Casio Edifice EQB-1100D manual

Casio Edifice EQB-1100D
7.5 · 1
PDF manual
 · 19 pages
English
manualCasio Edifice EQB-1100D

Flyback Timing (Lap Timing)

30
SecondsHours, minutes
Hours (24-hour time)
1. In the Calendar Mode, press (A).
l
Navigating Between Modes
This enters the Stopwatch Mode and
starts an elapsed time measurement
operation.
Each press of (B) causes the elapsed time
of the section (lap time) to be shown for
about 10 seconds.
A
B
B
A
Timing Start 3
Timing Start 2
Timing Start 1
Stop
Elapsed time measurement for the next
lap continues internally during the
approximately 10 seconds that the lap
time is shown.
When the elapsed time exceeds 10
seconds, the second hand will return to
indicating of the current lap time.
Pressing (B) when the next lap time is
10 seconds or less will display that lap
time.
2. Press (B) to reset the elapsed time to all
zeros.
To return to the Calendar Mode, reset
the stopwatch to all zeros and then
press (B).
Lap Times
A lap time is the time elapsed during a specific
lap or segment. Lap times are recorded
internally by the watch. The watch displays the
elapsed time of the current lap.
A
Start
B
Lap Time 1
B
A
Goal
Lap Time 2
Lap Time 3
Note
Lap times can be viewed with EDIFICE
Connected after measurement is
complete.
l
Viewing Stopwatch Data

Example: Recording a Race

Lap Time

This section explains how to record lap times
while watching a race. It also shows how you
can view lap times with EDIFICE Connected
after the race is over.
l
Lap Times
30
During a race
Measure lap times.
1. In the Calendar Mode, press (A).
l
Navigating Between Modes
This enters the Stopwatch Mode and
starts an elapsed time measurement
operation.
30
2. Use the operations below to perform a
timer operation.
A
B
B
A
Stop
Timing Start 1
Timing Start 2
Timing Start 3
Pressing (B) at the end of each lap will
record them in watch memory.
Lap times are recorded in 1/1000-
second units during the first hour of an
elapsed time measurement operation.
3. Press (B) to reset the elapsed time to all
zeros.
To return to the Calendar Mode, reset
the stopwatch to all zeros and then
press (B).
After a race
After the race is finished, you can view the
measured lap times with EDIFICE Connected.
l
Sending Stopwatch Data to a Phone
l
Checking a Lap Time

Operation Guide 5639

12

View the manual for the Casio Edifice EQB-1100D here, for free. This manual comes under the category smartwatch and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-1100D or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

The Casio Edifice EQB-1100D is a smartwatch that offers an array of features and functionality. With its sleek and stylish design, it is suitable for both casual and formal occasions. One of the key features of the EQB-1100D is its ability to connect to your smartphone via Bluetooth, allowing you to receive notifications for calls, messages, and other apps directly on your wrist. This makes it a convenient companion for those who are constantly on the go. Additionally, the EQB-1100D comes equipped with a range of timekeeping features, including world time with accurate timekeeping in 39 different time zones, a stopwatch function, and a countdown timer. This makes it a practical choice for those who require precise timekeeping in various settings. The watch also boasts a solar power system, meaning that it can be powered by both natural and artificial light, ensuring that you never have to worry about running out of battery. Its water resistance feature allows you to use it in various environments, including swimming and diving. Furthermore, the EQB-1100D features a stainless steel case and band, ensuring durability and longevity. The scratch-resistant mineral glass protects the watch face from everyday wear and tear. Overall, the Casio Edifice EQB-1100D is a versatile and functional smartwatch that offers a range of features tailored to meet the needs of the modern individual. Its stylish design and reliable performance make it a desirable choice for those in search of a dependable timepiece.

General
BrandCasio
ModelEdifice EQB-1100D
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-1100D below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time and date on my Casio Edifice EQB-1100D smartwatch?

To set the time and date on your smartwatch, simply press and hold the upper right button until the city code starts flashing. Use the upper left and lower right buttons to scroll through the city codes and select your desired city. Press the upper right button to confirm. Then, press and hold the upper right button again to set the time and date. Use the upper left and lower right buttons to adjust the values, and press the upper right button to move to the next setting.

How can I connect my smartwatch to my smartphone?

To connect your Casio Edifice EQB-1100D to your smartphone, first, ensure that your smartphone's Bluetooth is turned on. Open the Mobile Link app on your smartphone and tap the "Connect" button. On your smartwatch, press and hold the lower left button until the Bluetooth icon starts flashing. Your phone should detect the smartwatch, and you can select it from the available devices list on your phone. Pair the devices by following the on-screen instructions on both the smartwatch and your smartphone.

How can I adjust the strap length of my smartwatch?

To adjust the strap length of your Casio Edifice EQB-1100D, locate the metal pins on the back of the strap. Using a small pointed tool like a pin or a toothpick, press the pins inwards. This will release them from the holes in the strap. Slide the strap to your desired length and secure it by inserting the pins back into the corresponding holes. Ensure that the pins are fully inserted to avoid any strap detachment issues.

Can I change the watch face on my smartwatch? If so, how?

Yes, you can change the watch face on your Casio Edifice EQB-1100D. Press and hold the lower left button on your smartwatch until the watch face enters the edit mode. Use the upper left and lower right buttons to navigate through the available watch face options. Once you find a watch face you like, press the upper right button to confirm your selection. Your smartwatch will then display the newly selected watch face.

How can I check the battery level of my smartwatch?

To check the battery level of your Casio Edifice EQB-1100D, press and hold the lower right button on your smartwatch. This will display various information sections. Look for the battery indicator, typically shown as a battery icon with a percentage displayed next to it. The percentage indicates the remaining battery life of your smartwatch, allowing you to ensure it is charged adequately.

Is the manual of the Casio Edifice EQB-1100D available in English?

Yes, the manual of the Casio Edifice EQB-1100D is available in English .

Is your question not listed? Ask your question here

No results