Casio Edifice EQB-1000 manual

Casio Edifice EQB-1000
8 · 4
PDF manual
 · 18 pages
English
manualCasio Edifice EQB-1000
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “EDIFICE Connected” icon.
3.
Y
Perform the operation shown on the
screen of the phone to be paired with.
If a pairing prompt message appears,
perform the operation shown on the
phone screen.
About two seconds after pairing starts,
the second hand will point to [R]. When
pairing is complete, the second hand
will move to
e
.
Note
The first time you start up EDIFICE
Connected, a message will appear on
your phone asking if you want to
enable location information
acquisition. Configure settings to allow
background use of location
information.

Auto Time Adjustment

The watch will connect with a phone at preset
times each day and adjust its time settings.
Using Auto Adjust
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave the watch in the Calendar Mode, it will
perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
The watch may not be able to perform
auto time adjustment under the
conditions described below.
While the watch is too far away from
its paired phone
While communication is not possible
due to radio interference, etc.
While the phone is updating its
system
While EDIFICE Connected is not
running on the phone
Note
If the watch does not indicate the
correct time even if it is able to connect
with a phone, adjust the hand and day
indicator positions.
l
Adjusting Hand and Day Indicator
Alignment
If there is a World Time City specified
with EDIFICE Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
Triggering Immediate Time Adjustment
The watch’s time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to adjust the watch’s time
setting based on your phone's time, perform
the procedure below to connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2.
X
Enter the Calendar Mode.
l
Navigating Between Modes
3.
X
Hold down (B) for at least 0.5 seconds
until the second hand points to [R].
Release the button as soon as the second
hand points to [R].
When the watch connects with a phone,
the second hand will normally move to
e
and then the watch’s time setting will be
adjusted.
The connection is terminated
automatically after time adjustment is
complete.
30
30
After time adjustmentConnected

Viewing Stopwatch Data

This section explains how to send lap times
(up to 200 records) that are stored in watch
memory, as well as other data to your phone
for viewing with EDIFICE Connected.
Sending Stopwatch Data to a Phone
Use the procedure below to send data from
the watch to a phone.
1.
Y
Tap the “EDIFICE Connected” icon.
2.
X
Hold down (B) for at least two seconds
until the second hand points to [R] twice.
This establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to transfer data measured
by the watch to the phone.
After data transfer is complete, a list of the
measurement data will appear on the
phone display.
Tapping a stopwatch data item displays
its details.
Checking a Lap Time
Use EDIFICE Connected to check the data
you sent to the phone.
1.
Y
Tap the “EDIFICE Connected” icon.
2.
Y
Perform the operation shown on the
phone screen to view the measurement
data you want.
Note
Tapping “Edit” displays a screen that
you can use to change the data item
title and to delete lap time data.

Operation Guide 5604

7

View the manual for the Casio Edifice EQB-1000 here, for free. This manual comes under the category smartwatch and has been rated by 4 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
W
WilhelmApril 27, 2024

does the EQB 1000 have radio wave ceptor? What if I have no mobile phone for bluetooth pairing?

The Casio Edifice EQB-1000 is a smartwatch that offers a range of features and functionality. It is designed to provide users with a convenient and stylish way to stay connected and track their activities. With its sleek and modern design, the Edifice EQB-1000 is a visually appealing accessory. The watch comes in a variety of colors, allowing users to choose the one that best fits their personal style. One of the key features of the Edifice EQB-1000 is its ability to connect to a smartphone. This allows users to receive notifications directly on their wrist, such as incoming calls, messages, and calendar reminders. The watch also offers the ability to control smartphone functions, such as music playback and camera shutter. In terms of activity tracking, the Edifice EQB-1000 provides a range of features. It has a built-in step counter, allowing users to track their daily physical activity. The watch also includes a heart rate monitor, providing users with real-time information on their heart rate during workouts. Furthermore, the Edifice EQB-1000 offers world time functionality, allowing users to easily keep track of time in different cities around the world. It also features a stopwatch and timer, which can be useful for various activities. Overall, the Casio Edifice EQB-1000 is a stylish and functional smartwatch that offers a range of features to enhance the user's convenience and tracking abilities.

General
BrandCasio
ModelEdifice EQB-1000
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-1000 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time and date on my Casio Edifice EQB-1000?

To set the time and date on your Casio Edifice EQB-1000, press the lower left button to enter timekeeping mode. Then, use the upper and lower buttons on the right side of the watch to navigate and adjust the time and date accordingly.

How can I change the watch's time zone?

To change the time zone on your Casio Edifice EQB-1000, press the lower left button to enter timekeeping mode. Then, press and hold the upper left button until "CTY" is displayed. Use the upper and lower buttons on the right side of the watch to scroll and select your desired city or time zone.

How do I set an alarm on my smartwatch?

To set an alarm on your Casio Edifice EQB-1000, press the lower left button to enter timekeeping mode. Then, press the upper left button to enter alarm mode. Once in alarm mode, use the upper and lower buttons on the right side of the watch to navigate and set the desired alarm time. Press the upper left button again to confirm and save the alarm setting.

How can I track my activity or steps on the smartwatch?

To track your activity or steps on your Casio Edifice EQB-1000, press the lower left button to enter the activity tracking mode. The smartwatch will automatically start counting your steps and display them on the screen. You can also view additional information like distance, calories burned, and activity targets by using the upper and lower buttons on the right side of the watch to navigate through the activity tracking features.

How do I connect my smartwatch to my smartphone?

To connect your Casio Edifice EQB-1000 to your smartphone, ensure that both devices have Bluetooth enabled. Download and install the Casio Edifice app on your smartphone. Open the app and follow the on-screen instructions to pair and connect your smartwatch. Once connected, you can enjoy additional features and functionalities, such as receiving notifications, controlling music playback, and syncing data between your devices.

Is the manual of the Casio Edifice EQB-1000 available in English?

Yes, the manual of the Casio Edifice EQB-1000 is available in English .

Is your question not listed? Ask your question here

No results