Casio Edifice EQB-800 manual

Casio Edifice EQB-800
7.5 · 1
PDF manual
 · 20 pages
English
manualCasio Edifice EQB-800

Connection

Connecting with a Phone
This section explains how to establish a
Bluetooth connection between a phone that is
paired with the watch.
If the
watch is not paired with the phone you
want to connect with, perform the procedure
under C Pairing the watch with a phoneto
pair them.
1.
Move the
phone close to (within one meter
of) the watch.
2.
X While the
second hand is not pointing to
e, hold down the (C) button for about 2
seconds.
This causes the second hand to move
to 12 o’clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The retrograde
dial hand will move from
“R” to e when a connection is
established between the watch and
phone.
Important!
The watch cannot connect with a
phone while a stopwatch time
measurement operation is in
progress.
If you have problems establishing a
connection, it could mean that
CASIO WATCH+ is not running on
the phone. On the phone’s home
screen, tap the “CASIO WATCH+”
icon. After the app starts up, hold
down the watch’s (C) button for
about 2 seconds.
Note
The connection will be terminated if
you do
not perform any operation on
the watch or phone for a fixed
amount of time.
To specify the connection limit time,
perform the following operation with:
use CASIO WATCH+ to select
“Watch settings” n “Connection
time”, and then specify a setting of 3
minutes, 5 minutes, or 10 minutes.
Disconnecting from a Phone
Pressing any button terminates the Bluetooth
connection and
returns the second hand to its
normal operation.
30
30
After disconnectionConnected
Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or
connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
Y On the Home Screen, tap the “CASIO
WATCH+” icon.
2.
X
Hold down the (C) button for about 2
seconds.
This causes the second hand to move
to 12 o’clock. Keep (C) depressed at
this time until the second hand
completes one full rotation.
The
retrograde
dial hand will move from
“R” to e when a connection is
established between the watch and
phone.
3.
Y Perform the operation shown on the
phone screen to enable or disable auto
time adjustment.
Unpairing
1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
After disconnectionConnected
2.
Y On the Home Screen, tap the “CASIO
WATCH+” icon.
3.
Y
Perform the operation shown on the
phone screen to unpair.
Note
If you
are unable to re-pair the watch
with a phone after unpairing them,
use the procedure below to delete
pairing information from the watch
and then perform the pairing
operation again.
A X Pull out the crown to the second
click.
30
Crown
B X Hold down (D) for about 5
seconds.
This causes the second hand to
perform one
revolution and deletes the
pairing information.
C X Push the crown back in.

Operation Guide 5512

10

View the manual for the Casio Edifice EQB-800 here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-800 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
B
Bishnu pradhanFebruary 9, 2024

Why there is no video for setting time of EQB 800?

Why there is no video for setting time of EQB 800?
zoom-in
View photo

The Casio Edifice EQB-800 is a smartwatch that offers various features and functions for everyday use. Designed with a sleek and stylish appearance, it is suitable for individuals looking for a sophisticated wearable device. One notable feature of the Casio Edifice EQB-800 is its ability to connect to a smartphone via Bluetooth. This enables users to receive notifications such as calls, messages, and emails, directly on their wrist. Additionally, it has a handy alarm function that can be set to multiple time zones, making it convenient for frequent travelers. The Casio Edifice EQB-800 also features a chronograph, which allows users to measure elapsed time accurately. Its stopwatch function is precise and reliable, making it useful for various sports activities or timing events. Furthermore, this smartwatch is equipped with a solar-powered battery, ensuring long-lasting usage without the need for frequent charging. It also has a water resistance rating, making it suitable for daily wear and protection against splashes or brief immersion in water. The Casio Edifice EQB-800 comes with a durable strap, ensuring comfortable and secure wearing throughout the day. Its scratch-resistant mineral glass protects the watch face from everyday wear and tear, ensuring longevity. In conclusion, the Casio Edifice EQB-800 is a stylish and functional smartwatch that offers features such as smartphone connectivity, chronograph, solar-powered battery, and water resistance. With its sleek design and reliable performance, it is a suitable choice for individuals seeking a modern and sophisticated timepiece.

General
BrandCasio
ModelEdifice EQB-800
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-800 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How can I set the time on my Casio Edifice EQB-800?

To set the time on your Casio Edifice EQB-800, you can utilize the Timekeeping Mode. By accessing the Timekeeping Mode, you can adjust the hour, minutes, and seconds to ensure accurate time on your smartwatch.

How can I connect my Casio Edifice EQB-800 to my smartphone?

Connect your Casio Edifice EQB-800 to your smartphone by installing the dedicated Casio Edifice app on your compatible device. Once installed, follow the app's instructions to establish a Bluetooth connection between your watch and smartphone.

How can I customize the date and day display on my Casio Edifice EQB-800?

You can customize the date and day display on your Casio Edifice EQB-800 by accessing the watch's settings through the Mode button. From there, navigate to the Date/Day setting to adjust the format and style of the date and day display according to your preference.

How can I check my heart rate using my Casio Edifice EQB-800?

The Casio Edifice EQB-800 does not have a built-in heart rate monitor. It focuses primarily on timekeeping and connectivity features, rather than fitness-related measurements.

How can I switch between different time zones on my Casio Edifice EQB-800?

Switch between different time zones on your Casio Edifice EQB-800 by utilizing the World Time Mode. By accessing this mode, you can select the desired time zone and adjust the watch accordingly, allowing you to display and track multiple time zones simultaneously.

Is the manual of the Casio Edifice EQB-800 available in English?

Yes, the manual of the Casio Edifice EQB-800 is available in English .

Is your question not listed? Ask your question here

No results