Casio Edifice EQB-800 manual

Casio Edifice EQB-800
7.5 · 1
PDF manual
 · 20 pages
English
manualCasio Edifice EQB-800

Configuring Dual Time

Settings

Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
30
Dual Time
Dual Time 24-hour
1.
Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock.
2.
Rotate
the
crown to change the Dual Time
setting.
You can
set the Dual Time in 15-minute
increments.
Crown
Dual Time 24-hour hand
Dual Time minute hand
Dual Time hour hand
3.
Push the crown back in.

Swapping Your Current

Location Time

and Dual Time

Settings

You can swap the time in your current location
with the Dual Time by holding down (B) for
about three seconds.
30
30
After swappingBefore swapping
Dual Time
Dual Time
Current location time
Current location time
Note
If you are using the small hour and
minute hands
for Dual Time, only the
time in your current location will be
swapped with Dual Time. Dates are
not swapped.

Stopwatch

The stopwatch can measure elapsed time up
to 23 hours, 59 minutes, 59.95 seconds.
In addition to normal elapsed time
measurements, the stopwatch also lets you
take
lap
time readings. You can also specify a
target value and have the watch indicate the
difference between a lap time reading and the
target value (lap time).
l
Checking the Difference between a Lap
Time and the Target Time
Note
If an ongoing elapsed time
measurement operation continues
for 24 hours, the measurement will
stop and the stopwatch will reset to
all zeros automatically.
Getting ready
Perform this procedure in the Stopwatch
Mode.
l
Navigating Between Modes
30
Stopwatch Mode

Split Times and Lap Times

Split time
A split time is the time elapsed from the start,
up to any point along the course of an event.
You can use the operation shown below to
take split time readings.
B
D
D
B
Goal
Split 3
Split 2
Split 1
Start
Lap time
A lap time shows the time elapsed during a
specific lap. As with split times, the watch
continues performing elapsed time
measurement internally while a lap time or
split time reading is indicated. The watch
calculates and indicates the difference
between a lap time reading and the target
value.
B
D
D
B
Goal
Lap 3
Lap 2
Lap 1
Start
Note
Lap times
can be viewed with CASIO
WATCH+ after measurement is
complete.
l
Viewing Stopwatch Data

Measuring Elapsed Time

30
Lap evaluation
24-hourMinutes
Hours
Seconds
1/20 (0.05) second
1.
Use the operations below to measure
elapsed time.
The retrograde dial acts as a second
hand for about 30 seconds after a time
measurement operation is started.
B
B
B
B
Stop
Resume
Stop
Start
2.
Press (D) to reset the elapsed time to all
zeroes.
3.
Press (A) twice to return to the Calendar
Mode.

Operation Guide 5512

12

View the manual for the Casio Edifice EQB-800 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-800 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
B
Bishnu pradhanFebruary 9, 2024

Why there is no video for setting time of EQB 800?

Why there is no video for setting time of EQB 800?
zoom-in
View photo

The Casio Edifice EQB-800 is a smartwatch that offers various features and functions for everyday use. Designed with a sleek and stylish appearance, it is suitable for individuals looking for a sophisticated wearable device. One notable feature of the Casio Edifice EQB-800 is its ability to connect to a smartphone via Bluetooth. This enables users to receive notifications such as calls, messages, and emails, directly on their wrist. Additionally, it has a handy alarm function that can be set to multiple time zones, making it convenient for frequent travelers. The Casio Edifice EQB-800 also features a chronograph, which allows users to measure elapsed time accurately. Its stopwatch function is precise and reliable, making it useful for various sports activities or timing events. Furthermore, this smartwatch is equipped with a solar-powered battery, ensuring long-lasting usage without the need for frequent charging. It also has a water resistance rating, making it suitable for daily wear and protection against splashes or brief immersion in water. The Casio Edifice EQB-800 comes with a durable strap, ensuring comfortable and secure wearing throughout the day. Its scratch-resistant mineral glass protects the watch face from everyday wear and tear, ensuring longevity. In conclusion, the Casio Edifice EQB-800 is a stylish and functional smartwatch that offers features such as smartphone connectivity, chronograph, solar-powered battery, and water resistance. With its sleek design and reliable performance, it is a suitable choice for individuals seeking a modern and sophisticated timepiece.

General
BrandCasio
ModelEdifice EQB-800
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-800 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How can I set the time on my Casio Edifice EQB-800?

To set the time on your Casio Edifice EQB-800, you can utilize the Timekeeping Mode. By accessing the Timekeeping Mode, you can adjust the hour, minutes, and seconds to ensure accurate time on your smartwatch.

How can I connect my Casio Edifice EQB-800 to my smartphone?

Connect your Casio Edifice EQB-800 to your smartphone by installing the dedicated Casio Edifice app on your compatible device. Once installed, follow the app's instructions to establish a Bluetooth connection between your watch and smartphone.

How can I customize the date and day display on my Casio Edifice EQB-800?

You can customize the date and day display on your Casio Edifice EQB-800 by accessing the watch's settings through the Mode button. From there, navigate to the Date/Day setting to adjust the format and style of the date and day display according to your preference.

How can I check my heart rate using my Casio Edifice EQB-800?

The Casio Edifice EQB-800 does not have a built-in heart rate monitor. It focuses primarily on timekeeping and connectivity features, rather than fitness-related measurements.

How can I switch between different time zones on my Casio Edifice EQB-800?

Switch between different time zones on your Casio Edifice EQB-800 by utilizing the World Time Mode. By accessing this mode, you can select the desired time zone and adjust the watch accordingly, allowing you to display and track multiple time zones simultaneously.

Is the manual of the Casio Edifice EQB-800 available in English?

Yes, the manual of the Casio Edifice EQB-800 is available in English .

Is your question not listed? Ask your question here

No results