Casio Edifice EQB-1100D manual

Casio Edifice EQB-1100D
7.5 · 1
PDF manual
 · 19 pages
English
manualCasio Edifice EQB-1100D

Checking the Difference

Between the Current and

Previous Lap Times

You can check the difference between the
previous and current lap times while a lap time
measurement operation is in progress.
Using Auto Adjust
Pressing (B) displays the difference between
the current and previous lap times.
A
B
B
B
A
Timing Start 2
Timing Start 1
Stop
Timing Start 3
Timing Start 4
Lap Time 1
Lap Time 2
Lap Time 3
When you measure a lap time, the function
hand indicates the difference between the
current and previous lap times.
From measurement of the second lap time,
you can check the difference between the
current and previous lap times.
To determine the difference between the
current and previous lap times
Same as previous lap time
1 second
slow
2+ seconds
slow
1 second
fast
5 seconds
fast
5+ seconds
fast
Target time indicator

Other Settings

This section explains other watch settings you
can configure.

Configuring Dual Time

Settings

Dual Time lets you keep track of the current
time in another time zone in addition your
current location time.
1. Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock, and the function hand to move
to [DT].
30
Crown
Function hand
2. Rotate the crown to change the Dual Time
setting.
You can set the Dual Time in 15-minute
increments.
30
Dual Time 24-hour
Dual Time hour and minute
3. Push the crown back in.

Configuring Alarm Settings

The watch will beep when the alarm time is
reached.
The beeper is muted in the cases described
below.
ー 
When battery power is low
ー 
When watch is at Level 2 power saving
l
Power Saving
1. Pull out the crown to the first click.
This causes the second hand to move to
12 o’clock, and the function hand to move
to [DT].
30
Crown
Function hand
2. Press (A).
This causes the function hand to move to
[ALM] and turns on the alarm.
3. Rotate the crown to change the alarm time
setting.
Check the 24-hour hand to see if it is
indicating a.m. or p.m. for the alarm
time.
30
Alarm on
Minutes
Hours
Crown
4. Push the crown back in.
To stop the alarm
To stop the alarm after it starts to sound when
an alarm time is reached, press any button.
Note
A beeper sounds for 10 seconds when
an alarm time is reached.
You can also use EDIFICE Connected
to configure alarm time settings.

Operation Guide 5639

13

View the manual for the Casio Edifice EQB-1100D here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-1100D or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Casio Edifice EQB-1100D is a smartwatch that offers an array of features and functionality. With its sleek and stylish design, it is suitable for both casual and formal occasions. One of the key features of the EQB-1100D is its ability to connect to your smartphone via Bluetooth, allowing you to receive notifications for calls, messages, and other apps directly on your wrist. This makes it a convenient companion for those who are constantly on the go. Additionally, the EQB-1100D comes equipped with a range of timekeeping features, including world time with accurate timekeeping in 39 different time zones, a stopwatch function, and a countdown timer. This makes it a practical choice for those who require precise timekeeping in various settings. The watch also boasts a solar power system, meaning that it can be powered by both natural and artificial light, ensuring that you never have to worry about running out of battery. Its water resistance feature allows you to use it in various environments, including swimming and diving. Furthermore, the EQB-1100D features a stainless steel case and band, ensuring durability and longevity. The scratch-resistant mineral glass protects the watch face from everyday wear and tear. Overall, the Casio Edifice EQB-1100D is a versatile and functional smartwatch that offers a range of features tailored to meet the needs of the modern individual. Its stylish design and reliable performance make it a desirable choice for those in search of a dependable timepiece.

General
BrandCasio
ModelEdifice EQB-1100D
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-1100D below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time and date on my Casio Edifice EQB-1100D smartwatch?

To set the time and date on your smartwatch, simply press and hold the upper right button until the city code starts flashing. Use the upper left and lower right buttons to scroll through the city codes and select your desired city. Press the upper right button to confirm. Then, press and hold the upper right button again to set the time and date. Use the upper left and lower right buttons to adjust the values, and press the upper right button to move to the next setting.

How can I connect my smartwatch to my smartphone?

To connect your Casio Edifice EQB-1100D to your smartphone, first, ensure that your smartphone's Bluetooth is turned on. Open the Mobile Link app on your smartphone and tap the "Connect" button. On your smartwatch, press and hold the lower left button until the Bluetooth icon starts flashing. Your phone should detect the smartwatch, and you can select it from the available devices list on your phone. Pair the devices by following the on-screen instructions on both the smartwatch and your smartphone.

How can I adjust the strap length of my smartwatch?

To adjust the strap length of your Casio Edifice EQB-1100D, locate the metal pins on the back of the strap. Using a small pointed tool like a pin or a toothpick, press the pins inwards. This will release them from the holes in the strap. Slide the strap to your desired length and secure it by inserting the pins back into the corresponding holes. Ensure that the pins are fully inserted to avoid any strap detachment issues.

Can I change the watch face on my smartwatch? If so, how?

Yes, you can change the watch face on your Casio Edifice EQB-1100D. Press and hold the lower left button on your smartwatch until the watch face enters the edit mode. Use the upper left and lower right buttons to navigate through the available watch face options. Once you find a watch face you like, press the upper right button to confirm your selection. Your smartwatch will then display the newly selected watch face.

How can I check the battery level of my smartwatch?

To check the battery level of your Casio Edifice EQB-1100D, press and hold the lower right button on your smartwatch. This will display various information sections. Look for the battery indicator, typically shown as a battery icon with a percentage displayed next to it. The percentage indicates the remaining battery life of your smartwatch, allowing you to ensure it is charged adequately.

Is the manual of the Casio Edifice EQB-1100D available in English?

Yes, the manual of the Casio Edifice EQB-1100D is available in English .

Is your question not listed? Ask your question here

No results