Casio Edifice EQB-1000 manual

Casio Edifice EQB-1000
8 · 4
PDF manual
 · 18 pages
English
manualCasio Edifice EQB-1000
Stopwatch Mode
The second hand, and the small hour and
minute hands indicate the elapsed stopwatch
time.
The main hour and minute hands indicate
the current time.
30
①②
④⑤
Start/Stop
Reset/Flyback
A
Stopwatch hours
B
Stopwatch minutes
C
Stopwatch seconds
D
Stopwatch hours (24-hour time)
The hand points to the A-side for hours 0
through 11, and to the P-side for hours 12
through 23.
E
Target time indicator
Shows the difference between the current and
previous lap times.
Alarm
The small hour and minute hands indicate the
alarm time.
The second hand indicates the alarm enabled/
disabled setting.
The main hour and minute hands indicate
the current time.
30
Enabling/
Disabling the
Alarm
A
Alarm enabled/disabled
B
Alarm minute
C
Alarm hour
D
Alarm hour (24-hour time)
The hand points to the A-side for a.m. times,
and to the P-side for p.m. times.

Using the Crown

Fast Forward/Fast Reverse
Second click
First click
Normal timekeeping
Crown
Important!
To prevent loss of water resistance
and/or damage due to impact, be sure
to push the crown in to its normal
position after you are finished using it.
When pushing the crown back in, take
care not to apply too much force.
After pulling out the crown to the first or second
click, rotating it quickly in succession in either
direction will start a fast forward or fast reverse
operation. While a fast forward operation is in
progress, quickly rotating the crown in
succession again will increase the speed even
further.
Stopping Fast Forward/Fast Reverse
Rotate the crown in the direction opposite that
of the ongoing operation or press any button.
Note
If you do not perform any operation for
about two minutes after pulling out the
crown, crown operations will
automatically become disabled. If that
happens, push the crown back in and
then pull it out again.

Hand and Day Indicator

Movement

30
Function hand
Day indicator
Function Hand and Day Indicator
Movement
Changing the day setting of the watch will also
cause the function hand to move.
Day
It can take anywhere from about 50 seconds
to about 3 minutes and 20 seconds for the
day indicator to change after timekeeping
reaches midnight. At this time, the function
hand moves as the day indicator changes.
The day may not be indicated correctly
while the watch’s crown is pulled out.

Operation Guide 5604

3

View the manual for the Casio Edifice EQB-1000 here, for free. This manual comes under the category smartwatch and has been rated by 4 people with an average of a 8. This manual is available in the following languages: English. Do you have a question about the Casio Edifice EQB-1000 or do you need help? Ask your question here

Need help?

Do you have a question about the Casio and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 1
W
WilhelmApril 27, 2024

does the EQB 1000 have radio wave ceptor? What if I have no mobile phone for bluetooth pairing?

The Casio Edifice EQB-1000 is a smartwatch that offers a range of features and functionality. It is designed to provide users with a convenient and stylish way to stay connected and track their activities. With its sleek and modern design, the Edifice EQB-1000 is a visually appealing accessory. The watch comes in a variety of colors, allowing users to choose the one that best fits their personal style. One of the key features of the Edifice EQB-1000 is its ability to connect to a smartphone. This allows users to receive notifications directly on their wrist, such as incoming calls, messages, and calendar reminders. The watch also offers the ability to control smartphone functions, such as music playback and camera shutter. In terms of activity tracking, the Edifice EQB-1000 provides a range of features. It has a built-in step counter, allowing users to track their daily physical activity. The watch also includes a heart rate monitor, providing users with real-time information on their heart rate during workouts. Furthermore, the Edifice EQB-1000 offers world time functionality, allowing users to easily keep track of time in different cities around the world. It also features a stopwatch and timer, which can be useful for various activities. Overall, the Casio Edifice EQB-1000 is a stylish and functional smartwatch that offers a range of features to enhance the user's convenience and tracking abilities.

General
BrandCasio
ModelEdifice EQB-1000
Productsmartwatch
LanguageEnglish
FiletypeUser manual (PDF), Quickstart Guide (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Casio Edifice EQB-1000 below.

Does a smartwatch have functionalities that a smartphone does not have?

In general, a smartwatch has no functionalities that a smartphone does not have.

Do I need to switch off my smartwatch at night?

It is sensible for you to switch off your smartwatch at night, this ensures longer battery life.

Do I need internet for GPS?

No, no internet is required to receive GPS.

What does the abbreviation GPS stand for?

The abbreviation GPS stands for 'Global Positioning System'.

What is GPS?

GPS is a system that can be used all over the globe to determine your location by means of satellites.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

How do I set the time and date on my Casio Edifice EQB-1000?

To set the time and date on your Casio Edifice EQB-1000, press the lower left button to enter timekeeping mode. Then, use the upper and lower buttons on the right side of the watch to navigate and adjust the time and date accordingly.

How can I change the watch's time zone?

To change the time zone on your Casio Edifice EQB-1000, press the lower left button to enter timekeeping mode. Then, press and hold the upper left button until "CTY" is displayed. Use the upper and lower buttons on the right side of the watch to scroll and select your desired city or time zone.

How do I set an alarm on my smartwatch?

To set an alarm on your Casio Edifice EQB-1000, press the lower left button to enter timekeeping mode. Then, press the upper left button to enter alarm mode. Once in alarm mode, use the upper and lower buttons on the right side of the watch to navigate and set the desired alarm time. Press the upper left button again to confirm and save the alarm setting.

How can I track my activity or steps on the smartwatch?

To track your activity or steps on your Casio Edifice EQB-1000, press the lower left button to enter the activity tracking mode. The smartwatch will automatically start counting your steps and display them on the screen. You can also view additional information like distance, calories burned, and activity targets by using the upper and lower buttons on the right side of the watch to navigate through the activity tracking features.

How do I connect my smartwatch to my smartphone?

To connect your Casio Edifice EQB-1000 to your smartphone, ensure that both devices have Bluetooth enabled. Download and install the Casio Edifice app on your smartphone. Open the app and follow the on-screen instructions to pair and connect your smartwatch. Once connected, you can enjoy additional features and functionalities, such as receiving notifications, controlling music playback, and syncing data between your devices.

Is the manual of the Casio Edifice EQB-1000 available in English?

Yes, the manual of the Casio Edifice EQB-1000 is available in English .

Is your question not listed? Ask your question here

No results