l
Checking the Difference between a
Lap Time and the Target Time
4.
X Press (D) to reset the elapsed time to
zero.
5.
X Press (A) twice to return to the Calendar
Mode.
After a race
After the race is finished, you can view the
measure lap times with CASIO WATCH+.
l
Sending Stopwatch Data to a Phone
l
Checking a Lap Time

Alarm

The watch will beep when the alarm time is
reached.
The beeper
is muted in the cases described
below.
When battery power is low
When watch is at Level 2 power saving
l Power Saving
Getting ready
Perform this procedure in the Alarm Mode.
l
Navigating Between Modes
30
Alarm Mode

Operation Guide 5512

14

View the manual for the Casio Edifice EQB-800 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-800 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
B
Bishnu pradhanFebruary 9, 2024

Why there is no video for setting time of EQB 800?

Why there is no video for setting time of EQB 800?
zoom-in
View photo

The Casio Edifice EQB-800 is a smartwatch that offers various features and functions for everyday use. Designed with a sleek and stylish appearance, it is suitable for individuals looking for a sophisticated wearable device. One notable feature of the Casio Edifice EQB-800 is its ability to connect to a smartphone via Bluetooth. This enables users to receive notifications such as calls, messages, and emails, directly on their wrist. Additionally, it has a handy alarm function that can be set to multiple time zones, making it convenient for frequent travelers. The Casio Edifice EQB-800 also features a chronograph, which allows users to measure elapsed time accurately. Its stopwatch function is precise and reliable, making it useful for various sports activities or timing events. Furthermore, this smartwatch is equipped with a solar-powered battery, ensuring long-lasting usage without the need for frequent charging. It also has a water resistance rating, making it suitable for daily wear and protection against splashes or brief immersion in water. The Casio Edifice EQB-800 comes with a durable strap, ensuring comfortable and secure wearing throughout the day. Its scratch-resistant mineral glass protects the watch face from everyday wear and tear, ensuring longevity. In conclusion, the Casio Edifice EQB-800 is a stylish and functional smartwatch that offers features such as smartphone connectivity, chronograph, solar-powered battery, and water resistance. With its sleek design and reliable performance, it is a suitable choice for individuals seeking a modern and sophisticated timepiece.

General
BrandCasio
ModelEdifice EQB-800
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-800 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How can I set the time on my Casio Edifice EQB-800?

To set the time on your Casio Edifice EQB-800, you can utilize the Timekeeping Mode. By accessing the Timekeeping Mode, you can adjust the hour, minutes, and seconds to ensure accurate time on your smartwatch.

How can I connect my Casio Edifice EQB-800 to my smartphone?

Connect your Casio Edifice EQB-800 to your smartphone by installing the dedicated Casio Edifice app on your compatible device. Once installed, follow the app's instructions to establish a Bluetooth connection between your watch and smartphone.

How can I customize the date and day display on my Casio Edifice EQB-800?

You can customize the date and day display on your Casio Edifice EQB-800 by accessing the watch's settings through the Mode button. From there, navigate to the Date/Day setting to adjust the format and style of the date and day display according to your preference.

How can I check my heart rate using my Casio Edifice EQB-800?

The Casio Edifice EQB-800 does not have a built-in heart rate monitor. It focuses primarily on timekeeping and connectivity features, rather than fitness-related measurements.

How can I switch between different time zones on my Casio Edifice EQB-800?

Switch between different time zones on your Casio Edifice EQB-800 by utilizing the World Time Mode. By accessing this mode, you can select the desired time zone and adjust the watch accordingly, allowing you to display and track multiple time zones simultaneously.

Is the manual of the Casio Edifice EQB-800 available in English?

Yes, the manual of the Casio Edifice EQB-800 is available in English .

Is your question not listed? Ask your question here

No results